Search   
MSDS 
:
 2,3,5-Trimethylnaphthalene, 99%
CAS 
:
 2245-38-7
SYNONYMS 
:
 1,6,7-Trimethylnaphthalene; 2,3,5-Trimethylnaphthalene.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 2245-38-7 |2,3,5-Trimethylnaphthalene | 99 | 218-833-5 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin. Contact with the skin may cause photosensitivity.
Ingestion:
May cause irritation of the digestive tract. The toxicological
properties of this substance have not been fully investigated. May be
harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. May be harmful if
inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by
medical personnel. Never give anything by mouth to an unconscious
person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote:
None reported.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Use with adequate ventilation. Avoid contact with
eyes, skin, and clothing. Keep container tightly closed. Avoid
ingestion and inhalation.
Storage:
Keep container closed when not in use. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 2245-38-7:


Personal Protective Equipment

Eyes:
Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear to slightly cloudy, light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 285 deg C @ 762 mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.0088 g/ml @ 25C
Molecular Formula: C13H14
Molecular Weight: 170.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 2245-38-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,3,5-Trimethylnaphthalene -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 2245-38-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 2245-38-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 2245-38-7 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/29/1999 Revision #2 Date: 12/10/2002

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-(Phenylsulfonyl)-1H-indole-2-carbonyl chloride, 97% 342405-28-1
1-(Phenylsulfonyl)-1h-indole-2-carbaldehyde, 97% 80360-23-2
2-(Bromomethyl)-1-(phenylsulfonyl)-1h-indole, 97% 337508-54-0
[1-(Phenylsulfonyl)-1h-indol-2-yl]methanol, 95+% 73282-11-8
1-(Phenylsulfonyl)-1h-indol-2-ylboronic acid, 97% 342404-46-0
2-pyrazinecarboxylic acid
2-Pyrazinecarbonyl chloride, 97% 19847-10-0
N-Octyl-Dioxyethylene 19327-37-8
2-Pyrazinylmethanol, 97% 6705-33-5
2-Quinoxalinecarboxylic acid
2-Bromo-1-(2-quinoxalinyl)-1-ethanone, 97% 35970-57-1
2-Quinoxalinylboronic acid, 97% 499769-90-3
2-Quinoxalinylmethylamine, 97% 131052-78-3
Ethyl stearate, 99% 111-61-5
1-Methyl-1H-imidazole-4-carboxylic acid, 90+% 41716-18-1
1-Methyl-1H-imidazole-4-sulfonyl chloride, 95+% 137049-00-4
1-Methyl-1H-benzimidazole-2-carboxylic acid, 97% 20572-01-4
1-Methyl-1H-benzimidazole-2-carbonyl chloride, 97% 62366-47-6
2-(Bromomethyl)-1-methyl-1h-benzimidazole, 97% 136099-52-0
(1-Methyl-1H-benzimidazol-2-yl)methylamine, 97% 20028-40-4
2-Bromo-1-(2-pyridinyl)-1-ethanone hydrobromide, 97% 17570-98-8
Dulcitol, 99+% 608-66-2
2-Bromo-1-pyridin-3-ylethan-1-one hydrobromide, 97% 17694-68-7
3-Pyridyl isothiocyanate, 95+% 17452-27-6
2-Bromo-1-(4-pyridinyl)-1-ethanone hydrobromide, 97% 5349-17-7
4-Pyridylmethylamine, 95+% 3731-53-1
8-Quinolinecarbaldehyde, 97% 38707-70-9
8-(Bromomethyl)quinoline, 97% 7496-46-0
2-Quinolinecarbaldehyde, 97% 5470-96-2
2-Quinolinylmethanol, 97% 1780-17-2
6-Quinolinesulfonyl chloride, 90+% 65433-99-0
6-Bromoquinoline, 95+% 5332-25-2
Isoquinoline-3-carboxylic acid hydrate, 97% 203626-75-9
1-(Bromomethyl)isoquinoline hydrobromide, 97% 337508-56-2
1-Isoquinolinylmethanol, 97% 27311-63-3
2-Methyl-1,3-thiazole-4-carboxylic acid, 97% 35272-15-2
2,4-Dimethyl-1,3-thiazole-5-carboxylic acid, 97% 53137-27-2
2,4-Dimethyl-1,3-thiazole-5-sulfonyl chloride, 97% 80466-80-4
2,4-Dimethyl-1,3-thiazole-5-carbaldehyde, 97% 95453-54-6
(2,4-Dimethyl-1,3-thiazol-5-yl)methanol, 97% 50382-32-6
5-Bromo-2,4-dimethyl-1,3-thiazole, 90+% 28599-52-2
1,3-Benzothiazole-6-carboxylic acid, tech 3622-35-3
1,3-Benzothiazole-6-carbonyl chloride, 97% 55439-73-1
1,3-Benzothiazole-6-sulfonyl chloride, 90+% 181124-40-3
2,3,5-Trimethylnaphthalene, 99% 2245-38-7
Diphenylglyoxime 23873-81-6
6-(Bromomethyl)-1,3-benzothiazole, 97% 499770-85-3
1,3-Benzothiazol-6-ylmethanol, 97% 19989-66-3
6-Bromo-1,3-benzothiazole, 97% 53218-26-1
1,3-Benzothiazol-6-ylboronic acid, 97% 499769-91-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net