Search   
MSDS  : TITANIUM/TITANIUM ALLOY, TI-6-6-2
CAS  : 7429-90-5
1333-86-4
7440-47-3
7440-50-8
1309-37-1
7439-98-7
7440-31-5
13463-67-7
1314-62-1
7440-67-7
NAME  : aluminum (sara 313)
carbon black
chromium (sara 313) (cercla)
copper (sara 313) (cercla)
iron (iii) oxide
molybdenum
tin
titanium oxide; (titanium dioxide)
vanadium pentoxide (sara 302) (cercla)
zirconium
supdat: constitute physical haz/hlth haz. however, operations such as
ing 11: brazing, grinding, cutting, polishing, & possibly machining,
ing 12: to/above its melting point/rslts in generation of airborne
ing 13: no evid of hlth haz from inhal of titanium dioxide in concs not
ing 14: dioxide has been found to be relatively inert. skin cont
ing 15: eye cont w/metallic matls has shown particulate irrit. chromium
ing 16: have been identified as suspect human carcins by iarc, ntp annual
ing 17: scientific studies which show incr incidence of cancer/other
ing 18: other elements, as incorporated in titanium prods. expos to fumes
ing 19:pallor, chest pain, cough, palpitation, lung changes due to efts
ing 20: w/adverse hlth efts assoc w/listed constituents in excess of osha
ing 21: prlngd overexp to alloy dusts/fumes may cause skin, eye,
other prec: taken to avoid resulting exposures when handling cutting,
DYNAMET INC -- TITANIUM/TITANIUM ALLOY, TI-6-6-2
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CGZVP
MSDS NAME: TITANIUM/TITANIUM ALLOY, TI-6-6-2
Responsible Party
Name: DYNAMET INC
Address: 195 MUSEUM RD
City: WASHINGTON PA 15301
Info Phone: 412-228-1000
Emergency Phone Number: 412-228-1000;800-424-9300(CHEMTREC)
Preparer's Name: A DONLEVY
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: DYNAMET INC
Address: 195 MUSEUM RD
City: WASHINGTON PA 15301
Phone: 412-228-1000
=======================================================
Ingredients
=======================================================
Cas: 7429-90-5
RTECS #: BD0330000
Name: ALUMINUM (SARA 313)
% Wt: 0-8
OSHA PEL: 15 MG/M3 DUST
ACGIH TLV: 10 MG/M3 DUST
------------------------------
Cas: 1333-86-4
RTECS #: FF5800000
Name: CARBON BLACK
% Wt: 0-0.1
OSHA PEL: 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3
------------------------------
Cas: 7440-47-3
RTECS #: GB4200000
Name: CHROMIUM (SARA 313) (CERCLA)
% Wt: 0-11
OSHA PEL: 1 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Rpt Qty: 1 LB
DOT Rpt Qty: 1 LB
------------------------------
Cas: 7440-50-8
RTECS #: GL5325000
Name: COPPER (SARA 313) (CERCLA)
% Wt: 0-0.2
OSHA PEL: 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2 MG/M3 FUME
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 1309-37-1
RTECS #: NO7400000
Name: IRON (III) OXIDE
% Wt: 0-0.3
OSHA PEL: 10 MG/M3 (FE)
ACGIH TLV: 5 MG(FE)/M3 FUME, B2
------------------------------
Cas: 7439-98-7
RTECS #: QA4680000
Name: MOLYBDENUM
% Wt: 0-12
OSHA PEL: 10 PPM.
ACGIH TLV: 10 PPM.
------------------------------
Cas: 7440-31-5
RTECS #: XP7320000
Name: TIN
% Wt: 0-3
OSHA PEL: 2 MG/M3
ACGIH TLV: 2 MG/M3
------------------------------
Cas: 13463-67-7
RTECS #: XR2275000
Name: TITANIUM OXIDE; (TITANIUM DIOXIDE)
% Wt: 0-5
OSHA PEL: 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
------------------------------
Cas: 1314-62-1
RTECS #: YW2450000
Name: VANADIUM PENTOXIDE (SARA 302) (CERCLA)
% Wt: 0-2
OSHA PEL: C,0.5 MG/M3
ACGIH TLV: 0.05 MG/M3 RDUST
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 7440-67-7
RTECS #: ZH7070000
Name: ZIRCONIUM
% Wt: 0-4
OSHA PEL: 5 MG/M3
ACGIH TLV: 5 MG/M3/10 STEL
------------------------------
Name: SUPDAT: CONSTITUTE PHYSICAL HAZ/HLTH HAZ. HOWEVER, OPERATIONS SUCH AS
ABRADING, BURNING, WELDING SAWING,
-----------------------------
Name: ING 11: BRAZING, GRINDING, CUTTING, POLISHING, & POSSIBLY MACHINING,
ETC WHICH RSLTS IN ELEVATING TEMP OF PROD
-----------------------------
Name: ING 12: TO/ABOVE ITS MELTING POINT/RSLTS IN GENERATION OF AIRBORNE
PARTICULATE, MAY PRESENT HLTH HAZS. THERE IS
-----------------------------
Name: ING 13: NO EVID OF HLTH HAZ FROM INHAL OF TITANIUM DIOXIDE IN CONCS NOT
EXCEEDING 10 MG/M. TOX OF TITANIUM
-----------------------------
Name: ING 14: DIOXIDE HAS BEEN FOUND TO BE RELATIVELY INERT. SKIN CONT
W/TITANIUM DUSTS MAY CAUSE PHYSICAL ABRASION.
-----------------------------
Name: ING 15: EYE CONT W/METALLIC MATLS HAS SHOWN PARTICULATE IRRIT. CHROMIUM
METAL DUST, ORE, & VARIOUS CHEM CMPDS
-----------------------------
Name: ING 16: HAVE BEEN IDENTIFIED AS SUSPECT HUMAN CARCINS BY IARC, NTP ANNUAL
RPT. WE BELIEVE THERE ARE NO
-----------------------------
Name: ING 17: SCIENTIFIC STUDIES WHICH SHOW INCR INCIDENCE OF CANCER/OTHER
DISEASE DUE TO EXPOS TO FORM OF CHROMIUM/
-----------------------------
Name: ING 18: OTHER ELEMENTS, AS INCORPORATED IN TITANIUM PRODS. EXPOS TO FUMES
& DUST CAN CAUSE RESP IRRIT, SKIN
-----------------------------
Name: ING 19:PALLOR, CHEST PAIN, COUGH, PALPITATION, LUNG CHANGES DUE TO EFTS
OF 1/MORE OF ELEMENTS PRESENT CONSISTENT
-----------------------------
Name: ING 20: W/ADVERSE HLTH EFTS ASSOC W/LISTED CONSTITUENTS IN EXCESS OF OSHA
PERMISSIBLE EXPOS LIMITS ESTABLISHED.
-----------------------------
Name: ING 21: PRLNGD OVEREXP TO ALLOY DUSTS/FUMES MAY CAUSE SKIN, EYE,
THROAT/NOSE IRRITATIONS, LEADING TO PULMONARY DISEASES.
-----------------------------
Name: OTHER PREC: TAKEN TO AVOID RESULTING EXPOSURES WHEN HANDLING CUTTING,
(THERMAL OR MECH) AND/OR HEATING OR MELTING.
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: YES
IARC: YES
OSHA: NO
Effects of Exposure: POSS SIGNS & SYMPS OF EXPOS TO DUST, WELDING FUME,
& GASES: ACUTE: METALLIC TASTE; NAUS, TIGHTNESS OF CHEST; FEVER; IRRIT OF
EYES, NOSE THROAT & SKIN; LOSS OF CONSCIOUSNESS/DEATH DUE TO WELDING
GASES/ LACK OF OXYG. CHRONIC:ADVERSE EFTS MAY/MAY NOT RSLT FROM
LONG-TERM(CHRONIC) EXPOS TO DUST, FUME, GASES,(EFTS OF OVEREXP)
Explanation Of Carcinogenicity: CARBON BLACK:IARC MONO, VOL 65, PG 149,
1996:GROUP 2B. CHROMIUM:NTP 7TH ANNUAL RPT ON CARCINS, 1994: KNOWN TO BE
CARCIN.
Signs And Symptions Of Overexposure: HLTH HAZ: ETC THAT OCCUR BY WAY OF
SUBSEQUENT OPERATIONS ON PROD. SOME STUDIES WOULD ASSOC ONE (OR MORE) OF
CONSTITUENTS (PER INGRED SECTION) WITH POTNTL FOR NEUROLOGIC, PULM, RESP,
SKIN/OTHER DISEASE . CHROMIUM IN VARIOUS CHEM CMPDS HAS BEEN IDENTIFIED AS
SUSPECT HUMAN CARCINS BY IARC, NTP ANNUAL RPT. HLTH HAZ (SUPDAT)
Medical Cond Aggravated By Exposure: AGGRAVATION OF PREEXISTING RESPIRATORY OR
ALLERGIC CONDITIONS MAY OCCUR IN SOME WORKERS.
First Aid: INHAL: REMOVE TO FRESH AIR, IF CNDTN CONTINUES, CONSULT PHYS. EYE
CONT: FLUSH WELL W/RUNNING WATER TO REMOVE PARTICULATE FOR AT LST 15 MINS,
GET MED ATTN. SKIN CONT: BRUSH OFF EXCESS DUST. WASH AREA W ELL W/SOAP &
WATER. INGEST: SEEK MED HELP IF LARGE QUANTITIES OF MATERIAL HAVE BEEN
INGESTED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: FINE MATERIAL SHOULD BE SWEPT OR VACUUMED. AVOID
USING COMPRESSED AIR TO MANEUVER SPILLS OR LEAKS OF DUSTY MATERIAL TO AVOID
EYE CONTAMINATION.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH APPLICABLE FEDERAL,
STATE, AND LOCAL REGULATIONS. SCRAP METAL CAN BE RECLAIMED FOR REUSE.
Handling And Storage Precautions: USE GOOD HOUSKEEPING PRACTICES TO PREVENT
ACCUMULATIONS OF DUST AND TO KEEP AIRBORNE DUST CONCENTRATIONS AT A MINIMUM.
Other Precautions: THIS MATL IS POTNTLY CONTAMD W/COATINGS SUCH AS OILS FOR
PRESERVATIVES & OTHER CONTAMINANTS. IF MATL IS CONTAMD, SPEC PRECAUTIONS
(SUCH AS PROCESS CTL & PERSONAL PROT EQUIP APPROP TO NATURE OF SUSPECT ED
CONTAMINANTS) SHOULD BE
=======================================================
Fire and Explosion Hazard Information
=======================================================
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: TITANIUM/TITANIUM ALLOY PRODS IN FORM SUPPLIED
ARE NOT CONSIDERED COMBUST. HOWEVER, SUBSEQUENT PROCESSING (CUTTING, WELDING,
GRINDING/POLISHING, ETC IN (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF FUMES, MISTING OR DUST CONDITION OCCURS AND TLV AS
INDICATED IN INGREDIENT SECTION IS EXCEEDED, PROVIDE NIOSH APPROVED
RESPIRATORS.
Ventilation: GENERAL - RECOMMENDED (TO KEEP AIRBORNE CONC OF DUST AND FUMES
BELOW ACGIH RLV'S). LOCAL - AS REQUIRED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPRVD EYE WASH & DELUGE SHOWER (FP N).
Work Hygienic Practices: NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health: MP: >2840F,>1560C. EXPLO HAZ: ABSENCE OF
OXYG) MAY RSLT IN FINELY DIVIDED WASTE WHICH IS IGNITABLE, & WHICH MAY
PRESENT FIRE & EXPLO HAZARDS. CNDTNS TO AVOID: PRESENTS MOD FIRE &
EXPLO HAZS. MOLTEN ME TAL WILL REACT VIOLENTLY W/WATER. EFTS OF OVEREXP:
INFO: MFR DOES NOT CONSIDER PROD IN FORM IT IS SOLD TO
=======================================================
Physical/Chemical Properties
=======================================================
M.P/F.P Text: SUPDAT
Spec Gravity: 4.5-5.5
Solubility in Water: INSOLUBLE
Appearance and Odor: VARIOUS SHAPES, SOLID, ODORLESS METAL.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: THIS IS STABLE MATL @ ROOM TEMP UNDER NORMAL
STORAGE & HNDLG CNDTNS. AVOID GENERATION OF AIRBORNE DUST WHICH (SUPDAT)
Materials To Avoid: ACIDS, BASES, & OXIDIZERS. PVNT ELECTROSTATIC BUILDUPS. IF
IGNITED, USE DRY CHEMICAL EXTING, NEVER WATER (EXPLO HAZARD).
Hazardous Decomposition Products: NONE SPECIFIED BY MANUFACTURER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: TITANIUM/TITANIUM ALLOY, TI-6-6-2
Company: DYNAMET INC
Street: 195 MUSEUM RD
City: WASHINGTON PA
Zipcode: 15301
Health Emergency Phone: 412-228-1000;800-424-9300(CHEMTREC)
Label Required IND: Y
Date Of Label Review: 04/29/1998
Status Code: C
Label Date: 04/29/1998
Origination
Chronic Hazard IND: Y
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Slight
Fire Hazard: None
Reactivity Hazard: None
Hazard And Precautions: ACUTE: METALLIC TASTE; NAUSEA, TIGHTNESS OF CHEST;
FEVER; IRRITATION OF EYES, NOSE THROAT & SKIN; LOSS OF CONSCIOUSNESS OR
DEATH DUE TO WELDING GASES OR LACK OF OXYGEN. CHRONIC: CANCER HAZARDS. CONTAI
NS CARBON BLACK AND CHROMIUM, WHICH ARELISTED AS ANIMAL LUNG CARCINOGENS (FP
N).
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
FLECK STONE, TOP COAT 446 67-64-1
1330-20-7
68476-86-8
DYNACHEM ANTIFOAM 80
SUPER LUBE SYNTH LUBRICANT WITH TEFLON, 82328
COATING THINNER, B9951R 100-41-4
1330-20-7
108-65-6
88917-22-0
RETINAX LC GREASE, 70428
BRUSH CHROMATE TREATMENT 1333-82-0
7697-37-2
7732-18-5
EPN EP-NII CARTRIDGE BLACK, R64-2005
TFE PASTE, 023055
78-8032-2065-2, SCOTCH-GRIP 847 RUBBER AND (SUPDAT) 67-64-1
9003-18-3
9003-35-4
8050-31-5
69-72-7
1314-13-2
68411-46-1
62-0847-9531-9, SCOTCH-GRIP 847 RUBBER AND (SUPDAT) 67-64-1
9003-18-3
9003-35-4
8050-31-5
69-72-7
1314-13-2
68411-46-1
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 668H 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 108 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 669 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 661W 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 669S 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 108S 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 559S 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 58 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 59 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 808 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVELOPER FLUID CONTAINED IN POD OF FILM TYPE 809 1310-58-3
95-14-7
10551-21-0
10196-18-6
PCID ULTRAVIOLET; DEVELOPER FLUID CONTAINED (SUPDAT) 1310-58-3
95-14-7
10551-21-0
10196-18-6
DEVTHANE 359 CLEAR CONVERTER, 359C0910 123-86-4
28182-81-2
1330-20-7
108-88-3
5-MINUTE EPOXY HARDENER, 14200 90-72-2
5-MINUTE EPOXY HARDENER, 14630 90-72-2
5-MINUTE EPOXY HARDENER, 14630 90-72-2
PRONTO CA-7 INSTANT ADHESIVE, 62-3812-3830-2 137-05-3
9011-14-7
123-31-9
GREEN COLOR 24272, F-150 EPOXY-POLYAMIDE (SUPP DATA)
DINSRDE 2844-1188 COMP A-BK, 13111
DINSRDE 2844-1188 COMP B-BK, 13112
78-6969-5889-7, 00-51122-00219-9, (SUPDAT) 7439-89-6
25213-39-2
58353-09-6
39382-25-7
1333-86-4
9003-07-0
8005-02-5
EXXSOL HEPTANE SOLVENT
M-SERIES TONER KIT G723-01
17278A (BLACK), TONER (PRE-MIXED) FOR (SUP DAT)
17242C (CYAN), TONER (PRE-MIXED) FOR (SUP DAT)
17243M (MAGENTA), TONER (PRE-MIXED) FOR (SUP DAT)
17244Y (YELLOW), TONER (PRE-MIXED) FOR (SUP DAT)
MOLYBDATE REAGENT POWDER PILLOWS, 21073 10102-40-6
70-0701-8213-7, SCOTCHLITE GLASS BUBBLES (SUPDAT) 65997-17-3
112945-52-5
SUPER LUBE GREASE
FLOOR GROUT & JOINT FILLER 65997-15-1
14808-60-7
147-14-8
10361-37-2
EPK (EPS) 462 PART A, AA9307
SCOTCH-SEAL 2084 METAL SEALANT, 00-21200-20232-2 67-64-1
9003-18-3
1332-58-7
25085-50-1
8050-31-5
69-72-7
7429-90-5
1314-13-2
112945-52-5
SCOTCH-SEAL 2084 METAL SEALANT, 00-21200-20231-5 67-64-1
9003-18-3
1332-58-7
25085-50-1
8050-31-5
69-72-7
7429-90-5
1314-13-2
112945-52-5
SCOTCH-SEAL 2084 METAL SEALANT, 00-21200-20230-8 67-64-1
9003-18-3
1332-58-7
25085-50-1
8050-31-5
69-72-7
7429-90-5
1314-13-2
112945-52-5
DARATHENE PLUS AEROSOL, 5625
LAMINAR MX DRY FILM PHOTOPOLYMER, L-S451
TITANIUM/TITANIUM ALLOY, TI-6-4 7429-90-5
1333-86-4
7440-47-3
7440-50-8
1309-37-1
7439-98-7
7440-31-5
13463-67-7
1314-62-1
7440-67-7
TITANIUM/TITANIUM ALLOY, TI-6-6-2 7429-90-5
1333-86-4
7440-47-3
7440-50-8
1309-37-1
7439-98-7
7440-31-5
13463-67-7
1314-62-1
7440-67-7
TITANIUM/TITANIUM ALLOY, TI-8-1-1 7429-90-5
1333-86-4
7440-47-3
7440-50-8
1309-37-1
7439-98-7
7440-31-5
13463-67-7
1314-62-1
7440-67-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net