Search   
MSDS 
:
 4-Bromo-3-thiophenesulfonyl chloride, 97%
CAS 
:
 111283-90-0
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 111283-90-0 |4-Bromo-3-thiophenesulfonyl chloride | 97% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Water-reactive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes. If water-reactive products are embedded in the skin, no
water should be applied. The embedded products should be covered
with a light oil.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Water
Reactive. Material will react with water and may release a flammable
and/or toxic gas.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Do NOT
get water inside containers. Contact professional fire-fighters
immediately.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not expose spill to water. Do not get water inside
containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Do not allow contact with water. Use only in a chemical fume
hood. Discard contaminated shoes. Keep from contact with moist air
and steam.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep away from water. Corrosives area. Store protected from moisture.
Store under an inert atmosphere.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or
utilizing this material should be equipped with an eyewash facility
and a safety shower. Use adequate ventilation to keep airborne
concentrations low.
Exposure Limits
CAS# 111283-90-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid or liquid
Color: green
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 44 - 46 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C4H2BrClO2S2
Molecular Weight: 261.54

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Combines vigorously or explosively with water. Low melting point
solid.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Water.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur,
carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 111283-90-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Bromo-3-thiophenesulfonyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S.*
Hazard Class: 8
UN Number: 3096
Packing Group: II
IMO
Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S.*
Hazard Class: 8
UN Number: 3096
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE SOLID, WATER-REACTIVE, N.O.S.*
Hazard Class: 8
UN Number: 3096
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 111283-90-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 111283-90-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 111283-90-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 6/10/2003 Revision #4 Date: 7/01/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
9-Chloro-5-methyl-5H-benzo[5,6]thiino[4,3-d]pyrimidin-2-amine, 97% 254429-65-7
1,4,5,6,7,7-Hexachloro-5-Norbornene-2,3-Dicarboxylic Anhydride, 96% 115-27-5
N1-(2-Thienylmethyl)-2-amino-5-chlorobenzamide, 97% 218158-01-1
4-Hydroxy-3,5-dimethylbenzaldehyde, TECH 2233-18-3
2-Amino-1-(4-bromophenyl)ethan-1-one hydrochloride, 97% 5467-72-1
2,4-Dinitroaniline, 99% 97-02-9
2-(1,3,4-Oxadiazol-2-yl)phenol, 97% 1008-65-7
2-Trimethylsilyl-1,3-dithiane, 97+% 13411-42-2
1-Methyl-3-(trifluoromethyl)-1H-pyrazole, 97% 154471-65-5
1-(4-Iodophenyl)-1H-pyrrole-2-carbaldehyde, TECH 261178-18-1
1-Ethyl 4-(2-oxo-1,2-diphenylethyl) succinate, 97% 499785-49-8
2-[(1-Methyl-1H-imidazol-2-yl)thio]ethan-1-ol, 97% 53064-92-9
4-Phenyl-1,2,3-thiadiazol-5-amine, 97% 78301-72-1
5-Methyl-2-(methylthio)[1,2,4]triazolo[1,5-a]pyrimidin-7-ol, 97% 40775-78-8
1,2,3-Thiadiazole-4-carboxamide, 97% 4100-20-3
3-(Methylthio)-4-oxo-4,5,6,7-tetrahydro-2- 499771-14-1
2,2,5,5-Tetramethyl-2,5-Dihydropyrazine- 1,4-Dioxide, 99+% 88571-73-7
2-Phenyleth-1-ene-1-sulfonamide, 97% 4363-41-1
Methyl 2-mercapto-1-methyl-1H-imidazole-5-carboxylate, 97% 68892-07-9
Ethyl 6-acetyl-3-aminothieno[2,3-b]pyridine-2-carboxylate, 97% 499771-18-5
3-(3-Nitrophenyl)-5-(2-thienyl)-1,2,4-oxadiazole, 97% 218144-79-7
Bibenzyl, 99% 103-29-7
2-Phenyl-1,2,4-triazaspiro[4.5]dec-3-ene-3-thiol, 97% 39263-81-5
2-Methyl-2-(1H-pyrrol-1-yl)propan-1-ol, TECH 499771-22-1
Ethylenebis(oxyethylenenitrilo)tetraacetic acid 67-42-5
Ethyl 1-(4-aminophenyl)-5-methyl-1H-pyrazole-4-carboxylate, 97% 260046-88-6
3-(tert-Butyl)-4,5-dihydro-1H-pyrazol-5-one, TECH 29211-68-5
Ethyl 1-(4-aminophenyl)-3,5-dimethyl-1H-pyrazole-4-carboxylate, 97% 257863-04-0
5-Benzhydryl-1H-pyrazole, 97% 143547-74-4
6-Quinoxalinamine, 97% 6298-37-9
(1-Methyl-5-phenyl-1H-pyrazol-4-yl)methanol, 97% 499785-47-6
3-Aminophenyl N,N-dimethylcarbamate, 97% 19962-04-0
4-Pyridin-2-ylisoxazol-5-amine, 97% 499785-46-5
N-(4-Amino-5-methoxy-2-methylphenyl)benzamide, 95+% 99-21-8
Ethyl Ether 60-29-7
5-Nitro-1-benzothiophene-2-carbonyl chloride, 97% 86010-32-4
4-Bromo-2,5-difluorobenzene-1-sulfonyl chloride, 95%+ 207974-14-9
2-(3,5-Difluorophenyl)ethanoyl chloride, 97% 157033-24-4
5-Chloro-1-methyl-3-(trifluoromethyl)-1H-pyrazole-4-carbonyl 128564-57-8
4-Bromo-3-thiophenesulfonyl chloride, 97% 111283-90-0
Quinoline-n-oxide hydrate 1613-37-2
5-Chloro-1,3-dimethyl-1H-pyrazole-4-sulfonic acid, 97% 499785-48-7
3-Chloro-4-methylthiophene-2-carboxylic acid, 97% 229342-86-3
5-Chloro-4-(chloromethyl)-1,2,3-thiadiazole, 97% 88127-85-9
N-(2,3-Dihydro-1,4-benzodioxin-2-ylmethyl)-N-isopropylamine, 97% 21398-64-1
1H-Pyrrole-2-carbohydrazide, 97% 50269-95-9
2-{4-[(5-Nitro-2-pyridyl)oxy]phenyl}acetonitrile, 97% 219928-36-6
2-Amino-4-ethyl-5-oxo-4H,5H-pyrano[3,2-c]chromene-3-carbonitrile, 97% 499785-45-4
2-Furaldehyde oxime, 97% 1121-47-7
5-[(3-Nitro-2-pyridyl)thio]-1,3,4-thiadiazol-2-amine, 97% 499771-19-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net