AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 1 of 9
Section 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME
AMMO-LOCK
STATEMENT OF HAZARDOUS NATURE
Not considered a hazardous substance according to OSHA 29
CFR 1910.1200.
SUPPLIER
Company: Aquarium Pharmaceuticals Incorporated Company: Aquarium Pharmaceuticals Incorporated
Address: Address:
PO Box 218 50 East Hamilton Street
Chalfont Chalfont
PA, 18914-0218 PA, 18914
USA USA
Telephone: +1 215 822 8181 Telephone: +1 215 822 8181
Emergency Tel: +1800 222 1222 (US Only)
PRODUCT USE
Used according to manufacturers directions. For product 45.
SYNONYMS
"Solution ID# 3337"
Section 2 - COMPOSITION / INFORMATION ON INGREDIENTS
NAME CAS RN %
alphatic amine salts, proprietary >17
sodium thiosulfate pentahydrate 10102-17-7 N/S
Section 3 - HAZARDS IDENTIFICATION
CANADIAN WHMIS SYMBOLS
None
EMERGENCY OVERVIEW
RISK
POTENTIAL HEALTH EFFECTS
ACUTE HEALTH EFFECTS
SWALLOWED
The material has NOT been classified as "harmful by ingestion". This is because
of the lack of corroborating animal or human evidence. The material may still be
damaging to the health of the individual, following ingestion, especially where
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 2 of 9
Section 3 - HAZARDS IDENTIFICATION
pre-existing organ (e.g. liver, kidney) damage is evident. Present definitions
of harmful or toxic substances are generally based on doses producing mortality
(death) rather than those producing morbidity (disease, ill-health).
Gastrointestinal tract discomfort may produce nausea and vomiting. In an
occupational setting however, unintentional ingestion is not thought to be cause
for concern.
EYE
Although the liquid is not thought to be an irritant, direct contact with the
eye may produce transient discomfort characterized by tearing or conjunctival
redness (as with windburn).
SKIN
The material is not thought to produce adverse health effects or skin irritation
following contact (as classified using animal models). Nevertheless, good
hygiene practice requires that exposure be kept to a minimum and that suitable
gloves be used in an occupational setting.
INHALED
The material is not thought to produce adverse health effects or irritation of
the respiratory tract (as classified using animal models). Nevertheless, good
hygiene practice requires that exposure be kept to a minimum and that suitable
control measures be used in an occupational setting.
CHRONIC HEALTH EFFECTS
Long-term exposure to the product is not thought to produce chronic effects
adverse to the health (as classified using animal models); nevertheless exposure
by all routes should be minimized as a matter of course.
Section 4 - FIRST AID MEASURES
SWALLOWED
- Immediately give a glass of water.
- First aid is not generally required. If in doubt, contact a Poisons
Information Center or a doctor.
EYE
If this product comes in contact with eyes:
- Wash out immediately with water.
- If irritation continues, seek medical attention.
- Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.
SKIN
If skin or hair contact occurs:
- Flush skin and hair with running water (and soap if available).
- Seek medical attention in event of irritation.
INHALED
- If fumes or combustion products are inhaled remove from contaminated area.
- Other measures are usually unnecessary.
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 3 of 9
Section 4 - FIRST AID MEASURES
NOTES TO PHYSICIAN
Treat symptomatically.
Section 5 - FIRE FIGHTING MEASURES
Flash Point (掳F): Not Applicable
Lower Explosive Limit (%): Not Applicable
Upper Explosive Limit (%): Not Applicable
Autoignition Temp (掳F): Not Applicable
EXTINGUISHING MEDIA
- There is no restriction on the type of extinguisher which may be used.
Use extinguishing media suitable for surrounding area.
FIRE FIGHTING
- Use water delivered as a fine spray to control fire and cool adjacent area.
- DO NOT approach containers suspected to be hot.
- Cool fire exposed containers with water spray from a protected location.
- If safe to do so, remove containers from path of fire.
- Equipment should be thoroughly decontaminated after use.
GENERAL FIRE HAZARDS/HAZARDOUS COMBUSTIBLE PRODUCTS
- Non combustible.
- Not considered to be a significant fire risk, however containers may burn.
Decomposition may produce toxic fumes of, carbon dioxide (CO2), nitrogen oxides
(NOx), sulfur oxides (SOx), other pyrolysis products typical of burning organic
material.
FIRE INCOMPATIBILITY
Avoid contamination with oxidizing agents i.e. nitrates, oxidizing acids,
chlorine bleaches, pool chlorine etc. as ignition may result.
PERSONAL PROTECTION
Glasses:
Chemical goggles.
Gloves:
When handling larger quantities:
General purpose rubber glove.
Respirator:
Section 6 - ACCIDENTAL RELEASE MEASURES
MINOR SPILLS
- Clean up all spills immediately.
- Avoid breathing vapors and contact with skin and eyes.
- Control personal contact by using protective equipment.
- Contain and absorb spill with sand, earth, inert material or vermiculite.
- Wipe up.
- Place in a suitable labeled container for waste disposal.
MAJOR SPILLS
- Clear area of personnel and move upwind.
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 4 of 9
Section 6 - ACCIDENTAL RELEASE MEASURES
- Alert Emergency Responders and tell them location and nature of hazard.
- Control personal contact by using protective equipment.
- Prevent spillage from entering drains, sewers or water courses.
- Recover product wherever possible.
- Put residues in labeled containers for disposal.
- If contamination of drains or waterways occurs, advise emergency services.
ACUTE EXPOSURE GUIDELINE LEVELS (AEGL) (in ppm)
AEGL 1: The airborne concentration of a substance above which it is predicted
that the general population, including susceptible individuals, could
experience notable discomfort, irritation, or certain asymptomatic nonsensory
effects. However, the effects are not disabling and are transient and
reversible upon cessation of exposure.
AEGL 2: The airborne concentration of a substance above which it is predicted
that the general population, including susceptible individuals, could
experience irreversible or other serious, long-lasting adverse health effects
or an impaired ability to escape.
AEGL 3: The airborne concentration of a substance above which it is predicted
that the general population, including susceptible individuals, could
experience life-threatening health effects or death.
EMERGENCY RESPONSE PLANNING GUIDELINES (ERPG)
The maximum airborne concentration below which it is believed that nearly all
individuals could be exposed for up to one hour WITHOUT experiencing or developing
life-threatening health effects is:
sodium thiosulfate pentahydrate 500 mg/m鲁
irreversible or other serious effects or symptoms which could
impair an individual's ability to take protective action is:
sodium thiosulfate pentahydrate 50 mg/m鲁
other than mild, transient adverse effects
without perceiving a clearly defined odour is:
sodium thiosulfate pentahydrate 30 mg/m鲁
The threshold concentration below which most people.
will experience no appreciable risk of health effects:
sodium thiosulfate pentahydrate 10 mg/m鲁
American Industrial Hygiene Association (AIHA)
Ingredients considered according exceed the following cutoffs
Very Toxic (T+) >= 0.1% Toxic (T) >= 3.0%
R50 >= 0.25% Corrosive (C) >= 5.0%
R51 >= 2.5%
else >= 10%
where percentage is percentage of ingredient found in the mixture
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 5 of 9
Section 7 - HANDLING AND STORAGE
PROCEDURE FOR HANDLING
- Limit all unnecessary personal contact.
- Wear protective clothing when risk of exposure occurs.
- Use in a well-ventilated area.
- When handling DO NOT eat, drink or smoke.
- Always wash hands with soap and water after handling.
- Avoid physical damage to containers.
- Use good occupational work practice.
- Observe manufacturer's storing and handling recommendations.
RECOMMENDED STORAGE METHODS
- Polyethylene or polypropylene container.
- Packing as recommended by manufacturer
- Check all containers are clearly labeled and free from leaks.
STORAGE REQUIREMENTS
- Store in original containers.
- Keep containers securely sealed.
- Store in a cool, dry, well-ventilated area.
- Store away from incompatible materials and foodstuff containers.
- Protect containers against physical damage and check regularly for leaks.
- Observe manufacturer's storing and handling recommendations.
Section 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE CONTROLS
No data available: Ammo-Lock as (CAS: 10102-17-7)
No data available: sodium thiosulfate pentahydrate as (CAS: 10102-17-7)
Not available. Refer to individual constituents.
INGREDIENT DATA
SODIUM THIOSULFATE PENTAHYDRATE:
Dusts not otherwise classified, as inspirable dust;
ES TWA: 10 mg/m鲁.
Particulate (insoluble or poorly soluble *) Not Otherwise Specified (P.N.O.C)
TLV TWA: 10 mg/m鲁 Inhalable particulate
TLV TWA: 3 mg/m鲁 Respirable particulate
OEL-Sweden, United Kingdom: 10 mg/m鲁 total dust, 5 mg/m鲁 respirable dust
These "dusts" have little adverse effect on the lungs and do not produce toxic
effects or organic disease. Although there is no dust which does not evoke some
cellular response at sufficiently high concentrations, the cellular response
caused by P.N.O.C.s has the following characteristics:
- the architecture of the air spaces remain intact,
- scar tissue (collagen) is not synthesised to any degree,
- tissue reaction is potentially reversible.
Extensive concentrations of P.N.O.C.s may:
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 6 of 9
Section 8 - Test EXPOSURE CONTROLS / PERSONAL PROTECTION
- seriously reduce visibility,
- cause unpleasant deposits in the eyes, ears and nasal passages,
- contribute to skin or mucous membrane injury by chemical or mechanical action,
per se, or by the rigorous skin cleansing procedures necessary for their
removal. [ACGIH]
This limit does not apply:
- to brief exposures to higher concentrations
- nor does it apply to those substances that may cause physiological impairment
at lower concentrations but for which a TLV has as yet to be determined.
This exposure standard applies to particles which
- are insoluble or poorly soluble* in water or, preferably, in aqueous lung
fluid (if data is available) and
- have a low toxicity (i.e.. are not cytotoxic, genotoxic, or otherwise
chemically reactive with lung tissue, and do not emit ionizing radiation, cause
immune sensitization, or cause toxic effects other than by inflammation or by a
mechanism of lung overload)
* Notice of intended change.
PERSONAL PROTECTION
EYE
- Safety glasses with side shields
- Chemical goggles.
- Contact lenses pose a special hazard; soft lenses may absorb irritants and all
lenses concentrate them.
HANDS/FEET
Wear general protective gloves, e.g.. light weight rubber gloves.
OTHER
No special equipment needed when handling small quantities.
OTHERWISE:
- Overalls.
- Barrier cream.
- Eyewash unit.
The local concentration of material, quantity and
conditions of use determine the type of personal
protective equipment required.
Use appropriate NIOSH-certified respirator based on informed professional
judgement. In conditions where no reasonable estimate of exposure can be
made, assume the exposure is in a concentration IDLH and use NIOSH-certified
full face pressure demand SCBA with a minimum service life of 30 minutes, or
a combination full facepiece pressure demand SAR with auxiliary self-contained
air supply. Respirators provided only for escape from IDLH atmospheres shall be
NIOSH-certified for escape from the atmosphere in which they will be used.
ENGINEERING CONTROLS
General exhaust is adequate under normal operating conditions. If risk of
overexposure exists, wear an approved respirator. Correct fit is essential to
obtain adequate protection. Provide adequate ventilation in warehouse or closed
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 7 of 9
Section 8 - Test EXPOSURE CONTROLS / PERSONAL PROTECTION
storage areas.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL PROPERTIES
Liquid.
Mixes with water.
Molecular Weight: Not Applicable Boiling Range (掳C): Not Available
Melting Range (掳C): Not Available Specific Gravity (water=1): 1.072
Solubility in water (g/L): Miscible pH (as supplied): 6.9-7.8
pH (1% solution): Not Available Vapor Pressure (kPa): Not Available
Volatile Component (%vol): Not Available Evaporation Rate: Not Available
Relative Vapor Density (air=1): Not Available Flash Point (掳C): Not Applicable
Lower Explosive Limit (%): Not Applicable Upper Explosive Limit (%): Not Applicable
Autoignition Temp (掳C): Not Applicable Decomposition Temp (掳C): Not Available
State: Liquid
APPEARANCE
Clear colorless liquid; mixes with water.
Section 10 - CHEMICAL STABILITY AND REACTIVITY INFORMATION
CONDITIONS CONTRIBUTING TO INSTABILITY
- Presence of incompatible materials.
- Product is considered stable.
- Hazardous polymerization will not occur.
STORAGE INCOMPATIBILITY
Avoid contamination of water, foodstuffs, feed or seed.
Avoid reaction with oxidizing agents.
Section 11 - TOXICOLOGICAL INFORMATION
Ammo-Lock
Not available. Refer to individual constituents.
unless otherwise specified data extracted from RTECS - Register of Toxic Effects
of Chemical Substances
SODIUM THIOSULFATE PENTAHYDRATE:
TOXICITY IRRITATION
Oral (human) TDLo: 300 mg/kg/7d Nil Reported
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 8 of 9
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Disposal Instructions
All waste must be handled in accordance with local, state and federal
regulations.
- Recycle wherever possible.
- Consult manufacturer for recycling options or consult Waste Management
Authority for disposal if no suitable treatment or disposal facility can be
identified.
- Dispose of by: Burial in a licensed land-fill or Incineration in a licensed
apparatus (after admixture with suitable combustible material)
- Decontaminate empty containers. Observe all label safeguards until containers
are cleaned and destroyed.
Section 14 - TRANSPORTATION INFORMATION
NOT REGULATED UNDER UN CODE FOR TRANSPORT OF DANGEROUS GOODS
:
Dangerous Goods Class: None Subrisk: None
UN Number: None Packing Group: None
Shipping Name:None
Section 15 - REGULATORY INFORMATION
RISK
None under normal operating conditions
US Federal Regulations
A. General Product Information
In addition to Federal and State regulation, local regulations may
apply. Check with your local regulatory authorities.
B. Component Information
This material contains one or more of the following chemicals required
to be identified under SARA Section 302 (40 CFR 455 Appendix A)
SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4): None
-------------------------------------------------------------------
Component TSCA
sodium thiosulfate pentahydrate Y
State Regulations
A. General Product Information
continued...
AMMO-LOCK
Chemwatch Material Safety Data Sheet
Issue Date: 9-Nov-2005 CHEMWATCH 4656-48
CD 2005/3 Page 9 of 9
Section 15 - REGULATORY INFORMATION
B. Component Information
The following components appear on one or more of the following state
hazardous substance lists.
Component CAS No CA FL MA MN NJ PA
sodium thiosulfate pentahydrate 10102-17-7 N N N N N N
Y=Yes this material appears on that state's hazardous substances list.
N=No this material does not appear on that state's hazardous substances list.
Other Regulations
A. Component Information
CANADA
The following component(s) are identified under the Canadian
Hazardous Products Act Ingredient Disclosure List:
All of this product's components are on the Canadian Domestic
.
REGULATIONS
sodium thiosulfate pentahydrate (CAS: 10102-17-7) is found on the following
regulatory lists
US Food Additive Database
Canadian Domestic Substances List (DSL)
US Toxic Substances Control Act (TSCA)
US DOE Temporary Emergency Exposure Limits (TEELs)
Canadian Ingredient Disclosure List (SOR/88-64)
Section 16 - OTHER INFORMATION
Reasonable care has been taken in the preparation of this information, but the
author makes no warranty of merchantability or any other warranty, expressed or
implied, with respect to this information. The author makes no representations
and assumes no liability for any direct, incidental or consequential damages
resulting from its use. For additional technical information please call our
toxicology department on +800 CHEMCALL.
Issue Date: 9-Nov-2005
Print Date: 10-Nov-2005
This document is copyright. Apart from any fair dealing for the purposes of
private study, research, review or criticism, as permitted under the Copyright
Act, no part may be reproduced by any process without written permission from
CHEMWATCH. TEL (+61 3) 9572 4700.
|