Search   
MSDS 
:
 2-(Trifluoromethyl)benzenesulfonyl chloride, 98%
CAS 
:
 776-04-5
SYNONYMS 
:
 None Known.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 776-04-5 |2-(Trifluoromethyl)benzenesulfonyl chl| 98% | unlisted |
| |oride | | |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C
Risk Phrases: 34

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Chronic exposure may cause effects similar to those of acute
exposure.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Get medical aid immediately. Do NOT allow victim to rub eyes or keep
eyes closed. Extensive irrigation with water is required (at least 30
minutes).
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh
air immediately. If not breathing, give artificial respiration. If
breathing is difficult, give oxygen. Do NOT use mouth-to-mouth
resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. Do NOT get water inside
containers.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section. Provide
ventilation. Do not get water inside containers.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Do not ingest or
inhale. Do not allow contact with water. Use only in a chemical fume
hood. Discard contaminated shoes. Keep from contact with moist air
and steam. Use only with adequate ventilation.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Corrosives area. Store protected
from moisture. Store under nitrogen.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 776-04-5:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Liquid
Color: clear colorless to light yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 123 - 126 deg C @ 5 mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density: 1.585
Molecular Formula: C7H4ClF3O2S
Molecular Weight: 244.535

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Not currently available.
Conditions to Avoid:
Exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, carbon monoxide, oxides of sulfur, carbon dioxide,
hydrogen fluoride gas.
Hazardous Polymerization: Has not been reported

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 776-04-5 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-(Trifluoromethyl)benzenesulfonyl chloride -
Not listed by ACGIH, IARC, or NTP.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Ecotoxicity:
Fish: Pseudomonas putida:

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class:
UN Number: 3265
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 776-04-5: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 776-04-5 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 776-04-5 is not listed on the TSCA inventory.
It is for research and development use only.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/16/2002 Revision #2 Date: 6/26/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-Butyl-2,3-Dimethylimidazolium Tetrafluoroborate 0-01-1
1-Hexyl-2,3-dimethylimidazolium tetrafluoroborate 0-01-1
1-Butyl-3-Methylimidazolium Trifluoromethansulfonate 174899-66-2
1-Butyl-3-Methylimidazolium (L)-Lactate 0-01-1
3,4-Methylenedioxyphenylacetone 4676-39-5
2-Bromo-3-methylpyridine 3430-17-9
4-Chloro-2-Fluorobenzaldehyde 61072-56-8
2-Chlorobenzenesulfonyl chloride 2905-23-9
3-Chlorobenzenesulfonyl chloride 2888-06-4
Calcium Carbide 75-20-7
4-Ethoxyphenylacetic acid, 98% 4919-33-9
3-Chloro-2-methylbenzenesulfonyl chloride 80563-86-6
2,3-Dichlorobenzenesulfonyl chloride 82417-45-6
2,4-Dichlorobenzenesulfonyl chloride 16271-33-3
3,4-Dichlorobenzenesulfonyl chloride 98-31-7
3,5-Dichlorobenzenesulfonyl chloride 705-21-5
2,4-Dichloro-5-methylbenzenesulfonyl chloride 28286-86-4
2-Chloro-4-fluorobenzenesulfonyl chloride, 98% 85958-57-2
3-Chloro-4-fluorobenzenesulfonyl chloride 91170-93-3
Calcium carbonate 471-34-1
3-Fluorobenzenesulfonyl chloride 701-27-9
5-Fluoro-2-methylbenzenesulfonyl chloride, 97% 445-05-6
2,4-Difluorobenzenesulfonyl chloride 13918-92-8
2,6-Difluorobenzenesulfonyl chloride 60230-36-6
2,2'-Dibromobiphenyl 13029-09-9
5-Bromonicotinamide 28733-43-9
2-(Trifluoromethyl)benzenesulfonyl chloride, 98% 776-04-5
2-Chloro-5-(trifluoromethyl)benzenesulfonyl chloride 54090-08-3
Methyl 5-chloro-2-nitrobenzoate 51282-49-6
3-Bromobenzenesulfonyl chloride 2905-24-0
5-Chloro-4-methyl-2-nitroaniline 7149-80-6
N-4-Nitrobenzyl-n-propylamine hydrochloride 62869-74-3
2,5-Dibromo-3,6-difluorobenzenesulfonyl chloride 207853-66-5
Methyl 2-Chloro-4-Nitrobenzoate, 98% 13324-11-3
2,3,5,6-Tetramethylbenzenesulfonyl chloride 60706-63-0
Ethyl 4-chloro-3-nitrobenzoate 16588-16-2
2,5-Dimethoxybenzenesulfonyl chloride 1483-28-9
Methyl 3-Methylaminocrotonate 13412-12-9
3,4-Dimethoxybenzenesulfonyl chloride 23095-31-0
Calcium Chloride 10043-52-4
Calcium Chloride Dihydrate 10035-04-8
Methyl 5-bromo-2-furoate 2527-99-3
5-Chloro-2-methoxybenzenesulfonyl chloride 22952-32-5
Dimethyl 5-hydroxyisophthalate 13036-02-7
5-Bromo-2-methoxybenzenesulfonyl chloride 23095-05-8
2-Iodo-4-nitrotoluene 7745-92-8
2,6-Dichloro-omega-nitrostyrene 22482-43-5
Ethyl 5-bromonicotinate 20986-40-7
m-Methoxybenzylamine, 98% 5071-96-5
Methyl 5-bromonicotinate 29681-44-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net