Search   
MSDS 
:
 1,10-Decanedicarboxylic acid, 99%
CAS 
:
 693-23-2
SYNONYMS 
:
 Dodecanedioic acid
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 693-23-2 |1,10-Decanedicarboxylic acid | 100 | 211-746-3 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: XI
Risk Phrases: 36/37/38

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological
properties of this material have not been fully investigated.

Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
The toxicological properties of this substance have not been fully
investigated. Causes gastrointestinal tract irritation.
Inhalation:
Causes respiratory tract irritation. The toxicological properties of
this substance have not been fully investigated.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Immediately flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid
immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15
minutes while removing contaminated clothing and shoes. Wash clothing
before reuse.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry
chemical, carbon dioxide, or appropriate foam.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective
Equipment section. Avoid generating dusty conditions. Provide
ventilation. Cover with dry earth, dry sand, or other non-combustible
material followed with plastic sheet to minimize spreading and
contact with water.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Wash thoroughly after handling. Remove contaminated clothing and
wash before reuse. Minimize dust generation and accumulation. Avoid
contact with eyes, skin, and clothing. Avoid ingestion and
inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container. Store in a cool, dry,
well-ventilated area away from incompatible substances.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 693-23-2:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Crystalline powder
Color: White Crystalline Powder
Odor: None reported.
pH: Not available.
Vapor Pressure: 0.001 mbar @ 20
Viscosity: 8.4 MPA 40.00 deg C
Boiling Point: 245 deg C
Freezing/Melting Point: 128.00 - 130.00 deg C
Autoignition Temperature: 390 deg C ( 734.00 deg F)
Flash Point: 230 deg C ( 446.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 230 deg C
Solubility in water: Slightly soluble.
Specific Gravity/Density:
Molecular Formula: C12H22O4
Molecular Weight: 230.30

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizing agents - reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 693-23-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1,10-Decanedicarboxylic acid -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 693-23-2: 0
Canada
CAS# 693-23-2 is listed on Canada's DSL List.
CAS# 693-23-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 693-23-2 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 10/24/1998 Revision #2 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
2-Pyridin-3-ylpiperidine, tech 13078-04-1
1,10-Decanedicarboxylic acid, 99% 693-23-2
1,4-Bis(chloromethyl)-2,5-dimethoxybenzene, tech 3752-97-4
2-Chloro-6-methylpyrimidine-4,5-diamine, 95+% 63211-98-3
2-(4-Phenyl-1,3-thiazol-2-yl)acetonitrile, 97% 41381-89-9
2,4,6-Trimethoxybenzonitrile, 98% 2571-54-2
6-Bromo-1-(chloromethyl)-2-methoxynaphthalene, 97% 92643-16-8
2,5-Dichloro-4-(5-hydroxy-3-methyl-1H-pyrazol-1-yl)benzenesulfonic 306935-68-2
Alpha-Cyclopropyl-4-Methoxybenzene Methanamine-Hydrochloride, 98% 0-00-1
1-Benzyl-4-Cyano-4-Hydroxypiperidine, 98% 6094-60-6
4-Hydroxy-6-methoxymethyl-2-(methylthio)pyrimidine, 97% 68087-13-8
Methyl 2-chloro-5-nitrobenzoate, 97% 6307-82-0
4-Iodophenyl isothiocyanate, 97% 2059-76-9
N'-Hydroxypyridine-3-carboximidamide, 97% 1594-58-7
4-Oxo-4-(4-toluidino)but-2-enoic acid, 97% 37904-03-3
4-(4-Chloroanilino)-4-oxobut-2-enoic acid, 97% 306935-74-0
4-(1-Naphthylamino)-4-oxobut-2-enoic acid, 97% 306935-75-1
4-(2,6-Dimethylanilino)-4-oxobut-2-enoic acid, 97% 198220-53-0
alpha-D-Glucoheptonic acid gamma lactone 99% 60046-25-5
3,4-Dimethylphenyl isothiocyanate, 97% 19241-17-9
4-(2,6-Diethylanilino)-4-oxobut-2-enoic acid, 97% 306935-77-3
1-(2,6-Diethylphenyl)-2,5-dihydro-1h-pyrrole-2,5-dione, 97% 38167-72-5
1-(3-Methoxyphenyl)-2,5-dihydro-1h-pyrrole-2,5-dione, 97% 3007-23-6
4-(4-Fluoroanilino)-4-oxobut-2-enoic acid, 97% 60252-79-1
3,4-Dimethoxyphenyl isothiocyanate, 97% 33904-04-0
2-(1-Naphthyl)ethanoyl chloride, 97% 5121-00-6
3-(Chloromethyl)benzamide, 97% 135654-16-9
Methyl 3-(3-bromo-4-hydroxy-5-methoxyphenyl)-2-cyanoacrylate, 97% 158532-02-6
4-Acetylbenzonitrile, 99% 1443-80-7
2-Morpholinophenol, 97% 41536-44-1
N-Benzyl-N-(2,2-diethoxyethyl)amine, 95+% 61190-10-1
N-(2,2-Diethoxyethyl)-N-(2-thienylmethyl)amine, 97% 113825-05-1
n-(4-Propylphenyl)thiourea, 97% 175205-18-2
Cyclopropylmethyl isothiocyanate, 97% 6068-90-2
Benzo[b]thiophen-3-ylmethanethiol, 97% 32259-23-7
2-(Styrylthio)acetic acid, 97% 13435-97-7
3-(Styrylthio)propanoic acid, 97% 175205-21-7
Ethyl 2-({[(2-ethoxy-2-oxoethyl)thio]methyl}thio)acetate, 97% 61713-23-3
1-Oxo-2,3-dihydro-1h-inden-4-yl benzoate, 95+% 59725-61-0
1,3-Dimethoxy-5-(2-nitroprop-1-enyl)benzene, 97% 18917-76-5
4-Chloromandelic acid, 98% (titr.) 492-86-4
4,7-Dichloroindoline-2,3-dione, 97% 18711-13-2
Spiro-(1,3-dioxolane-2,3'indolin)-2'-one, 97% 6714-68-7
Ethyl 2-[4-(trifluoromethoxy)anilino]acetate, 97% 306935-79-5
Ethyl 2-(4-iodoanilino)acetate, 97% 14108-76-0
n-(2-Methoxyphenethyl)urea, 97% 69226-62-6
2-Methoxybenzyl isothiocyanate, 95+% 17608-09-2
Niobium(v) oxide, 99.9% 1313-96-8
N1-(2,4-Dichlorophenyl)-2-hydroxyiminoacetamide, 95+% 18313-03-6
2,5-Dimethyl-2,3-dihydrofuran-3-one, 97% 14400-67-0

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net