Search   
MSDS  : BSTFA, 0038828
CAS  : 25561-30-2
NAME  : bstfa
PIERCE CHEMICAL COMPANY -- BSTFA, 0038828
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CKHVN
MSDS NAME: BSTFA, 0038828
Responsible Party
Name: PIERCE CHEMICAL COMPANY
Address: 6747 N MERIDIAN RD
Box: 117
City: ROCKFORD IL 61105
Info Phone: 202-483-7616; 800-424-9300
Emergency Phone Number: 202-483-7616; 800-424-9300
Resp. Party Other MSDS No.: 0000417
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: PIERCE CHEMICAL COMPANY
Box: 117
City: ROCKFORD IL 61105
Phone: 815-968-0747
=======================================================
Ingredients
=======================================================
Cas: 25561-30-2
Name: BSTFA
Percent by Wt: 100.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: HARMFUL BY INGESTION, INHALATION, AND SKIN ABSORPTION.
MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE OF THE MUCOUS MEMBRANES AND UPPER
RESPIRATORY TRACT, EYES AND SKIN, INHALATION MAY BE FATAL AS A RESU LT OF
SPASM, INFLAMMATION, AND EDEMA OF THE LARYNX AND BRONCHI, CHEMICAL
PNEUMONITIS AND PULMONARY EDEMA. SYMPTOMS OF EXPOSURE MAY INCLUDE BURNING
SENSATION, COUGHING, WEEZING, LARYNGITIS, SHORTNESS O F BREATH, HEADACHE,
NAUSEA, AND VOMITING. TO THE BEST OF MFR'S KNOWLEDGE THE CHEMICAL, PHYSICAL,
AND TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: EYES: FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES, AND GET
MEDICAL ATTENTION. SKIN: FLUSH IMMEDIATELY WITH PLENTY OF WATER, FOLLOWED BY
THOROUGH SOAP AND WATER WASHINGS. SEEK MEDICAL ATTENTION FOR ANY ADVERSE
CONDITIONS. INHALATION: REMOVE FROM EXPOSURE INTO FRESH AIR. REST AND KEEP
WARM. IF ANY ADVERSE SIGNS APPEAR, GET MEDICAL ATTENTION. INGESTION: FLUSH
OUT MOUTH WITH WATER, ENSURING RIN SE IS NOT SWALLOWED.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR APPROPRIATE PROTECTIVE EQUIPMENT. CONTAIN THE
SPILL. PLACE IN A SUITABLE CONTAINER.
Waste Disposal Methods: DISPOSE OF IN ACORDANCE WITH ALL APPLICABLE FEDERAL,
STATE, AND LOCAL REGULATIONS.
Handling And Storage Precautions: STORE IN A DRY AREA AT REFRIGERATOR
TEMPERATURES FOR PROTECTION OF THE MATERIAL.
Other Precautions: NONE KNOWN.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point: =23.C, 73.4F
Extinguishing Media: CO*2, DRY CHEMICAL POWDER, OR FOAM. WATER MUST BE USED
WITH GREAT CAUTION.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT (FP N). FLAMMABLE LIQUID.
Unusual Fire/Explosion Hazard: CONTACT W/FIRE MAY PRODUCE IRRIT &/TOX
FUMES. AVOID H*2O IF POSS, SINCE BSTFA WILL REACT SOMEWHAT W/H*2O.
HEXAMETHYLDISILAZANE (HMDS), FLAMM LIQ, IS FORMED WHEN BSTFA HYDROLYZES IN
H*2O CNTNR EXPLOSIO N MAY OCCUR UNDER FIRE CNDTNS. VAP MAY TRAVEL
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION & FLASH BACK.
=======================================================
Control Measures
=======================================================
Respiratory Protection: FOLLOW THE OSHA RESPIRATOR REGULATIONS FOUND IN 29
CFR1910.134(E). ALWAYS USE A NIOSH APPROVED RESPIRATOR WHEN NECESSARY.
Ventilation: LOCAL EXHAUST: RECOMMENDED. CHEMICAL (GEN): REQUIRED. SPECIAL:
CHEMICAL FUME HOOD. OTHER: N/A.
Protective Gloves: CHEMICAL RESISTANT.
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES AND FULL LENGTH
FACESHIELD (FP N).
Other Protective Equipment: EYE WASH AND DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA (FP N).
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: =47.C, 116.6F
Melt/Freeze Pt: =-10.C, 14.F
Spec Gravity: 0.969 (H*2O = 1)
Solubility in Water: SOLUBLE
Appearance and Odor: YELLOW LIQUID; MUSTY ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: THIS MATERIAL IS MOISTURE SENSITIVE. REACTS
RAPIDLY WITH WATER OR ALCOHOL.
Materials To Avoid: STRONG OXIDIZING AGENTS, STRONG ACIDS, HYDROLYZES IN WATER
TO PRODUCE HEXAMETHYLDISILAZANE (HMDS), AN IRRITATING AND FLAMMABLE MATERIAL.
DECOMPOSES SLOWLY ON CONTACT WITH WATER.
Hazardous Decomposition Products: TOXIC FUMES OF CARBON MONOXIDE, CARBON
DIOXIDE, SILICON DIOXIDE, HYDROGEN FLUORIDE, NITROGEN OXIDES.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
=======================================================
Toxicological Information
=======================================================
Toxicological Information: TO THE BEST OF MFR'S KNOWLEDGE, THE CHEMICAL,
PHYSICAL, AND TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
=======================================================
Ecological Information
=======================================================
=======================================================
Other Information
=======================================================
Other Information: STATEMENT OF HAZARD: FLAMMABLE, CORROSIVE, CAUSES BURNS.
NFPA RATING: HEALTH 2, FLAMMABILITY 3, REACTIVITY 1.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: BSTFA, 0038828
Company: PIERCE CHEMICAL COMPANY
PO Box: 117
City: ROCKFORD IL
Zipcode: 61105
Health Emergency Phone: 202-483-7616; 800-424-9300
Label Required IND: Y
Date Of Label Review: 04/18/2000
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Severe
Contact Hazard: Severe
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: CORROSIVE. FLAMMABLE LIQUID. HARMFUL BY INGESTION,
INHALATION, AND SKIN ABSORPTION. MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE
OF THE MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT, EYES AND SKIN, INHA
LATION MAY BE FATAL AS A RESULT OF SPASM, INFLAMMATION, AND EDEMA OFTHE
LARYNX AND BRONCHI, CHEMICAL PNEUMONITIS AND PULMONARY EDEMA. SYMPTOMS OF
EXPOSURE MAY INCLUDE BURNING SENSATION, COUGHING, WEEZ ING, LARYNGITIS,
SHORTNESS OF BREATH, HEADACHE, NAUSEA, AND VOMITING. CHRONIC: NONE LISTED BY
MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
FLAMESAFE FSP 1077 FIRESTOP PUTTY
SAFETY-KLEEN MOTOR OIL, PREFIX 21
ECO SPRAY PART #402-1
00916,LPS ELECTRO 140 CONTACT CLEANER 64742-48-9
156539-68-3
124-38-9
THERMOMELT 188F ( 87C )
STAINLESS STEEL BARE WIRE, AWS 308L 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 308H 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 308LSI 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 309 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 309L 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 309LSI 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 310 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 312 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 316 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 316L 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 316LSI 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 317 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 317L 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 347 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 410 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 320 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 320LR 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 330 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 410NIMO 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 630 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4105-2
STAINLESS STEEL BARE WIRE, AWS 50S 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 50Z 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
SHOW COAT 8052-41-3
1602 BUFFER, PRECISION REFERENCE STANDARD (SUP DAT)
TRAY ADHESIVE 67-63-0
108-88-3
60607 1 PT V06R RED PRIMER 64742-89-8
2157-45-1
5593-70-4
109-86-4
STAINLESS STEEL BARE WIRE, AWS 409CB 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4105-16-6
STAINLESS STEEL BARE WIRE, AWS 420 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
STAINLESS STEEL BARE WIRE, AWS 2209 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-44-0
7723-14-0
7704-34-9
7727-37-9
7440-50-8
7440-03-1
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4405-1GR-2
POLYURETHANE SATIN, GALLON, 0523 8052-41-3
64-17-5
112926-00-8
71-43-2
108-88-3
POLYURETHANE SATIN, QUART, 0524 8052-41-3
64-17-5
112926-00-8
71-43-2
108-88-3
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4405-2
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4405-2-1
E-Z SCRUB SCRUB BRUSH POVIDONE IODINE DETERGENT, 372453
CE-PROCESS BLACK TYPE H, TYPE V80 TONER PREMIX,4405-32
E-Z SCRUB SCRUB BRUSH POVIDONE IODINE DETERGENT, 372513
BSTFA, 0038827 25561-30-2
BSTFA, 0038828 25561-30-2
CE-PROCESS BLACK TYPE H, TYPE V80 TONER PREMIX,4405-32-6
BSTFA, 0038829 25561-30-2
BSTFA, 003830 25561-30-2
CE-PROCESS BLACK TYPE H,TYPE V80 TONER PREMIX,4407-3

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net