poly (dimethylsiloxane); (poly(dimethylsiloxane), dimethyl) silica, amorphous (fumed); (silica, amorphous, fumed, crystalline-free) ethyltriacetoxysilane silane, methyltriacetoxy-; (methyltriacetoxysilane) acetic acid (cercla) (formed when product is exposed to moisture).
LOCTITE CORP -- SUPERFLEX SILICONE ADH/SLNT CLEAR, 59530
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGBMW
MSDS NAME: SUPERFLEX SILICONE ADH/SLNT CLEAR, 59530
Responsible Party
Name: LOCTITE CORP
Address: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT 06067-3910
Info Phone: 860-571-5100
Emergency Phone Number: 860-571-5100
Preparer's Name: STEPHEN REPETTO
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LOCTITE CORP
Address: 705 N MT RD
City: NEWINGTON CT 06111
Phone: 312-689-6200
Name: LOCTITE CORPORATION
Address: 1001 TROUT BROOK CROSSING
City: ROCKY HILL CT 06067-3910
Phone: 860-571-5100
=======================================================
Ingredients
=======================================================
Cas: 63148-62-9
RTECS #: JJ6484500
Name: POLY (DIMETHYLSILOXANE); (POLY(DIMETHYLSILOXANE), DIMETHYL)
% Wt: 85-90
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 112945-52-5
RTECS #: VV7310000
Name: SILICA, AMORPHOUS (FUMED); (SILICA, AMORPHOUS, FUMED, CRYSTALLINE-FREE)
% Wt: 5-10
Other REC Limits: 3 MG/M3 RDUST (MFR)
OSHA PEL: 6 MG/M3
ACGIH TLV: 10 MG/M3
------------------------------
Cas: 17689-77-9
Name: ETHYLTRIACETOXYSILANE
% Wt: 1-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 4253-34-3
RTECS #: VV4500000
Name: SILANE, METHYLTRIACETOXY-; (METHYLTRIACETOXYSILANE)
% Wt: 1-5
OSHA PEL: N/K (FP N)
ACGIH TLV: N/K (FP N)
------------------------------
Cas: 64-19-7
RTECS #: AF1225000
Name: ACETIC ACID (CERCLA) (FORMED WHEN PRODUCT IS EXPOSED TO MOISTURE).
LEL:4%. UEL:19.9% @ 200F.
% Wt: 3-5
OSHA PEL: 10 PPM
ACGIH TLV: 10 PPM;15 STEL
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: LD50:(ORAL) 2060 MG/KG.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE AND SKIN IRRITANT. MODERATE TOXICITY BY INGESTION.
ACETIC ACID PRODUCED DURING CURE IRRITATES EYES, NOSE AND THROAT. PROLONGED
OR REPEATED CONTACT MAY IRRITATE SKIN. TARGET ORGAN AND OTHER HEALTH
EFFECTS: POLY (DIMETHYLSILOXANE), DIMETHYL): IRRITANT; SILICA, AMORPHOUS,
FUMED, CRYSTALLINE-FREE: (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ:NUISANCE DUST; ACETIC ACID:
CORROSIVE, EYES, GASTROINTESTINAL, IMMUNE SYSTEM, IRRITANT.
Medical Cond Aggravated By Exposure: METHYLTRIACETOXYSILANE: EYE, SKIN &
PULMONARY DISORDERS.
First Aid: INGEST:DO NOT INDUCE VOMITING. KEEP INDIVIDUAL CALM. OBTAIN MEDICAL
ATTENTION. INHAL:REMOVE TO FRESH AIR. TREAT SYMPTOMATICALLY. SKIN:WIPE OFF
PASTE W/PAPER TOWEL OR CLOTH. WASH EXPOSED AREA W/SOAP & WATER.
EYES:FLUSH AT LEAST 15 MINUTES W/WATER. OBTAIN MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WIPE OR SCRAPE UP SPILLED MATERIAL. MAINTAIN GOOD
VENTILATION FOR LARGE SPILLS. PLACE SCRAP MATERIAL IN A WELL VENTILATED AREA
& ALLOW TO CURE TO RUBBER.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSAL MUST BE I/A/W FEDERAL, STATE & LOCAL
REGULATIONS (FP N). CURED RUBBER CAN BE INCINERATED. FOLLOW EPA & LOCAL
REGULATIONS. NOT A RCRA HAZARDOUS WASTE MATERIAL.
Handling And Storage Precautions: STORE IN A DRY AREA BELOW 90F. KEEP CONTAINER
CLOSED WHEN NOT IN USE. (CONTACT LOCTITE CUSTOMER SERVICE 1-800-243-4874 FOR
SHELF LIFE INFORMATION).
Other Precautions: AVOID BREATHING VAPOR. AVOID EYE OR SKIN CONTACT. ACETIC
ACID VAPOR RELEASED DURING APPLICATION & CURE. DO NOT WEAR CONTACT LENSES
WHILE APPLYING MATERIAL. VAPOR MAY BE TRAPPED UNDER LENS.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: TCC
Flash Point Text: >200F,>93C
Lower Limits: SEE ING 5
Upper Limits: SEE ING 5
Extinguishing Media: CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: NONE.
=======================================================
Control Measures
=======================================================
Respiratory Protection: NIOSH APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN (FP N).
Ventilation: PROVIDE LOCAL VENTILATION FOR PROLONGED USE IN A CONFINED AREA.
Protective Gloves: RUBBER OR PLASTIC GLOVES.
Eye Protection: ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment: EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA (FP N).
Work Hygienic Practices: DO NOT WEAR CONTACT LENSES WHILE APPLYING MATERIAL.
Supplemental Safety and Health: EYE PROT:& FULL LENGTH FACESHIELD (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Vapor Pres: 10 @ 80F
Spec Gravity: 1.01
VOC Grams/Liter: 48
Solubility in Water: POLYMERIZED
Appearance and Odor: CLEAR PASTE; SHARP, IRRITATING ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: POLYMERIZED BY CONTACT W/MOISTURE. ACETIC ACID
LIBERATED.
Materials To Avoid: NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products: ACETIC ACID, FORMALDEHYDE, SILICA FUME.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
Other Information: VOLATILE ORGANIC COMPOUNDS (EPA METHOD 24): 4.7%; 47.47 G/L.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: SUPERFLEX SILICONE ADH/SLNT CLEAR, 59530
Company: LOCTITE CORP
Street: 705 N MT RD
City: NEWINGTON CT
Zipcode: 06111
Health Emergency Phone: 860-571-5100
Label Required IND: Y
Date Of Label Review: 01/14/1998
Status Code: C
Label Date: 01/14/1998
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: CAUTION
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: ACUTE:EYE AND SKIN IRRITANT. MODERATE TOXICITY BY
INGESTION. ACETIC ACID PRODUCED DURING CURE IRRITATES EYES, NOSE AND THROAT.
PROLONGED OR REPEATED CONTACT MAY IRRITATE SKIN. TARGET ORGAN AND OTHER H
EALTH EFFECTS: POLY (DIMETHYLSILOXANE),DIMETHYL): IRRITANT; SILICA,
AMORPHOUS, FUMED, CRYSTALLINE-FREE:NUISANCE DUST; ACETIC ACID:CORROSIVE,
EYES, GASTROINTESTINAL, IMMUNE SYSTEM, IRRITANT. CHRONIC:NO NE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.