Search   
MSDS 
:
 4-tert-Amylphenol, 99%
CAS 
:
 80-46-6
SYNONYMS 
:
 p-tert-Amylphenol; 2-Methyl-2-p-hydroxyphenylbutane;     4-tert-Amylphenol; p-(1,1-Dimethylpropyl)phenol; p-t-Pentylphenol;     Pentaphen.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 80-46-6 |4-tert-Amylphenol | 99 | 201-280-9 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: C N
Risk Phrases: 21/22 34 51/53

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
Harmful in contact with skin and if swallowed. Causes burns. Toxic
to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.Corrosive.Dangerous for the environment.

Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. May be harmful if absorbed through the skin.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes
gastrointestinal tract burns. May be harmful if swallowed.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
In case of contact, immediately flush eyes with plenty of water for
at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water for
at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do NOT induce vomiting. Get medical aid immediately.
If victim is fully conscious, give a cupful of water. Never give
anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial
respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam. Water
spray may cause frothing.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal
container. Avoid runoff into storm sewers and ditches which lead to
waterways. Clean up spills immediately, observing precautions in the
Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Minimize dust generation and accumulation. Do not get in eyes, on
skin, or on clothing. Keep container tightly closed. Discard
contaminated shoes. Do not breathe dust. Use only with adequate
ventilation.
Storage:
Keep container closed when not in use. Store in a cool, dry,
well-ventilated area away from incompatible substances. Corrosives
area.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 80-46-6:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
A respiratory protection program that meets OSHA's 29
CFR 1910.134 and ANSI Z88.2 requirements or European
Standard EN 149 must be followed whenever workplace
conditions warrant respirator use.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Flakes
Color: white
Odor: slight phenolic odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 255 deg C @ 760 mm Hg
Freezing/Melting Point: > 91 deg C
Autoignition Temperature: > 360 deg C (> 680.00 deg F)
Flash Point: 111 deg C ( 231.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 37 mg/l @ 20C practically insoluble
Specific Gravity/Density: 0.962 @ 20C/4C
Molecular Formula: C11H16O
Molecular Weight: 164.25

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, acid anhydrides, acid chlorides.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon
dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 80-46-6: SM6825000
LD50/LC50:
CAS# 80-46-6: Draize test, rabbit, eye: 1% Severe; Draize test,
rabbit, eye: 500 mg Severe; Oral, rat: LD50 = 1830 mg/kg; Skin,
rabbit: LD50 = 2000 mg/kg.
Carcinogenicity:
4-tert-Amylphenol -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****

Other
No information available.

**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Shipping Name: ALKYLPHENOLS, SOLID, N.O.S.
Hazard Class: 8
UN Number: 2430
Packing Group: III
IMO
Shipping Name: ALKYLPHENOLS, SOLID, N.O.S.
Hazard Class: 8
UN Number: 2430
Packing Group: III
RID/ADR
Shipping Name: ALKYLPHENOLS, SOLID, N.O.S.
Hazard Class: 8
UN Number: 2430
Packing group: III

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C N
Risk Phrases:
R 21/22 Harmful in contact with skin and if
swallowed.
R 34 Causes burns.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 80-46-6: No information available.
Canada
CAS# 80-46-6 is listed on Canada's DSL List.
CAS# 80-46-6 is listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 80-46-6 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 1/06/1999 Revision #3 Date: 10/05/2004

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
Isopropyl 2-(4-chlorophenoxy)-2-methylpropanoate, 97% 64416-88-2
3-Morpholino-4-tetrahydro-1h-pyrrol-1-ylcyclobut-3-ene-1,2-dione, 97% 282093-48-5
4-Hydroxy-2,6-dimethylbenzonitrile, 97% 58537-99-8
4-Iodo-2,6-dimethylphenol, 97% 10570-67-9
2,7-Dinitrofluorene, 97% 5405-53-8
4-Bromo-2-methylbenzene-1-sulfonyl chloride, 97% 139937-37-4
5-Chloro-6-methyl-2,1,3-benzothiadiazole, 97% 50636-02-7
Ethyl 4-(trifluoromethyl)benzoate, 97% 583-02-8
Ethyl 3,4-difluorobenzoate, 97% 144267-96-9
2-(4-Chlorophenyl)-1h-indole, 97% 1211-35-4
5,8-Dihydroxy-1,4-naphthoquinone, 98% 475-38-7
2-Nitronaphthalene-bis(hexachlorocyclo pentadiene) adduct, tech.
2-(2-Naphthyl)-1h-indole-3-carbaldehyde, 97% 94210-62-5
6-(4-Chlorophenyl)-1,3,5-triazine-2,4-diamine, 97% 4514-53-8
2-[4-(Trifluoromethoxy)phenoxy]acetic acid, 97% 72220-50-9
2-[4-(Trifluoromethoxy)phenoxy]propanoic acid, 97% 175204-35-0
2-[4-(Trifluoromethoxy)phenoxy]ethanohydrazide, 97% 175204-36-1
4-tert-Amylphenol, 99% 80-46-6
N-(Bromomethyl)Phthalimide 5332-26-3
4-Amino-2-(trifluoromethyl)benzonitrile, 95+% 654-70-6
N1-[4-bromo-3-(trifluoromethyl)phenyl]acetamide, 97% 41513-05-7
6-Chloro-2H-chromene-3-carboxylic acid 83823-06-7
6-Chloro-2H-chromene-3-carbonyl chloride, 95+% 306935-54-6
4,5-Dichloro-6-methyl-2-(2-pyridyl)pyrimidine, 97% 306935-55-7
2-Hydroxy-6-(2-thienyl)-4-(trifluoromethyl)nicotinonitrile, 97% 3335-45-3
2,6-Dichloro-4-methylnicotinonitrile, 97% 875-35-4
2,6-Dichloropyridine-4-carbonyl chloride, 97% 42521-08-4
2-Bromo-5-methoxybenzene-1-carbonyl chloride, 97% 56658-04-9
2,6-Dichloro-4-pyridyl isocyanate 159178-03-7
Silver Cyanide, 99% 506-64-9
[3-(2,6-Dichlorophenyl)-5-methylisoxazol-4-yl]methanol, 97% 175204-38-3
3-[4-(tert-Butyl)phenyl]-5-(chloromethyl)-1,2,4-oxadiazole, tech 175204-40-7
3-(2-Chloro-6-fluorophenyl)-5-methylisoxazole-4-carboxamide, 97% 4415-11-6
Ethyl 3-cyano-2-mercapto-6-Ethyl 3-cyano-2-mercapto-6-, 97% 56891-69-1
3-(2-Chloro-6-fluorophenyl)-5-methylisoxazole-4-carbonitrile, 97% 175204-41-8
3-(2,6-Dichlorophenyl)-5-methylisoxazole-4-carbothioamide, 97% 175204-43-0
4-tert-Butylthiobenzamide 57774-77-3
2,5-Dichloro-4,6-dimethylnicotinonitrile, 95+% 91591-63-8
Ethyl 2-chloro-3-cyano-6-methyl-5-nitroisonicotinate, tech 72701-63-4
Ethyl 2-chloro-3-cyano-6-methylisonicotinate, 97% 40108-12-1
Thiophene-2-carboximidamide hydrochloride, 95+% 54610-70-7
Pyridine-2-carboximidamide hydrochloride, 97% 51285-26-8
2,2-Dimethoxy-2-Phenylacetophenone, 99% 24650-42-8
1-(2,4-Difluorophenyl)hydrazine, 95+% 40594-30-7
4-(Bromomethyl)-2,6-dichloropyridine, tech 175204-45-2
3,5-Dichloropyridin-4-amine, 97% 22889-78-7
1-(3-Chloro-4-fluorophenyl)hydrazine, tech 84282-78-0
3-Bromo-4h-chromen-4-one, 97% 49619-82-1
5-Chloro-N,2-dihydroxybenzamide, 97% 37551-43-2
Benzo[d]isoxazol-3-ol, 95+% 21725-69-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net