Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: alexlind_com_au---chinawoodoilpds.asp
                                         DATA SHEET
FEAST WATSON China Wood Oil
PRODUCT CODE 872-94793 Data Sheet No. AUDW0733
APPROVALS

Description

Feast Watson China Wood Oil is a traditional penetrating oil that contains genuine Tung oil. It is designed to penetrate deeply into
timber, resulting in a natural matt finish. China Wood Oil is quick and easy to apply, resistant to water and spills.


Features Benefits

Penetrating Oil Quick & easy to apply
Genuine Tung Oil Environmentally responsible
Flexible film Allows significant timber movement
Matt Lustre Timber looks natural
Free flowing Use brush, roller, cloth, or applicator


Uses
China Wood Oil is suitable for all interior timbers including floors, benchtops and furniture.


Performance Guide

Weather For interior use only, not recommended for Salt Unaffected by splash or spillage
exterior use.
Good water resistance.
Up to 120C. Premature yellowing and Water
Heat
embrittlement will occur if subjected to
continuous heat.
Solvent Resists alcohol and hydrocarbons. Abrasion N/A
Suitable for splash only with dilute alkali
Acid Suitable for splash only with dilute acid Alkali


Typical Properties and Application Data

Gloss Level < 10% at 85 degrees Thinner Mineral Turpentine
Gloss Level Ind Spread Rate 0.0 sqm/L
Components 1.0
Volume Solids 45.0

Colour Honey colour Toxicity Lead free. Dry film is non-toxic and
conforms to AS1647, Part 3.
Number of Coats 3 Wet film per coat Recommended 0 碌m
Dry film per coat Recommended 0 碌m
Recoat 3 Hours
Touch Dry 1 - 3 Hours


Application Method




Data Sheet FEAST WATSON China Wood Oil
DuSpec Data Code AUDW0733 Page No 1 of 3
Issue No 3.0 Date Issued 23/01/2006
DATA SHEET
FEAST WATSON China Wood Oil
Data Sheet No. AUDW0733

Application Guide
Surface Preparation
Prior to application, sand and clean the surface thoroughly to ensure it is free from dirt, oil, wax and grease. For previously coated
timber, ensure that the old finish is completely removed. All nail holes should be punched below the surface and filled with Feast
Watson Timberfill Putty. Sanding dust should be removed by vacuuming. For best results on smaller items, use 220 grit (or finer)
sandpaper for final sanding. For floors, use a 150 mesh screen for the final sanding.
Application Procedure and Equipment
Apply a liberal coat of China Wood Oil to the timber with a brush, roller, clean cloth or Feast Watson lambswool applicator. Ensure
the surface is evenly coated. Leave China Wood Oil to soak into the timber for 45 60 minutes and then wipe off any excess product
with a clean cloth. Allow 3 hours to dry and then lightly sand. On floors, sand between coats using either a buffing pad, a worn 150
mesh screen or 400 grit sandpaper. Apply a second and third coat of China Wood Oil as outlined above. After final coat all excess
China Wood Oil must be removed. For best results on smaller items use extra fine steel wool (000) or 600 grit wet and dry paper. ,
sand smaller items with 600 grit wet and dry paper and buff with a clean cloth.
Staining:
Seal soft porous timbers with one coat of China Wood Oil before staining. Add up to a maximum of 10% Feast Watson Prooftint to
the China Wood Oil. Apply as above.
Brush, pad, cloth, or short nap Roller
Notes
If desired, buff floors after the final coat using a buffing machine (300 revs/minute) and a white pad. Finish with a dry buffing pad.


Health and Safety

MSDS 7484 Health Effects For detailed information refer to product label
Number and the current Material Safety Data Sheet
available through Sales and Customer Service
Offices. Health Effects: Splashes to eyes will
cause irritation. Prolonged contact with liquid is
harmful and inhalation of vapour and spray
mists may produce respiratory irritation and
headaches.
Protective Personal Protective Equipment: Wear eye
Flammability Flammability: This product is flammable
Equipment protection, protective clothing and gloves, and if
spraying wear a respirator with a combined
vapour/particulate cartridge.
Disposal Do not dispose down the drain. Refer to your
local council for correct disposal procedures

In the case of emergency please call 1800 033 111


Precautions and Limitations

Do not apply product if temperature is below 10掳c or above 30掳. This product is for INTERIOR USE ONLY.


Transport and Storage

Pack A 872-94793
Sizes 10 Litre 4 Litre 1 Litre Flash point 43c
1263
Weight 10.5kg 4.0kg 1.1kg UN Number
Dangerous 3 Package III
Goods Class Group
Shipment PAINTS
Name



Data Sheet FEAST WATSON China Wood Oil
DuSpec Data Code AUDW0733 Page No 2 of 3
Issue No 3.0 Date Issued 23/01/2006
DATA SHEET
FEAST WATSON China Wood Oil
Data Sheet No. AUDW0733
Disclaimer
Dulux and Other marks followed by 庐 are registered trademarks. Marks followed by the symbol of 鈩? are trademarks.
The data provided within the Duspec system is correct at the time of publication, however it is the responsibility of those using this information to
check that it is current prior to specifying or using any of these coating systems.
DISCLAIMER: Any advice, recommendation, information, assistance or service provided by any of the divisions of Orica Consumer Products in
relation to goods manufactured by it or their use and application is given in good faith and is believed by Orica Consumer Products to be appropriate
and reliable. However, any advice, recommendation, information, assistance or service provided by Orica Consumer Products is provided without
liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred
upon any person or the liabilities imposed upon Orica Consumer Products by any condition or warranty implied by Commonwealth, State or
Territory Act or ordinance void or prohibiting such exclusion limitation or modification. Coating systems can be expected to perform as indicated on
the Duspec Spec Sheet so long as applications and application procedures of the individual products are followed as recommended on the
appropriate Product data Sheet. "Orica" "Dulux" "Berger" "Berger
Gold Label" "Hadrian" "Walpamur" "Levene" "Acratex" and Other marks followed by 庐 are registered trademarks of Orica Australia Pty Ltd ABN 99
004 117 828. Marks followed by the symbol 鈩? are trademarks.

Please note that this document is only valid for 60 days from the date of issue.

Orica Consumer Products 1970 Princes Highway Clayton, Victoria 3168 AU ABN 99 004 117 828




Data Sheet FEAST WATSON China Wood Oil
DuSpec Data Code AUDW0733 Page No 3 of 3
Issue No 3.0 Date Issued 23/01/2006

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
alexlind_com_au---bostik_ultralevel_slmsds.asp N/A
alexlind_com_au---bostik_ultrasetmsds.asp N/A
alexlind_com_au---bostik_ultra_np_primermsds.asp N/A
alexlind_com_au---bostik_ultra__np__primerpds.asp N/A
alexlind_com_au---chinawoodoilpds.asp N/A
alexlind_com_au---d519estapolglosssatinandmattpds.asp N/A
alexlind_com_au---deckingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---deckingoilpds.asp N/A
alexlind_com_au---deckingstainpds.asp N/A
alexlind_com_au---dimension4pds.asp N/A
alexlind_com_au---duothane_partapds.asp N/A
alexlind_com_au---dwdpds.asp N/A
alexlind_com_au---endure2packmsds.asp 872-50-4 34590-94-8
alexlind_com_au---exterioroilpds.asp N/A
alexlind_com_au---finebuffingoilpds.asp N/A
alexlind_com_au---flatproofpds.asp N/A
alexlind_com_au---floorcleanpds.asp N/A
alexlind_com_au---floorclearglosspds.asp N/A
alexlind_com_au---floorproofglosspds.asp N/A
alexlind_com_au---floorproofthinnersmsds.asp 1330-20-7 108-65-6
alexlind_com_au---floorproofthinnerspds.asp N/A
alexlind_com_au---floorsealpds.asp N/A
alexlind_com_au---floortecglosspds.asp N/A
alexlind_com_au---fungishieldpds.asp N/A
alexlind_com_au---gardenfurnitureoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---hard_burnishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---highbuildenduremsds.asp 872-50-4 34590-94-8
alexlind_com_au---hispeedfinishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---limingsolutionpds.asp N/A
alexlind_com_au---mastertouchpolishmsds.asp N/A
alexlind_com_au---mastertouchpolishpds.asp N/A
alexlind_com_au---maxithanecleanupsolventpds.asp N/A
alexlind_com_au---maxithaneglossnypds.asp N/A
alexlind_com_au---maxithaneglosspds.asp N/A
alexlind_com_au---maxithanereducerpds.asp N/A
alexlind_com_au---maxithanesatinpds.asp N/A
alexlind_com_au---maxithanewetedgeextendermsds.asp 148462-57-1 148462-58-2 872-50-4
alexlind_com_au---modifiedoilsatinpds.asp N/A
alexlind_com_au---monothanehs50glosspds.asp N/A
alexlind_com_au---proofsealpds.asp N/A
alexlind_com_au---prooftinitpds.asp N/A
alexlind_com_au---quicksteppds.asp N/A
alexlind_com_au---renewmsds.asp N/A
alexlind_com_au---sandingsealerpds.asp N/A
alexlind_com_au---scandinavianoilpds.asp N/A
alexlind_com_au---seamasterpsd.asp N/A
alexlind_com_au---sparmarinepds.asp N/A
alexlind_com_au---squeakycleanmsds.asp N/A
alexlind_com_au---timberfillpds.asp N/A
alexlind_com_au---timbersealpds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC