HILTI INC -- ABRASIVE BLADES AND WHEELS
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CDRLM
MSDS NAME: ABRASIVE BLADES AND WHEELS
Responsible Party
Name: HILTI INC
Address: 5400 S 122ND EAST AVENUE
Box: 21148
City: TULSA OK 74121-5000
Info Phone: 918-252-6000/800-879-4444
Emergency Phone Number: 918-252-6000/800-879-4444
Review Ind: Y
Published: Y
=======================================================
Preparer Co. when other than Responsible Party Co.
=======================================================
Assigned Ind: Y
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
=======================================================
Contractor Summary
=======================================================
Name: HILTI INC
Address: 5400 S 122ND E AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800--879-6000
Name: HILTI INC
Address: 5400 S 122ND EAST AVE
Box: 21148
City: TULSA OK 74121
Phone: 918-252-6000/800-879-6000
=======================================================
Ingredients
=======================================================
Cas: 1344-28-1
RTECS #: BD1200000
Name: ALUMINUM OXIDE, BAUXITE, ALUMINA, DIALUMINUM TRIOXIDE *96-4*
OSHA PEL: 10 MG/CUM
ACGIH TLV: 10 MG/CUM
------------------------------
Cas: 409-21-2
RTECS #: VW0450000
Name: SILICON CARBIDE
OSHA PEL: 10 MG/CUM
ACGIH TLV: 10 MG/CUM
------------------------------
Cas: 1314-23-4
RTECS #: ZH8800000
Name: ZIRCONIUM OXIDE, ZIRCONIUM DIOXIDE *96-4*
OSHA PEL: 5 MG/CUM
ACGIH TLV: 5 MG/CUM
------------------------------
Cas: 1305-78-8
RTECS #: EW3100000
Name: CALCIUM OXIDE; LIME
OSHA PEL: 5 MG/CUM
ACGIH TLV: 2 MG/CUM
------------------------------
Cas: 7727-43-7
RTECS #: CR0600000
Name: BARIUM SULFATE, BARYTES *96-4*
OSHA PEL: 10 MG/CUM
ACGIH TLV: 10 MG/CUM
------------------------------
Cas: 12068-85-8
Name: IRON SULFIDE
-----------------------------
Name: FLUORIDES
-----------------------------
Name: PHENOLIC RESIN
-----------------------------
Name: FIBERGLASS
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: NO
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: DUSTS CAN CAUSE EYES & SKIN IRRITATION.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: IRRITATION, COUGHING, SHORTNESS OF BREATH.
Medical Cond Aggravated By Exposure: SKIN & RESPIRATORY CONDITIONS.
First Aid: EYES: FLUSH W/PLENTY OF WATER. DON'T RUB EYES. IF PARTICLES
PENETRATE/OTHERWISE BECOME LODGED/IMPALED IN EYE, DON'T ATTEMPT TO REMOVE.
COVER BOTH EYES TO PREVENT NATURAL MOVEMENT. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR.OBTAIN MEDICAL ATTENTION IN ALL CASES.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: KEEP DUSTS FROM ACCUMULATING.
Waste Disposal Methods: DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A DRY AREA. AVOID EXTREME TEMP
CHANGES, ESPECIALLY BELOW FREEZING.
Other Precautions: AVOID EXPOSURE TO DUSTS GENERATED FROM MATERIAL BEING
GROUND. DON'T EXCEED MAXIMUM RPM SHOWN ON BLADE/WHEEL. DON'T USE DAMAGED
WHEELS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: AS APPROPRIATE FOR MATERIAL BEING CUT.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR A NIOSH APPROVED DUST/MIST RESPIRATOR IF EXPOSURE
LIMITS FOR DUSTS ARE EXCEEDED/VENTILATION ISN'T ADEQUATE TO CONTROL DUSTS.
Ventilation: LOCAL EXHAUST MAY BE REQUIRED TO MAINTAIN EXPOSURES
<RECOMMENDED LEVELS.
Protective Gloves: IF DESIRED
Eye Protection: SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment: SAFETY GOGGLES
=======================================================
Physical/Chemical Properties
=======================================================
Appearance and Odor: SOLID, DARK COLORED W/NO ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: EXTREME HEAT/COLD, EXCESSIVE MOISTURE/HUMIDITY.
Materials To Avoid: ACIDS, SOLVENTS.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: ABRASIVE BLADES AND WHEELS
Assigned IND: Y
Company: HILTI INC
Street: 5400 S 122ND EAST AVE
PO Box: 21148
City: TULSA OK
Zipcode: 74121
Health Emergency Phone: 918-252-6000/800-879-4444
Label Required IND: Y
Date Of Label Review: 10/12/1999
Status Code: A
Origination Code: G
Hazard And Precautions: DUSTS CAN CAUSE EYES & SKIN IRRITATION.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.