Search   
MSDS 
:
 L-Anabasine, 90%
CAS 
:
 40774-73-0
SYNONYMS 
:
 Neonicotine2-(3-Pyridyl)piperidine
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 40774-73-0 |L-Anabasine | 90% | unlisted |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: T
Risk Phrases: 23/24/25

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Toxic by inhalation, in contact with skin and if
swallowed.Hygroscopic (absorbs moisture from the air).Light
sensitive.The toxicological properties of this material have not been
fully investigated.

Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and
corneal damage.
Skin:
May cause skin irritation. Toxic in contact with skin. May cause
cyanosis of the extremities.
Ingestion:
Poison by ingestion. May cause gastrointestinal irritation with
nausea, vomiting and diarrhea. The toxicological properties of this
substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties
of this substance have not been fully investigated. Toxic if inhaled.
Aspiration may lead to pulmonary edema. Inhalation at high
concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of
water for at least 15 minutes while removing contaminated clothing
and shoes.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical
aid immediately. Do NOT induce vomiting. If conscious and alert,
rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out
with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If breathing is difficult, give oxygen. Do NOT use
mouth-to-mouth resuscitation. If breathing has ceased apply
artificial respiration using oxygen and a suitable mechanical device
such as a bag and a mask.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Use water
spray to keep fire-exposed containers cool. Combustible liquid.
Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray,
dry chemical, carbon dioxide, or chemical foam. Use agent most
appropriate to extinguish fire.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Remove all
sources of ignition. Use a spark-proof tool. Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Do not breathe dust, vapor, mist, or
gas. Do not get in eyes, on skin, or on clothing. Empty containers
retain product residue, (liquid and/or vapor), and can be dangerous.
Keep container tightly closed. Keep away from heat, sparks and flame.
Avoid ingestion and inhalation. Store protected from light. Use only
in a chemical fume hood. Do not pressurize, cut, weld, braze,
solder, drill, grind, or expose empty containers to heat, sparks or
open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed
container. Store in a cool, dry, well-ventilated area away from
incompatible substances. Store protected from moisture. Store
protected from light.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 40774-73-0:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 270 deg C
Freezing/Melting Point: 9 deg C
Autoignition Temperature: Not available.
Flash Point: 93 deg C ( 199.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 300 deg C
Solubility in water: Soluble.
Specific Gravity/Density: 1.054
Molecular Formula: C10H14N2
Molecular Weight: 162.23

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Moisture sensitive. Light sensitive.
Conditions to Avoid:
Incompatible materials, light, ignition sources, excess heat,
exposure to moist air or water.
Incompatibilities with Other Materials:
Moisture, oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and
gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 40774-73-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
L-Anabasine -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALKALOIDS, LIQUID, N.O.S.
Hazard Class: 6.1
UN Number: 3140
Packing Group: II
IMO
Shipping Name: ALKALOIDS, LIQUID, N.O.S.
Hazard Class: 6.1
UN Number: 3140
Packing Group: II
RID/ADR
Shipping Name: ALKALOIDS, LIQUID, N.O.S.
Hazard Class: 6.1
UN Number: 3140
Packing group: II

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
Safety Phrases:
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 40774-73-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 40774-73-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 40774-73-0 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/31/2000 Revision #6 Date: 3/04/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Sudan Red 7B 6368-72-5
8-Methylnonanoic acid, 97% 5963-14-4
L-Anabasine, 90% 40774-73-0
Palmitic Anhydride 623-65-4
N-Ethylbenzylamine, 95% 14321-27-8
Poly(n-vinylcarbazole) 25067-59-8
Heptylbenzene 1078-71-3
Methyl 2-Hydroxyisobutyrate, 99% 2110-78-3
(+)-Pilocarpine Hydrochloride 54-71-7
3,4-Dimethoxybenzonitrile, 97% 2024-83-1
Cumene 98-82-8
1-Hexyne, 98% 693-02-7
4-Nitrocinnamaldehyde, 98% 1734-79-8
Dimethylhexylsilyl Chloride, 95% 0-01-1
1-Propanesulfonic acid sodium salt, 98% 14533-63-2
1-Nonanesulfonic acid sodium salt, 97% 35192-74-6
3-Methylquinoline, 99% 612-58-8
ETOH-D, 99 Atom% D 925-93-9
3-Methoxy-1,2-Propanediol, 98% 623-39-2
2-Amino-5-methylthio-1,3,4-thidiazole, 99% 5319-77-7
4-(4-Bromophenyl)Phenol, 99% 29558-77-8
5-Chloro-2-Nitrobenzaldehyde, Tech. 6628-86-0
DL-12-Hydroxystearic Acid, 99+% 36377-33-0
N-Hydroxyphthalimide, 98% 524-38-9
Ready-to-use concentrate i (for liquid scintillation counting)
4-Guanidinobenzoic Acid Hydrochloride, 95% 42823-46-1
Fumaramide, 98% 627-64-5
2-(1,3-Dioxolan-2-Yl)Ethyltriphenylphosphonium Bromide, 97% 86608-70-0
2,7-Diaminofluorene Dihydrochloride 13548-69-1
N-Hydroxymethyl-2-Chloroacetamide 2832-19-1
1,3-Dimethylcyclohexane, mixture of cis and trans, 97% 591-21-9
tert.-Butyl ethyl malonate 32864-38-3
Ethyl (R)-2-Hydroxy-4-Phenylbutyrate, 98% 90315-82-5
(+)-N-(2-Hydroxyethyl)-Alpha-Phenylethylamine, 99% 80548-31-8
1,4-Dimethylcyclohexane, mixture of cis and trans, 97% 589-90-2
BOC-Alpha-Methylalanine, 98% 30992-29-1
Sodium Dichloroacetate, 98% 2156-56-1
3,4-Dimethylbenzyl alcohol, 99% 6966-10-5
2,2,4,4,6,6,8,8-Octamethylcyclotetrasilazane, 95% 1020-84-4
Poly(Alpha-Methylstyrene), M.W. 11500 25014-31-7
1,8-Nonadiene, 99% 4900-30-5
N-(Tert-Butoxycarbonyl)-4-Piperidone, 95% 79099-07-3
Tetrachlorohydroquinone, 90% 87-87-6
1-Heptadecene, 97% 6765-39-5
3-[(4S)-2,2-dimethyl-1,3-dioxolan-4-yl]-propanol, 97% 51268-87-2
4'-Hydroxy-4-Biphenylcarboxylic Acid, 98% 58574-03-1
Acetophenone oxime 613-91-2
4'-Hydroxy-4-Biphenylcarbonitrile, 95% 19812-93-2
(S)-2,2-Dimethyl-1,3-Dioxolane-4-Acetamide 185996-33-2
N-Hydroxymethyl-3,4,5,6-Tetrahydrophthalimide, 98% 4887-42-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net