Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

N/A

File Name: alexlind_com_au---modifiedoilsatinpds.asp
                                                                                                             Page 1 of 3




MODIFIED OIL SATIN

USES:
1. Ideal for coating NEW TIMBER FLOORS suspected of being prone to shrinkage. MODIFIED OIL will
greatly reduce the occurrence of EDGE BONDING.
2. For clients concerned about exposure to fumes from POLYURETHANES, MODIFIED OIL is less likely
to cause discomfort because only WHITE SPIRIT is used as the solvent.
3. MODIFIED OIL SATIN is not as subject to SHEEN VARIATION as LOW SHEEN
POLYURETHANES.
4. MODIFIED OIL SATIN is completely compatible with TUNGSEAL.


APPLICATION:
The timber surface should be fine sanded and free from dirt, wax or oily substances. FIRST COAT - can be
either:
(a) TIMBERSEAL - apply with a mohair roller. Allow 40 - 60 minutes to dry, no sanding is required, prior
to application of second coat.
(b) MODIFIED OIL - apply with a mohair roller or lambs wool pad. Allow overnight to dry. Lightly sand
with a worn 150 mesh screenback.
NOTE: If the coating does not sand to a powder, leave for another 24 hours. Some timber species exude oils
and antioxidants which severely retard curing.
SECOND COAT - Apply MODIFIED OIL with a mohair roller or lambs wool pad. Clean up with Mineral
Turpentine. Do not return unused material to the can.
Page 2 of 3



COVERAGE: 10-12m虏 per litre.


IMPORTANT NOTICE: MODIFIED OIL is prone to 'skinning', therefore if using partly used drum, it
may be necessary to strain the MODIFIED OIL through a stocking.


MAINTENANCE: MODIFIED OIL has wearing properties at least equivalent to all other oil based floor
coatings. However, in most situations a sacrificial wear surface, i.e. a polish is required to take the brunt of
the traffic. Suitable polishes are: Johnsons One Go, Reckitts Long Life, or Peerless Gemini. All these are
water based and easily applied with a foam applicator. Polish should be applied after allowing at least three
days for the MODIFIED OIL to cure, avoid heavy traffic during this period.


RECOATING: Before recoating, all residual polish must be completely removed. Refer to the polish
manufacturer's recommendations for the correct method of removal. The removal of wax polish is more
difficult than water based polishes and requires repeated washes with Mineral Turpentine, or in extreme
cases sanding back to bare timber.


SHELF LIFE: This product is best if used within 12 months from manufacture (refer to batch number),
when stored in unopened containers under normal conditions of temperature and humidity.


SHAKE WELL

SAFETY DIRECTIONS: Usage of this material must be under well ventilated conditions to minimise
inhalation of vapours. Wear respirator with filters that conform with AS1716. Asthmatics, the very young,
elderly people and pets should leave the site during the first 24 hours. Prevent skin contact by wearing
impervious gloves. Breathing of vapour is harmful and may cause lung irritation and allergic respiratory
reaction. Irritates skin and eyes. Keep tin firmly lidded, as this product cures when exposed to air. In case of
spillage, absorb into dry sand or dirt. Remove from work area and cover with water for 24 hours prior to
disposal.


WARNING FLAMMABLE: Contains 80gms per litre of Aromatic Hydrocarbons. This tin contains
volatile and flammable solvents and when using contents adequate ventilation to the outside must be
provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing electrical
Page 3 of 3



switches, etc.) must be eliminated in or near the working area. DO NOT SMOKE. Keep tin closed when not
in use.


FIRST AID: If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or
occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or
milk. CONTACT DOCTOR OR POISONS INFORMATION CENTRE Australia 131126. In case of eye
contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove
contaminated clothing and wash skin first with methylated spirits, then with soap and water.

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
alexlind_com_au---bostik_ultralevel_slmsds.asp N/A
alexlind_com_au---bostik_ultrasetmsds.asp N/A
alexlind_com_au---bostik_ultra_np_primermsds.asp N/A
alexlind_com_au---bostik_ultra__np__primerpds.asp N/A
alexlind_com_au---chinawoodoilpds.asp N/A
alexlind_com_au---d519estapolglosssatinandmattpds.asp N/A
alexlind_com_au---deckingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---deckingoilpds.asp N/A
alexlind_com_au---deckingstainpds.asp N/A
alexlind_com_au---dimension4pds.asp N/A
alexlind_com_au---duothane_partapds.asp N/A
alexlind_com_au---dwdpds.asp N/A
alexlind_com_au---endure2packmsds.asp 872-50-4 34590-94-8
alexlind_com_au---exterioroilpds.asp N/A
alexlind_com_au---finebuffingoilpds.asp N/A
alexlind_com_au---flatproofpds.asp N/A
alexlind_com_au---floorcleanpds.asp N/A
alexlind_com_au---floorclearglosspds.asp N/A
alexlind_com_au---floorproofglosspds.asp N/A
alexlind_com_au---floorproofthinnersmsds.asp 1330-20-7 108-65-6
alexlind_com_au---floorproofthinnerspds.asp N/A
alexlind_com_au---floorsealpds.asp N/A
alexlind_com_au---floortecglosspds.asp N/A
alexlind_com_au---fungishieldpds.asp N/A
alexlind_com_au---gardenfurnitureoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---hard_burnishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---highbuildenduremsds.asp 872-50-4 34590-94-8
alexlind_com_au---hispeedfinishingoilmsds.asp 138-86-3 5989-27-5
alexlind_com_au---limingsolutionpds.asp N/A
alexlind_com_au---mastertouchpolishmsds.asp N/A
alexlind_com_au---mastertouchpolishpds.asp N/A
alexlind_com_au---maxithanecleanupsolventpds.asp N/A
alexlind_com_au---maxithaneglossnypds.asp N/A
alexlind_com_au---maxithaneglosspds.asp N/A
alexlind_com_au---maxithanereducerpds.asp N/A
alexlind_com_au---maxithanesatinpds.asp N/A
alexlind_com_au---maxithanewetedgeextendermsds.asp 148462-57-1 148462-58-2 872-50-4
alexlind_com_au---modifiedoilsatinpds.asp N/A
alexlind_com_au---monothanehs50glosspds.asp N/A
alexlind_com_au---proofsealpds.asp N/A
alexlind_com_au---prooftinitpds.asp N/A
alexlind_com_au---quicksteppds.asp N/A
alexlind_com_au---renewmsds.asp N/A
alexlind_com_au---sandingsealerpds.asp N/A
alexlind_com_au---scandinavianoilpds.asp N/A
alexlind_com_au---seamasterpsd.asp N/A
alexlind_com_au---sparmarinepds.asp N/A
alexlind_com_au---squeakycleanmsds.asp N/A
alexlind_com_au---timberfillpds.asp N/A
alexlind_com_au---timbersealpds.asp N/A

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC