Search   
MSDS 
:
 Coconut Oil
CAS 
:
 8001-31-8
SYNONYMS 
:
 Copra.
**** SECTION 2 - COMPOSITION, INFORMATION ON INGREDIENTS ****

+----------------+--------------------------------------+----------+-----------+
| CAS# | Chemical Name | % | EINECS# |
|----------------|--------------------------------------|----------|-----------|
| 8001-31-8 |Coconut Oil | 100 | 232-282-8 |
+----------------+--------------------------------------+----------+-----------+
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

**** SECTION 3 - HAZARDS IDENTIFICATION ****

EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully
investigated.

Potential Health Effects
Eye:
May cause mild eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the
skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if
swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
No information found.

**** SECTION 4 - FIRST AID MEASURES ****

Eyes:
Flush eyes with plenty of water for at least 15 minutes,
occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while
removing contaminated clothing and shoes. Get medical aid if
irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical
aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not
breathing, give artificial respiration. If breathing is difficult,
give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

**** SECTION 5 - FIRE FIGHTING MEASURES ****

General Information:
As in any fire, wear a self-contained breathing apparatus in
pressure-demand, MSHA/NIOSH (approved or equivalent), and full
protective gear. During a fire, irritating and highly toxic gases
may be generated by thermal decomposition or combustion. Will burn
if involved in a fire. Combustible at elevated temperatures.
Extinguishing Media:
Water or foam may cause frothing. Cool containers with flooding
quantities of water until well after fire is out. For large fires,
use dry sand, dry chemical, soda ash or lime or withdraw from area
and let fire burn. For small fires, use dry chemical, soda ash, lime
or dry sand.

**** SECTION 6 - ACCIDENTAL RELEASE MEASURES ****

General Information: Use proper personal protective equipment as indicated
in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth),
then place in suitable container. Avoid runoff into storm sewers and
ditches which lead to waterways. Clean up spills immediately,
observing precautions in the Protective Equipment section.

**** SECTION 7 - HANDLING and STORAGE ****

Handling:
Use with adequate ventilation. Avoid contact with skin and eyes.
Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place.

**** SECTION 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION ****

Engineering Controls:
Facilities storing or utilizing this material should be equipped
with an eyewash facility and a safety shower. Use adequate
ventilation to keep airborne concentrations low.
Exposure Limits
CAS# 8001-31-8:


Personal Protective Equipment

Eyes:
Wear appropriate protective eyeglasses or chemical
safety goggles as described by OSHA's eye and face
protection regulations in 29 CFR 1910.133 or European
Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin
exposure.
Clothing:
Wear appropriate protective clothing to prevent skin
exposure.
Respirators:
Follow the OSHA respirator regulations found in 29
CFR 1910.134 or European Standard EN 149. Use a
NIOSH/MSHA or European Standard EN 149 approved
respirator if exposure limits are exceeded or if
irritation or other symptoms are experienced.

**** SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES ****

Physical State: Solid/Liquid Mixture
Color: white, or pale yellow-orange
Odor: characteristic odor - weak odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: > 450 deg F
Freezing/Melting Point: 68-77F
Autoignition Temperature: Not applicable.
Flash Point: 420 deg F ( 215.56 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water
Specific Gravity/Density: 0.9115
Molecular Formula: C12-15 fatty acid
Molecular Weight: 0

**** SECTION 10 - STABILITY AND REACTIVITY ****

Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
High temperatures, excess heat.
Incompatibilities with Other Materials:
Oxidizing agents, acids, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

**** SECTION 11 - TOXICOLOGICAL INFORMATION ****

RTECS#:
CAS# 8001-31-8: GG6040000
LD50/LC50:
Not available.
Carcinogenicity:
Coconut Oil -
Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

**** SECTION 12 - ECOLOGICAL INFORMATION ****



**** SECTION 13 - DISPOSAL CONSIDERATIONS ****

Dispose of in a manner consistent with federal, state, and local regulations.

**** SECTION 14 - TRANSPORT INFORMATION ****

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

**** SECTION 15 - REGULATORY INFORMATION ****

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 8001-31-8: No information available.
Canada
CAS# 8001-31-8 is listed on Canada's DSL List.
CAS# 8001-31-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 8001-31-8 is listed on the TSCA inventory.

**** SECTION 16 - ADDITIONAL INFORMATION ****

MSDS Creation Date: 9/02/1997 Revision #3 Date: 3/18/2003

The information above is believed to be accurate and represents the best
information currently available to us. However, we make no warranty of
merchantability or any other warranty, express or implied, with respect to
such information, and we assume no liability resulting from its use. Users
should make their own investigations to determine the suitability of the
information for their particular purposes. In no way shall the company be
liable for any claims, losses, or damages of any third party or for lost
profits or any special, indirect, incidental, consequential or exemplary
damages, howsoever arising, even if the company has been advised of
the possibility of such damages.
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Search More   
ALL MSDS PAGES IN THIS GROUP
NAMECAS
1-(3,5-Difluoro-2-hydroxyphenyl)ethan-1-one, 97% 140675-42-9
Coconut Oil 8001-31-8
2-Bromo-4,6-di-tert-butylphenol, 97% 20834-61-1
benzo[b]thiophene-2-carbohydrazide 175135-07-6
2-(2-Methoxyphenoxy)-5-(trifluoromethyl)aniline, 95+% 175135-08-7
Ethyl 4-amino-2-mercaptopyrimidine-5-carboxylate, 97% 774-07-2
2-Amino-3,5-dibromo-6-chlorobenzoic acid, 97% 143769-25-9
N1-(4-propylphenyl)acetamide, 97% 20330-99-8
2,6-Dibromo-4-cyclohexylaniline, 97% 175135-11-2
methyl 2-nitrobenzoate
Methyl 3-hydroxybenzo[b]thiophene-2-carboxylate, 97% 13134-76-4
4-Bromo-6-(trifluoromethyl)-1H-benzo[d]imidazole, 97% 175135-14-5
4-Chlorobenzenesulfonyl Chloride, 97% 98-60-2
Tripropionin 139-45-7
1-(4-Chloro-3-methylphenoxy)-2-nitro-4-(trifluoromethyl)benzene, 97% 1799-97-9
3,5-Dichlorobenzene-1-sulfonamide, 95+% 19797-32-1
3-[5-(Trifluoromethyl)-1h-benzo[d]imidazol-2-yl]propan-1-ol, 97% 175135-15-6
DL-3-Fluorophenylalanine, 98+% 2629-54-1
3-(5-Chloro-1h-benzo[d]imidazol-2-yl)propan-1-ol, 95+% 10252-89-8
4-Bromo-5-methylisoxazol-3-amine, 97% 5819-40-9
4-Chloro-6-(trifluoromethyl)-1H-benzo[d]imidazole-2-thiol, 97% 175135-18-9
Collodion 60-29-7
4-(4-Nitrophenyl)morpholine, 97% 10389-51-2
4-Piperidinoaniline, 97% 2359-60-6
3-Chloro-6-hydrazinopyridazine, 95+% 17284-97-8
6-Chloropyridazin-3-amine, 97% 5469-69-2
5-(2,6-Dimethylmorpholino)-2-nitrophenol, 97% 175135-20-3
2-Methyl-6-nitroquinoline, 97% 613-30-9
5-Bromo-2-ethoxybenzaldehyde, 97% 79636-94-5
8-Chloronaphthalene-1-sulfonic acid, 97% 145-74-4
2-(Propylthio)nicotinic acid, 97% 175135-22-5
Copper, powder or dust 7440-50-8
2-(Pentylthio)nicotinic acid, 97% 175135-23-6
2-(Propylthio)pyridine-3-carbonyl chloride, 97% 175135-24-7
2-(Ethylthio)nicotinic acid,97% 27868-76-4
2-(Ethylthio)nicotinamide, 97% 175135-27-0
2-(Methylthio)nicotinamide, 97% 175135-28-1
2-Acrylamido-2-methylpropanesulfonic acid, 97% (Titr.) 15214-89-8
2-Bromo-1-(3,4-difluorophenyl)ethan-1-one, 95+% 40706-98-7
3-chlorobenzene-1-sulfonyl chloride 04-06-88
N1-(2-methyl-4-nitrophenyl)acetamide, 97% 2719-15-5
2-(Phenylthio)nicotinonitrile, 97% 35620-68-9
l-(-)-alpha-Methylbenzylamine, 99+%, (99% e.e.) 2627-86-3
N1-(4-Amino-2-methylphenyl)acetamide, tech 56891-59-9
2,4-Dibromo-6-fluoroaniline, 97% 141474-37-5
4-Hydrazinobenzene-1-sulfonamide hydrochloride, 97% 17852-52-7
5-Bromo-3,4-dimethylbenzene-1,2-diamine, 90+% 107100-16-3
Methyl 4-chloro-3-nitrobenzoate, 97% 14719-83-6
n-(4-Methoxyphenyl)thiourea, 97% 2293-07-4
3-Chloro-6-methylpyridazine, %97% 1121-79-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net