Search   
MSDS 
:
 Trifluoromethanesulfonic anhydride
CAS 
:
 358-23-6
SYNONYMS 
:
 Triflic anhydride
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 358-23-6 |Trifluoromethanesulfonic anhydride | | 206-616-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 14 35

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Reacts violently with water. Causes severe burns.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause irritation of the respiratory tract with burning pain in
the nose and throat, coughing, wheezing, shortness of breath and
pulmonary edema. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of
the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Not available.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4
cupfuls of milk or water. Get medical aid immediately. Wash mouth out
with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Reacts
violently with water.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Do not allow contact with water. Use only in a
chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Water free area. Store under nitrogen. Do not store in steel
container.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 358-23-6:


Personal Protective Equipment

Eyes:
Not available.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Clear liquid
Color: colourless - light brown
Odor: pungent odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 80 deg C @760mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.700
Molecular Formula: C2F6O5S2
Molecular Weight: 282.14

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water, heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, strong bases, alcohols, alkalies.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride
gas.
Hazardous Polymerization: Will not occur.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 358-23-6 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Trifluoromethanesulfonic anhydride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 35 Causes severe burns.
Safety Phrases:
S 8 Keep container dry.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 358-23-6: No information available.
Canada
CAS# 358-23-6 is listed on Canada's NDSL List.
CAS# 358-23-6 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 358-23-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 4/03/2003 Revision #0 Date: Original.

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Potassium Hexamethyldisilazide 40949-94-8
2-Methoxybenzyl chloride 7035-02-1
Pivaldehyde, 98% 630-19-3
Decahydronapthalene-D18, 99 atom% D 28788-42-3
4'-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)acetanilide 214360-60-8
3-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)benzoic acid 269409-73-6
3-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)aniline 210907-84-9
2-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)aniline 191171-55-8
2-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenol, 97% 269409-97-4
3-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenol 214360-76-6
DL-Terebic Acid, 98+% 79-91-4
4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenol, 97% 269409-70-3
Cobalt, certified powder, mesh 300 and finer 7440-48-4
2-Methoxy-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenol 269410-22-2
2,6-Dimethyl-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenol 269410-25-5
N-[4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]succinamic 480424-98-4
N-Nitrosodimethylamine, 99+% 62-75-9
4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine 181219-01-2
3-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine 329214-79-1
4-Acetamidophenylboronic acid 101251-09-6
3-Acetamidophenylboronic acid 78887-39-5
Chloroform-D, stabilized with silver foil, contains 0.03 v/v% TMS, 865-49-6
2-Chloro-6-fluorobenzonitrile, 98% 668-45-1
4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)benzoic acid 180516-87-4
Methyl 3-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate 00-01-1
Ethyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate 195062-62-5
4-(4,4,5,5-Tetramethyl-1,3,2-dioxaborolan-2-yl)benzonitrile 171364-82-2
3-Methyl-1-phenyl-2-pyrazolin-5-one 99% 89-25-8
Diethylphosphatoethyltriethoxysilane 757-44-8
2',4'-Dimethoxyacetophenone 829-20-9
Diethyl maleate, remainder max. 1.5% diethyl fumarate 141-05-9
Tri-tert-butylphosphine tetrafluoroborate 131274-22-1
Methyl 2-oxocyclohexanecarboxylate 41302-34-5
2-Iodobiphenyl 2113-51-1
Calcium thioglycolate trihydrate 814-71-1
(R)-(+)-1-(4-Bromophenyl)ethylamine hydrochloride 64265-77-6
Trifluoromethanesulfonic anhydride 358-23-6
4-Octylbenzaldehyde, 97% 49763-66-8
1,1,1-Trichloroethane, 90% 71-55-6
alpha-D-Lactose monohydrate, USP/NF, Ph.Eur., JP 5989-81-1
3-Heptyn-1-ol 14916-79-1
3-Octyn-1-ol 14916-80-4
3-Butyn-2-ol 2028-63-9
1-Chloro-2,4-dimethoxybenzene 7051-13-0
4-Amino-3,5-dichloropyridine 22889-78-7
O-(Trimethylsilyl)hydroxylamine 22737-36-6
4-Fluoro-DL-alpha-phenylglycine 7292-73-1
3-Carene 99-86-5
4-Bromo-3-methylphenol 14472-14-1
Ethyl 4-methyl-5-imidazolecarboxylate, 98% 51605-32-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net