3M GENERAL OFFICES -- 62-3693-9530-6, SCOTCH-WELD 460 (PART A) OFF-
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CCWQS
MSDS NAME: 62-3693-9530-6, SCOTCH-WELD 460 (PART A) OFF-(SUPDAT)
Kit Part: Y
Responsible Party
Name: 3M GENERAL OFFICES
Address: 3M CENTER
City: ST PAUL MN 55144-1000
Info Phone: 612-733-1110
Emergency Phone Number: 612-733-1110
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: MINNESOTA MINING AND MFG CO, DBA 3M
Address: 3M CENTER BLDG 224-5S-04
City: SAINT PAUL MN 55144-1000
Phone: 866-556 5712 / 612-733-1110
Name: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Address: 3M CTR
City: SAINT PAUL MN 55144-1000
Phone: 612-737-4114
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONT:CHEM RELATED BURNS (CHEM CORROSIVITY):
SIGNS/SYMPS CAN INCL CLOUDY APPEAR OF CORNEA, CHEM BURNS, PAIN, TEARING,
ULCERS, IMPAIRED VISION/LOSS OF VISION. VAPS FROM HEATED MATL MAY CAUSE
IRRIT. DUST CREATED BY CUTTING, GRINDING, SANDING/MACHINING MAY CAUSE IRRIT.
SKIN CONT:ALLERGIC RXN: SIGNS/ (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:SYMPS CAN INCL REDNESS, SWELL,
BLISTERING & ITCH. BURNS (CHEM CORROSIVITY): SIGNS/SYMPS CAN INCL
REDNESS, SWELL, ITCH, PAIN, BLISTERING, ULCERATION, SLOUGHING & SCAR
FORM. INHAL:IRRIT (UPPER RESP): SIGNS/SYMPS CAN INCL SORENESS OFNOSE &
THROAT, COUGH & SNEEZING. VAPS OF HEATED MATL MAY CAUSE RESP SYS (SUPDAT)
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES:IMMED FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS. GET IMMED
MED ATTN. SKIN:IMMED FLUSH W/LG AMTS OF WATER FOR AT LST 15 MINS IN CHEM
SAFETY SHOWER WHILE REMOVING CONTAM CLTHG & SHOES. GET IMMED MED ATTN.
WASH CONTAM CLTHG BEFORE REUSE. INHAL:REMOVE PERSON TO FRESH AIR. IF
SIGNS/SYMPTOMS CONTINUE, CALL MD. INGEST:DO NOT INDUCE VOMITING. DRINK TWO
GLASSES OF WATER. CALL MD.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REFER TO OTHER SECTIONS OF THIS MSDS FOR INFO
REGARDING PHYSICAL & HLTH HAZS, NIOSH APPRVD RESP PROT, VENT &
PERSONAL PROT EQUIP. CALL (612)733-1110 OR (612)733-6100 FOR 24-HR SPILL
ASSISTANCE. COVER W/ABSORB MATL. COLLECT SPILLED MATL. PLACE(SUPDAT)
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISP MUST BE I/A/W FED, STATE & LOC REGS (FP N).
CURE PROD ACCORDING TO PROD INSTRUCTIONS. INCIN UNCURED WASTE IN
INDUS/COMMERCIAL INCIN. DISP OF COMPLETELY CURED (OR POLYMERIZED) MATL IN
SANIT LANDFI LL. SINCE REGS VARY, CONSULT APPLIC REGS/ (SUPDAT)
Handling And Storage Precautions: AVOID EYE CONTACT. AVOID SKIN CONTACT. AVOID
BREATHING OF VAPORS. AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING OR
GRINDING.
Other Precautions: DO NOT EAT, DRINK OR SMOKE WHEN USING THIS PRODUCT. DO NOT
INGEST. STORE AWAY FROM HEAT. KEEP OUT OF THE REACH OF CHILDREN. KEEP
CONTAINER TIGHTLY CLOSED.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: 340F,171C
Extinguishing Media: WATER, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN.
=======================================================
Control Measures
=======================================================
Respiratory Protection: SELECT ONE THE FOLLOWING NIOSH APPROVED RESPIRATORS
BASED ON AIRBORNE CONCENTRATION OF CONTAMINANTS & I/A/W OSHA REGULATIONS:
HALF-MASK DUST RESPIRATOR.
Ventilation: PROVIDE APPROP LOC EXHST FOR GRINDING, CUTTING/SANDING CURED MATL.
CURING OVENS MUST BE EXHAUSTED TO OUTDOORS/TO
Protective Gloves: POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: WASH EXPOSED AREAS THOROUGHLY W/SOAP & WATER.
Supplemental Safety and Health: NOTE:USERS OF "L" VERSION SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO (FP N). MFR'S TRADE NAME/PART NO:WHITE EPOXY ADHESIVE
(1PB). CNDTNS(STAB):PROD OF INTENSE HEAT & SMOKE. SPILL PROC:IN U.S.
DOT-APPR VD CNTNR & SEAL. WASTE DISP METH:AUTHS BEFORE DISP. EYE
PROT:& FULL LGTH FCSHLD (FP N). EFTS OF OVEREXP:IRRIT.
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Density: 3.72
Spec Gravity: 1.09 (H*2O=1)
Solubility in Water: SLIGHT
Appearance and Odor: VISCOUS LIQUID, AMBER; VERY MILD PUNGENT ODOR.
Percent Volatiles by Volume: 0 (WT)
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT IS GENERATED DURING CURE. DO NOT CURE MASS
>50 GMS IN CONFINED SPACE TO PVNT PREMATURE RXN (EXOTHERM) W/ (SUPDAT)
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: CARBON MONOXIDE & CARBON DIOXIDE, OXIDES OF
NITROGEN, AMINE COMPOUNDS, TOXIC VAPORS, GASES OR PARTICULATES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 62-3693-9530-6, SCOTCH-WELD 460 (PART A) OFF-(SUPDAT)
Company: MINNESOTA MINING AND MFG CO ENGINEERING DOCUMENT SYSTEMS DIV
Street: 3M CTR
City: SAINT PAUL MN
Zipcode: 55144-1000
Health Emergency Phone: 612-733-1110
Label Required IND: Y
Date Of Label Review: 12/20/1996
Status Code: C
Label Date: 12/20/1996
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE:EYE CONTACT:CHEMICAL RELATED BURNS
(CHEMICAL CORROSIVITY): SIGNS OR SYMPTOMS CAN INCLUDE CLOUDY APPEAR OF
CORNEA, CHEMICAL BURNS, PAIN, TEARING, ULCERS, IMPAIRED VISION OR LOSS OF V
ISION. VAPORS FROM HEATED MATERIAL MAY CAUSE IRRITATION. DUST CREATED BY
CUTTING, GRINDING, SANDING OR MACHINING MAY CAUSE IRRITATION. SKIN
CONTACT:ALLERGIC REACTION; BURNS. INHALATION:IRRITATION. ING
ESTION:IRRITATION. CHRONIC:NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
OTR PREMIUM PLUS 4, 44-440-1
| |
|
OTR PREMIUM PLUS 4, 44-20-2
| |
|
ATL AIR TOOL LUBRICANT, ATL004
| |
|
ATL AIR TOOL LUBRICANT, ATL016
| |
|
ATL AIR TOOL LUBRICANT, ATL128
| |
|
TURBINE OIL GST ISO 68, CPS238059
| |
|
TURBINE OIL GST ISO 68, CPS253028
| |
|
LIQUID ROC 300 POLYESTER PUMP, PART A
| |
|
62-3693-9530-6, SCOTCH-WELD 460 (PART A) OFF-(SUPDAT)
| |
|
XL-300 AIR COMPRESSORS
| |
|
COPPER CYANIDE
| 544-92-3 |
|
TRIM MIST
| |
|
NEW SAFETY YELLOW, 35-35-150
| 111-77-3
26530-20-1
111-76-2
107-21-1
111-46-6 |
|
SYSTEM SIX SEALER
| 25085-82-9
109-99-9
108-94-1
78-93-3 |
|
CARPET TILE ADHESIVE SYSTEM SIX ADHESIVE
| |
|
ADHESIVE CLEANER SYSTEM SIX CLEANER
| 108-10-1
67-63-0
78-93-3 |
|
VALVE GRINDING COMPOUND, 80036
| 409-21-2
7732-18-5
107-21-1
8001-79-4
102-71-6
9003-01-4 |
|
21087, OUTPUT 384 ADHESIVE (SUPDAT)
| 142-82-5
68411-20-1
67-63-0
13395-16-9 |
|
FORMULA 7600
| |
|
ALK TEST TABLETS, 3920
| |
|
ADVANTAGE 2000 DEVELOPER KB-1A
| |
|
UNITED 894 ZYME-OUT
| |
|
60:60 RINSE: APF SOLUTION, PART A
| |
|
60:60 RINSE: APF SOLUTION, PART B
| 7783-47-3 |
|
OXFORD MT-403A, 07663
| 7664-38-2
111-76-2
7732-18-5
9016-45-9 |
|
GARDSEAL
| 1344-09-8 |
|
RUST X, G016
| |
|
RUST X, G032
| |
|
RUST X, G128
| |
|
RUST X, G005
| |
|
RUST X, G054
| |
|
D27012, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
H27012, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
I27012, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
D27812, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
H27812, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
I27812, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
A2725, SINGLE ELEMENT SOLUTION STANDARD, (SUPP DATA)
| 7440-48-4
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, D15015 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, H15015 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, I15015 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, D15815 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, H15815 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, I15815 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
PHOSPHORUS, WATER TR HNO3 MATRIX, A1555 (SUPDAT)
| 7722-76-1
7697-37-2
7732-18-5 |
|
D24018, SINGLE ELEMENT SOLUTION (SUPDAT)
| 13548-38-4
7697-37-2
7732-18-5 |
|
H24018, SINGLE ELEMENT SOLUTION (SUPDAT)
| 13548-38-4
7697-37-2
7732-18-5 |
|
I24018, SINGLE ELEMENT SOLUTION (SUPDAT)
| 13548-38-4
7697-37-2
7732-18-5 |
|
D24818, SINGLE ELEMENT SOLUTION (SUPDAT)
| 13548-38-4
7697-37-2
7732-18-5 |
|
H24818, SINGLE ELEMENT SOLUTION (SUPDAT)
| 13548-38-4
7697-37-2
7732-18-5 |
|
|