Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: alexlind_com_au---floortecglosspds.asp
                                           DATA SHEET
INTERGRAIN Floortec Gloss
PRODUCT CODE 521-94800 Data Sheet No. AUDW0759
APPROVALS

Description

Intergrain Floortec is a tough, clear, water based polyurethane formulated for high wear areas such as parquetry, cork and timber
flooring and benchtops. Floortec is low odour and quick drying, enabling floors to be finished within a day.


Features Benefits

Water soluble Fast dry, easy clean-up
"Water white" clarity Retains natural colour of timber
Polyurethane resin Tough hard wearing
Low odour Fast recoat time


Uses

Use Intergrain Floortec on timber floors, bench tops, cork and interior timbers subject to high wear and tear.


Performance Guide

Weather For interior use only, not recommended for Salt Unaffected by splash or spillage
exterior use.
Good water resistance.
Up to 120C. Premature yellowing and Water
Heat
embrittlement will occur if subjected to
continuous heat.
Solvent Resists splashes of alcohol and hydrocarbons. Abrasion Excellent resistance to abrasion.
Alkali Suitable for splash
Acid Suitable for splash


Typical Properties and Application Data

Gloss Level 80% at 85 degrees Thinner Water
Gloss Level Ind Spread Rate 13.0 sqm/L
Components 1.0
Volume Solids 26.0

Colour Clear Toxicity Lead free. Dry film is non-toxic and
conforms to AS1647, Part 3.
Number of Coats 3 Wet film per coat Recommended 77 碌m
Dry film per coat Recommended 20 碌m
Recoat 3 Hours
Touch Dry 30 Minutes


Application Method




Data Sheet INTERGRAIN Floortec Gloss
DuSpec Data Code AUDW0759 Page No 1 of 3
Issue No 3.0 Date Issued 23/01/2006
DATA SHEET
INTERGRAIN Floortec Gloss
Data Sheet No. AUDW0759

Application Guide
Surface Preparation
Lightly sand dressed surfaces in the direction of the grain, to achieve a uniform surface. Clean oily timbers such as, Brushbox,
Spotted Gum, Cypress and Tallowwood and timbers rich in Tannin with methylated spirits and allow to dry. Fill nail holes using
Intergrain Woodblend after 1st coat of Floortec.
Application Procedure and Equipment
Stir contents thoroughly before and during use with a broad flat stirrer. Apply by brush, or lambswool applicator. Making sure that
application tools are free of loose fibres. Apply an even coat using moderate pressure on the applicator or brush. Avoid excessive
working of the product and higher than recommended film build per coat, which can cause air entrapment and bubbles. Allow three
hours drying ( see temperatures below ) then sand lightly to remove raised grain, vacuum to remove sanding dust. Repeat
procedure on second and third coats. Full curing will be achieved in approx. 72 hours ( see temperatures below )
Brush or pad, or spray


Health and Safety

MSDS 145509 Health Effects For detailed information refer to product label
Number and the current Material Safety Data Sheet
available through Sales and Customer Service
Offices. Health Effects: Splashes to eyes will
cause irritation. Prolonged contact with liquid is
harmful and inhalation of vapour and spray
mists may produce respiratory irritation and
headaches.
Flammability: This product is non-flammable Protective Personal Protective Equipment: Wear eye
Flammability
Equipment protection, protective clothing and gloves, and if
spraying wear a respirator with a combined
vapour/particulate cartridge.
Disposal Do not dispose down the drain. Refer to your
local council for correct disposal procedures

In the case of emergency please call 1800 033 111


Precautions and Limitations

Do not apply product if temperature is below 10c or is likely to fall below 10c during its drying period.
All timber should be close to equilibrium moisture, usually 10 -15%, but not exceeding 15%, for satisfactory application. For interior
use only. Do not spray or roll.


Transport and Storage

Pack A 521-94800
Sizes 10 Litre 4 Litre 1 Litre Flash point NA
UN Number NA
Weight 12kg 4.6kg 1.2kg
Dangerous NA Package NA
Goods Class Group
Shipment Not dangerous goods.
Name No special transport requirements.




Data Sheet INTERGRAIN Floortec Gloss
DuSpec Data Code AUDW0759 Page No 2 of 3
Issue No 3.0 Date Issued 23/01/2006
DATA SHEET
INTERGRAIN Floortec Gloss
Data Sheet No. AUDW0759
Disclaimer
Dulux and Other marks followed by 庐 are registered trademarks. Marks followed by the symbol of 鈩? are trademarks.
The data provided within the Duspec system is correct at the time of publication, however it is the responsibility of those using this information to
check that it is current prior to specifying or using any of these coating systems.
DISCLAIMER: Any advice, recommendation, information, assistance or service provided by any of the divisions of Orica Consumer Products in
relation to goods manufactured by it or their use and application is given in good faith and is believed by Orica Consumer Products to be appropriate
and reliable. However, any advice, recommendation, information, assistance or service provided by Orica Consumer Products is provided without
liability or responsibility PROVIDED THAT the foregoing shall not exclude, limit, restrict or modify the right entitlements and remedies conferred
upon any person or the liabilities imposed upon Orica Consumer Products by any condition or warranty implied by Commonwealth, State or
Territory Act or ordinance void or prohibiting such exclusion limitation or modification. Coating systems can be expected to perform as indicated on
the Duspec Spec Sheet so long as applications and application procedures of the individual products are followed as recommended on the
appropriate Product data Sheet. "Orica" "Dulux" "Berger" "Berger
Gold Label" "Hadrian" "Walpamur" "Levene" "Acratex" and Other marks followed by 庐 are registered trademarks of Orica Australia Pty Ltd ABN 99
004 117 828. Marks followed by the symbol 鈩? are trademarks.

Please note that this document is only valid for 60 days from the date of issue.

Orica Consumer Products 1970 Princes Highway Clayton, Victoria 3168 AU ABN 99 004 117 828




Data Sheet INTERGRAIN Floortec Gloss
DuSpec Data Code AUDW0759 Page No 3 of 3
Issue No 3.0 Date Issued 23/01/2006

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
alexlind_com_au---bostik_ultralevel_slmsds.asp N/A
alexlind_com_au---bostik_ultrasetmsds.asp N/A
alexlind_com_au---bostik_ultra_np_primermsds.asp N/A
alexlind_com_au---bostik_ultra__np__primerpds.asp N/A
alexlind_com_au---chinawoodoilpds.asp N/A
alexlind_com_au---d519estapolglosssatinandmattpds.asp N/A
alexlind_com_au---deckingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---deckingoilpds.asp N/A
alexlind_com_au---deckingstainpds.asp N/A
alexlind_com_au---dimension4pds.asp N/A
alexlind_com_au---duothane_partapds.asp N/A
alexlind_com_au---dwdpds.asp N/A
alexlind_com_au---endure2packmsds.asp 872-50-4 34590-94-8
alexlind_com_au---exterioroilpds.asp N/A
alexlind_com_au---finebuffingoilpds.asp N/A
alexlind_com_au---flatproofpds.asp N/A
alexlind_com_au---floorcleanpds.asp N/A
alexlind_com_au---floorclearglosspds.asp N/A
alexlind_com_au---floorproofglosspds.asp N/A
alexlind_com_au---floorproofthinnersmsds.asp 1330-20-7 108-65-6
alexlind_com_au---floorproofthinnerspds.asp N/A
alexlind_com_au---floorsealpds.asp N/A
alexlind_com_au---floortecglosspds.asp N/A
alexlind_com_au---fungishieldpds.asp N/A
alexlind_com_au---gardenfurnitureoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---hard_burnishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---highbuildenduremsds.asp 872-50-4 34590-94-8
alexlind_com_au---hispeedfinishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---limingsolutionpds.asp N/A
alexlind_com_au---mastertouchpolishmsds.asp N/A
alexlind_com_au---mastertouchpolishpds.asp N/A
alexlind_com_au---maxithanecleanupsolventpds.asp N/A
alexlind_com_au---maxithaneglossnypds.asp N/A
alexlind_com_au---maxithaneglosspds.asp N/A
alexlind_com_au---maxithanereducerpds.asp N/A
alexlind_com_au---maxithanesatinpds.asp N/A
alexlind_com_au---maxithanewetedgeextendermsds.asp 148462-57-1 148462-58-2 872-50-4
alexlind_com_au---modifiedoilsatinpds.asp N/A
alexlind_com_au---monothanehs50glosspds.asp N/A
alexlind_com_au---proofsealpds.asp N/A
alexlind_com_au---prooftinitpds.asp N/A
alexlind_com_au---quicksteppds.asp N/A
alexlind_com_au---renewmsds.asp N/A
alexlind_com_au---sandingsealerpds.asp N/A
alexlind_com_au---scandinavianoilpds.asp N/A
alexlind_com_au---seamasterpsd.asp N/A
alexlind_com_au---sparmarinepds.asp N/A
alexlind_com_au---squeakycleanmsds.asp N/A
alexlind_com_au---timberfillpds.asp N/A
alexlind_com_au---timbersealpds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC