M.S.D.S. - Material Safety Data Sheet
A U S T R A L IA N S P E C IA L T Y
W A T E R B O R N E C O A T IN G S
PTY LTD ACN 070 919 854
2 B r o o k s C ir c u it , W o o d c r o ft , S . A . 5162
ENDURE 2 PACK NON-TOXIC
POLYURETHANE
Not hazardous according to the criteria of Worksafe Australia
IDENTIFICATION
Other names - Water based Polyurethane Dispersion
clear timber coating
HAZCHEM code : Not applicable - non hazardous
UN No : Not assigned
D.G. Class and Sub risk : Not applicable - non hazardous
Packaging Group : Not applicable
Use : Protective coating for timber floors
PHYSICAL DESCRIPTION AND PROPERTIES
Appearance : Off-white colour free flowing liquid
Boiling Point : 100 deg C from water content
Vapour pressure : That of water
Specific Gravity : 1.03
Flammability limits : Not Flammable
Solubility in Water : Completely miscible
Odour : Faint sweet odour
INGREDIENTS
Chemical Entity Proportion
Polyurethane dispersion blend - CAS 872-50-4 30 - 50 %
Alkoxy Alcohol - CAS 34590-94-8 2 - 8%
Detergents - max 1%
Other - max 1%
1
Issue No. - 1 File Reference MSDS endure 2 Pack.doc
Issued By - P. Holgate Date of Issue - 1 Jan 2004
HEALTH HAZARD INFORMATION
Endure 2 Pack is extremely safe to use and are classified as non - hazardous by
the criterion of the regulatory body Worksafe Australia
Dried film is completely inert and non-hazardous.
HEALTH EFFECTS
Eye Avoid eye contact. Material may sting when in contact.
Skin No adverse health effects known, however material may dry on
skin and be then difficult to remove.
Ingestion No information available but would expect to cause nausea in
sufficient quantity.
FIRST AID
Swallowed Rinse mouth with water. If vomiting occurs, only give water.
Contact the poisons information centre and quote waterbased
Polyurethane dispersion paint as the material.
Eye Irrigate immediately with water for at least 5 minutes.
If irritation persists, consult a doctor.
Inhalation Endure 2 Pack does not contain TDI ( Toluene Diisocyanate). If
overcome by vapours, remove to fresh air. If discomfort after
30 minutes consult a doctor.
PRECAUTIONS FOR USE
Exposure Standards None established due to non - hazardous classification
Personal Protection
Eyes Good practice for any liquid is to wear eye protection
Respiratory No respirator is required, but good ventilation in any
confined area is recommended
Skin No protection is required, although avoid or minimise
contact. Wearing of gloves with any coating or chemical
preparation is always a good practice. Wash skin area if
coating contacts it as dried coating can be difficult to
remove.
2
Issue No. - 1 File Reference MSDS endure 2 Pack.doc
Issued By - P. Holgate Date of Issue - 1 Jan 2004
Flammability No protection required as non - flammable
SAFE HANDLING INFORMATION
Storage and transport Not defined as a Dangerous Good by the
Australian Code for the Transport of Dangerous
Goods by Road and Rail.
To ensure quality of material store below 45 deg
Centigrade and prevent from freezing.
Spills Contain with sawdust or absorbent..
Once absorbed the non liquid mass can be
disposed of in normal land fill
Fire and Explosion Resin components can burn once water carrier is
removed and produce toxic vapours of Nitrogen
and carbon compounds.
Disposal Liquid Enviropro waste from job leftover or
from the applicator bucket, should not be
washed into the sewer or storm water system.
Enviropro coatings can be solidified by addition of
Vinegar which will coagulate them.
Filter off the solidified Enviropro into a nylon
stocking.
The solids in the stocking can be disposed off into
normal land fill once dried out.
CONTACT POINT
Australian Specialty Waterborne Coatings Pty Ltd
2 Brooks Circuit , Woodcroft, S.A. 5162
or Phil Holgate on 7 day mobile hot line contact
0414 793 237
3
Issue No. - 1 File Reference MSDS endure 2 Pack.doc
Issued By - P. Holgate Date of Issue - 1 Jan 2004
|