Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

108-87-2
142-82-5
141-78-6
82985-35-1
110-82-7
4420-74-0

File Name: sikaautomotive_com---ipd-msds-aktivator-pro.asp
                                       Material Safety Data Sheet
Sika Aktivator PRO

1. Product and company identification
Product name : Sika Aktivator PRO
Supplier : Sika Corporation, Industry
30800 Stephenson Highway
Madison Heights, MI 48071
www.sikaindustry.com
Telephone no. : (888) 832 - 7452
Fax no. : (248) 577 - 0810
In case of emergency : CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887
Manufacturer : Sika Schweiz AG
T端ffenwies 16
CH-8048 Z端rich
Schweiz
Telephone no. : +41 58 436 40 40
Validation date : 5. August 2008.
Print date : 5. August 2008.
Product type : Liquid.

2. Composition/information on ingredients
Name CAS number %
methylcyclohexane 108-87-2 15 - 40
heptane 142-82-5 10 - 30
ethyl acetate 141-78-6 10 - 30
bis(trimethoxysilylpropyl)amine 82985-35-1 3-7
cyclohexane 110-82-7 1-5
3-trimethoxysilylpropane-1-thiol 4420-74-0 0.5 - 1.5
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in
this section.

3. Hazards identification
OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Potential acute health effects
Inhalation : Severely irritating to the respiratory system. Exposure to decomposition products may
cause a health hazard. Serious effects may be delayed following exposure.
Ingestion : Very toxic if swallowed. Aspiration hazard if swallowed. Can enter lungs and cause
damage.
Skin : Severely irritating to the skin.
Eyes : Severely irritating to eyes. Risk of serious damage to eyes.
See toxicological information (section 11)




5. August 2008 US MSDS no. : 120412 1/8
Sika Aktivator PRO

4. First aid measures
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed.
The exposed person may need to be kept under medical surveillance for 48 hours.

5. Fire-fighting measures
Flammability of the product : Flammable liquid. In a fire or if heated, a pressure increase will occur and the container
may burst, with the risk of a subsequent explosion. Runoff to sewer may create fire or
explosion hazard.
Extinguishing media
Suitable : Use dry chemical, CO2, water spray (fog) or foam.
Not suitable : Do not use water jet.
Special exposure hazards : Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training. Move containers from fire area if this can be done without risk. Use water
spray to keep fire-exposed containers cool.
Hazardous combustion : Decomposition products may include the following materials:
carbon dioxide
products
carbon monoxide
nitrogen oxides
sulfur oxides
metal oxide/oxides
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
equipment for fire-fighters

6. Accidental release measures
Personal precautions : No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Shut off all ignition sources. No
flares, smoking or flames in hazard area. Do not breathe vapor or mist. Provide
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Put
on appropriate personal protective equipment (see section 8).
Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Large spill : Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via
a licensed waste disposal contractor. Contaminated absorbent material may pose the
same hazard as the spilled product. Note: see section 1 for emergency contact
information and section 13 for waste disposal.
Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble or absorb with an inert dry material and place in an appropriate waste
disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of
via a licensed waste disposal contractor.




5. August 2008 US MSDS no. : 120412 2/8
Sika Aktivator PRO

7. Handling and storage
Handling : Put on appropriate personal protective equipment (see section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.
Use only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Do not enter storage areas and confined spaces unless adequately
ventilated. Keep in the original container or an approved alternative made from a
compatible material, kept tightly closed when not in use. Store and use away from heat,
sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use non-sparking tools. Take
precautionary measures against electrostatic discharges. To avoid fire or explosion,
dissipate static electricity during transfer by grounding and bonding containers and
equipment before transferring material. Empty containers retain product residue and
can be hazardous. Do not reuse container.
Storage : Store in accordance with local regulations. Store in a segregated and approved area.
Store in original container protected from direct sunlight in a dry, cool and well-ventilated
area, away from incompatible materials (see section 10) and food and drink. Eliminate
all ignition sources. Separate from oxidizing materials. Keep container tightly closed
and sealed until ready for use. Containers that have been opened must be carefully
resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use
appropriate containment to avoid environmental contamination.

8. Exposure controls/personal protection
Product name Exposure limits
methylcyclohexane ACGIH TLV (United States, 1/2007).
TWA: 1610 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
NIOSH REL (United States, 12/2001).
TWA: 1600 mg/m続 10 hour(s).
TWA: 400 ppm 10 hour(s).
OSHA PEL (United States, 11/2006).
TWA: 2000 mg/m続 8 hour(s).
TWA: 500 ppm 8 hour(s).
OSHA PEL 1989 (United States, 3/1989).
TWA: 1600 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
heptane ACGIH TLV (United States, 1/2007).
STEL: 2050 mg/m続 15 minute(s).
STEL: 500 ppm 15 minute(s).
TWA: 1640 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
NIOSH REL (United States, 12/2001).
CEIL: 1800 mg/m続 15 minute(s).
CEIL: 440 ppm 15 minute(s).
TWA: 350 mg/m続 10 hour(s).
TWA: 85 ppm 10 hour(s).
OSHA PEL (United States, 11/2006).
TWA: 2000 mg/m続 8 hour(s).
TWA: 500 ppm 8 hour(s).
OSHA PEL 1989 (United States, 3/1989).
STEL: 2000 mg/m続 15 minute(s).
STEL: 500 ppm 15 minute(s).
TWA: 1600 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
ethyl acetate ACGIH TLV (United States, 1/2007). Notes: 1996 Adoption Refers to
Appendix A -- Carcinogens.

5. August 2008 US MSDS no. : 120412 3/8
Sika Aktivator PRO

8. Exposure controls/personal protection
TWA: 1440 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
NIOSH REL (United States, 12/2001).
TWA: 1400 mg/m続 10 hour(s).
TWA: 400 ppm 10 hour(s).
OSHA PEL (United States, 11/2006).
TWA: 1400 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
OSHA PEL 1989 (United States, 3/1989).
TWA: 1400 mg/m続 8 hour(s).
TWA: 400 ppm 8 hour(s).
cyclohexane ACGIH TLV (United States, 1/2007).
TWA: 100 ppm 8 hour(s).
NIOSH REL (United States, 12/2001).
TWA: 1050 mg/m続 10 hour(s).
TWA: 300 ppm 10 hour(s).
OSHA PEL (United States, 11/2006).
TWA: 1050 mg/m続 8 hour(s).
TWA: 300 ppm 8 hour(s).
OSHA PEL 1989 (United States, 3/1989).
TWA: 1050 mg/m続 8 hour(s).
TWA: 300 ppm 8 hour(s).




Engineering measures : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas, vapor
or dust concentrations below any lower explosive limits. Use explosion-proof ventilation
equipment.
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
Personal protection
Respiratory : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Hands : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Eyes : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Skin : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.



5. August 2008 US MSDS no. : 120412 4/8
Sika Aktivator PRO

9. Physical and chemical properties
Physical state : Liquid.
Flash point : Closed cup: -4属C (24.8属F)
Color : Colorless.
Odor : Characteristic.
Density : ~0.74 g/cm3 [20属C (68属F)]
Viscosity : Dynamic: 2 mPa揃s (2 cP)

10 . Stability and reactivity
Stability : The product is stable.
Conditions to avoid : Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld,
braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not
swallow.
Materials to avoid : Reactive or incompatible with the following materials:
oxidizing materials
Hazardous decomposition : Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
products
Hazardous polymerization : Under normal conditions of storage and use, hazardous polymerization will not occur.

11 . Toxicological information
Potential chronic health effects
Chronic effects : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/or
dermatitis.
Acute toxicity
Conclusion/Summary : Not available.
Carcinogenicity
Classification
Product/ingredient name ACGIH IARC EPA NIOSH NTP OSHA
ethyl acetate A4 - - - - -

12 . Ecological information
Environmental effects : No known significant effects or critical hazards.

13 . Disposal considerations
Waste disposal : The generation of waste should be avoided or minimized wherever possible. Empty
containers or liners may retain some product residues. This material and its container
must be disposed of in a safe way. Dispose of surplus and non-recyclable products via
a licensed waste disposal contractor. Disposal of this product, solutions and any by-
products should at all times comply with the requirements of environmental protection
and waste disposal legislation and any regional local authority requirements. Avoid
dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers.
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
for additional handling information and protection of employees.




5. August 2008 US MSDS no. : 120412 5/8
Sika Aktivator PRO

14 . Transport information
Regulatory UN number Proper shipping name Classes PG* Additional
information information
DOT Classification UN1866 Resin solution 3 II -

TDG Classification UN1866 Resin solution 3 II -


ADR/RID Class UN1866 Resin solution 3 II -

IMDG Class UN1866 Resin solution 3 II Emergency
schedules (EmS)
F-E, S-E
IATA-DGR Class UN1866 Resin solution 3 II -

PG* : Packing group

15 . Regulatory information
U.S. Federal regulations : TSCA 4(a) final test rules: heptane
TSCA 8(a) PAIR: heptane; methylcyclohexane
United States inventory (TSCA 8b): All components are listed or exempted.
TSCA 12(b) one-time export: heptane
SARA 302/304/311/312 extremely hazardous substances: No products were found.
SARA 302/304 emergency planning and notification: No products were found.
SARA 302/304/311/312 hazardous chemicals: heptane; methylcyclohexane;
cyclohexane; ethyl acetate
SARA 311/312 MSDS distribution - chemical inventory - hazard identification:
heptane: Fire hazard; methylcyclohexane: Fire hazard, Immediate (acute) health hazard;
cyclohexane: Fire hazard, Immediate (acute) health hazard, Delayed (chronic) health
hazard; ethyl acetate: Fire hazard, Immediate (acute) health hazard, Delayed (chronic)
health hazard
Clean Water Act (CWA) 311: cyclohexane
Clean Air Act (CAA) 112 accidental release prevention: No products were found.
Clean Air Act (CAA) 112 regulated flammable substances: No products were found.
Clean Air Act (CAA) 112 regulated toxic substances: No products were found.
SARA 313
Product name CAS number Concentration
Form R - Reporting : cyclohexane 110-82-7 1-5
requirements
SARA 313 notifications must not be detached from the MSDS and any copying and redistribution of the MSDS shall
include copying and redistribution of the notice attached to copies of the MSDS subsequently redistributed.
State regulations : Connecticut Carcinogen Reporting: None of the components are listed.
Connecticut Hazardous Material Survey: None of the components are listed.
Florida substances: None of the components are listed.
Illinois Chemical Safety Act: None of the components are listed.
Illinois Toxic Substances Disclosure to Employee Act: None of the components are
listed.
Louisiana Reporting: None of the components are listed.
Louisiana Spill: None of the components are listed.
Massachusetts Spill: None of the components are listed.
Massachusetts Substances: The following components are listed:
METHYLCYCLOHEXANE; HEPTANE (N-HEPTANE); CYCLOHEXANE; ETHYL
ACETATE
5. August 2008 US MSDS no. : 120412 6/8
Sika Aktivator PRO

15 . Regulatory information
Michigan Critical Material: None of the components are listed.
Minnesota Hazardous Substances: None of the components are listed.
New Jersey Hazardous Substances: The following components are listed:
METHYLCYCLOHEXANE; n-HEPTANE; CYCLOHEXANE; ETHYL ACETATE
New Jersey Spill: None of the components are listed.
New Jersey Toxic Catastrophe Prevention Act: None of the components are listed.
New York Acutely Hazardous Substances: The following components are listed:
Benzene, hexahydro-; Ethyl acetate
New York Toxic Chemical Release Reporting: None of the components are listed.
Pennsylvania RTK Hazardous Substances: The following components are listed:
CYCLOHEXANE, METHYL-; HEPTANE; CYCLOHEXANE; ACETIC ACID ETHYL
ESTER
Rhode Island Hazardous Substances: None of the components are listed.


United States inventory : All components are listed or exempted.
(TSCA 8b)

16 . Other information
Hazardous Material :
Information System (U.S.A.)
2
Health
4
Flammability
0
Physical hazards
D
Personal Protection
Equipment
Caution: HMIS速 ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS速 ratings are not required on MSDSs under 29 CFR
1910.1200, the preparer may choose to provide them. HMIS速 ratings are to be used with a fully implemented
HMIS速 program. HMIS速 is a registered mark of the National Paint & Coatings Association (NPCA). HMIS速
materials may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
Date of printing : 05.08.2008.
: 05.08.2008.
Date of issue
Date of previous issue : No previous validation.
Version :1
Indicates information that has changed from previously issued version.
Notice to reader
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.

SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.

5. August 2008 US MSDS no. : 120412 7/8
Sika Aktivator PRO

16 . Other information
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.




5. August 2008 US MSDS no. : 120412 8/8

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
savinproducts_com---x-terg_msds.asp 497-19-8 6834-45-9 25155-30-0
savinproducts_com---xtra_solv_msds.asp 04-07-0 8052-48-0 64-02-8 9016-45-9 111-76-2
schaefferoil_com---285.asp 64742-95-6 21564-17-0 6317-18-6
schaefferoil_com---301.asp 111-76-2 67-56-1 27859-58-1
schaefferoil_com---309.asp 79-01-6 127-18-4 124-38-9
semicro_org---new_cp_msds_sani.asp 7732-18-5 7782-42-5 1336-21-6
semicro_org---pen_msds_sani.asp 7440-22-4 108-88-3 110-19-0 123-86-4 64-17-5 110-43-0 141-78-6 67-63-0
semicro_org---se_a_msds_sani.asp 28064-14-4 7440-22-4
semicro_org---sp_18_msds.asp 64-17-5 7440-22-4
semicro_org---sp_36_msds.asp 64-17-5 7440-22-4
sikaautomotive_com---ipd-msds-aktivator-pro.asp 108-87-2 142-82-5 141-78-6 82985-35-1 110-82-7 4420-74-0
sikaautomotive_com---msds-cpd-sigunitl72af-us.asp 10043-01-3
sikaautomotive_com---msds-ipd-sikafast3141-us.asp 80-62-6 1330-20-7
sikaautomotive_com---msds-ipd-sikaflex201-us.asp 1330-20-7
sikaautomotive_com---msds-ipd-sikaprimer209-us.asp 1333-86-4 141-78-6 78-93-3
sikaautomotive_com---msds-ipd-sikasil-gp.asp 17689-77-9 64742-48-9 64742-46-7 4253-34-3
sikaautomotive_com---msds-sikalastomer-511.asp 64742-47-8
soapfreeprocyon_com---07msds_cu.asp N/A
soapfreeprocyon_com---07msds_mp.asp N/A
soapfreeprocyon_com---07msds_ss.asp N/A
soapfreeprocyon_com---07msds_tg.asp N/A
soapfreeprocyon_com---endrsmnt.asp N/A
soapfreeprocyon_com---marketing.asp N/A
soapfreeprocyon_com---msds_plus_powder.asp N/A
spectrumchemical_com---08410.asp 659-22-3
spectrumchemical_com---1970s.asp 7782-92-5
spectrumchemical_com---3140i.asp 95-13-6
spectrumchemical_com---3175t.asp 37451-68-6
spectrumchemical_com---3325g.asp 517-21-5
spectrumchemical_com---3410i.asp 542-69-8
spectrumchemical_com---4500m.asp 96-33-3
spectrumchemical_com---4765d.asp 75-54-7
spectrumchemical_com---5720c.asp 75-77-4
spectrumchemical_com---6470c.asp 10016-20-3
spectrumchemical_com---6640m.asp 96-14-0
spectrumchemical_com---6670b.asp 110-65-6
spectrumchemical_com---a101s.asp 7732-18-5 64-19-7
spectrumchemical_com---a3011.asp 34381-68-5
spectrumchemical_com---a3801.asp 89-54-3
spectrumchemical_com---a5530.asp 104-94-9
spectrumchemical_com---a5610.asp 90-44-8
spectrumchemical_com---a6170.asp 32266-60-7
spectrumchemical_com---ahafn.asp 14456-34-9 7732-18-5 7697-37-2
spectrumchemical_com---athul.asp 7440-30-4 7732-18-5 7697-37-2
spectrumchemical_com---b3010.asp 67-52-7
spectrumchemical_com---b3240.asp 8006-78-8
spectrumchemical_com---b327s.asp 7732-18-5 62625-30-3 1310-73-2
spectrumchemical_com---b3490.asp 10191-18-1
spectrumchemical_com---b4000.asp 106-95-6
spectrumchemical_com---b4031.asp 980-71-2

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC