POLYSPEC CORP -- 700 EPOXY RESIN,700000
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: CKJLY
MSDS NAME: 700 EPOXY RESIN,700000
Responsible Party
Name: POLYSPEC CORP
Address: 6614 GANT RD
City: HOUSTON TX 77066
Info Phone: 281-797-0033
Emergency Phone Number: 202-483-7616 (OUTSIDE U.S.)
Chemtrec IND/Phone: (800)424-9300
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: POLYSPEC MARINE PRODUCTS CORPORATION
Address: 6614 GANT RD
City: HOUSTON TX 77066
Phone: 281-397-0033
=======================================================
Ingredients
=======================================================
Cas: 115-86-6
RTECS #: TC8400000
Name: TRIPHENYL PHOSPHATE
< Wt: 6.
OSHA PEL: 3 MG/M3
ACGIH TLV: 3 MG/M3
ACGIH STEL: NOT ESTABLISHED
------------------------------
Cas: 84852-15-3
RTECS #: SM5650000
Name: PHENOL, 4-NONYL-, BRANCHED; (NONYL PHENOL)
< Wt: 6.
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: YES
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: INHALATION: VAPOR OR MIST MAY CAUSE RESPIRATORY
IRRITATION, DIZZINESS AND/OR NAUSEA. TIGHTNESS OF CHEST, SHORTNESS OF BREATH,
HEADACHE. SKIN AND EYE CONTACT: MAY CAUSE IRRITATION. SKIN ABSORPTION: REP
EATED OR PROLONGED CONTACT CAN CAUSE DEFATTING AND IRRITATION. INGESTION: LOW
TOXICITY.
Signs And Symptions Of Overexposure: SEE HEALTH HAZARDS.
First Aid: SKIN: WASH WITH MILD SOAP AND WATER. EYES: FLUSH, INCLUDING UNDER
EYELIDS, WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
PERSISTS, SEEK MEDICAL ADVICE. INGESTION: CALL MD. DO NOT INDUCE VOMITING.
NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. INHALATION: REMOVE TO
FRESH AIR.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: SOAK UP WITH ABSORBENT MATERIAL AND REMOVE TO CLOSED
CONTAINER. WASH AREA WITH MILD DETERGENT AND WATER.
Waste Disposal Methods: HANDLE DISPOSAL OF WASTE MATERIAL IN MANNER WHICH
COMPLIES WITH LOCAL, STATE, PROVINCE AND FEDERAL REGULATIONS. RCRA: THIS
PRODUCT DOES NOT MEET THE DEFINITIONS OR CONTAIN ANY SUBSTANCE APPEARING IN T
HE LISTINGS CONTAINED IN 40 CFR 261, "IDENTIFICATION AND LISTING OF HAZARDOUS
WASTE".
Handling And Storage Precautions: KEEP AWAY FROM CHILDREN. DO NOT GET IN EYES
OR ON SKIN OR CLOTHING. DO NOT TAKE INTERNALLY. KEEP CONTAINER CLOSED. AVOID
BREATHING VAPOR OR DUST. USE WITH ADEQUATE VENTILATION.
Other Precautions: PROTECT FROM FREEZING.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point: =62.8C, 145.F
Extinguishing Media: FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures: USE NIOSH APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT
(FP N).
Unusual Fire/Explosion Hazard: NONE KNOWN. RATINGS: HEALTH - 2; FLAMMABILITY -
2; REACTIVITY - 0.
=======================================================
Control Measures
=======================================================
Respiratory Protection: WEAR NIOSH APPROVED DUST MASK RESPIRATOR UNDER
APPROPRIATE OSHA STANDARDS AND REGULATIONS. A COMBINATION OF BOTH PROPER
VENTILATION AND NIOSH APPROVED RESPIRATORY PROTECTION WOULD TEND TO ELIMINATE
MO ST RISKS.
Ventilation: LOCAL EXHAUST IS RECOMMENDED.
Protective Gloves: IMPERVIOUS GLOVES (FP N).
Eye Protection: ANSI APPROVED CHEMICAL WORKERS GOGGLES (FP N).
Other Protective Equipment: ANSI APPROVED EYE WASH & DELUGE SHOWER (FP N). LONG
SLEEVE SHIRTS AND PANTS.
Work Hygienic Practices: WASH THOROUGHLY AFTER HANDLING. WASH HANDS WITH SOAP
AND WATER AFTER USING AND BEFORE EATING.
Supplemental Safety and Health: PHYSICAL DATA: VOC: COATING & MATERIAL -
0.14 LB/GAL.
=======================================================
Physical/Chemical Properties
=======================================================
Boiling Point: >223.9C, 435.F
B.P. Text: 435F - 560F
Vapor Density: LTR/AIR
Spec Gravity: 1.15 (H*2O=1)
VOC Pounds/Gallon: .14
Evaporation Rate & Reference: SLOWER THAN ETHER
Solubility in Water: INSOLUBLE
Appearance and Odor: CLEAR TO AMBER LIQUID; MILD AROMATIC ODOR.
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: KEEP FROM FREEZING.
Materials To Avoid: STRONG OXIDIZERS, STRONG ACIDS, STRONG BASES AND SELECTED
AMINES.
Hazardous Decomposition Products: PHENOLICS, CARBON MONOXIDE AND WATER.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
Transport Information: D.O.T.: NOT REGULATED - EXCEPTION: COMBUSTIBLE LIQUID,
N.O.S. (OVER 110 GALS IN SINGLE CONTAINER). PROPER SHIPPING NAME: NOT
REGULATED. HAZARD CLASS: NONE. UN/NA ID NUMBER: NONE.
=======================================================
Regulatory Information
=======================================================
Sara Title III Information: NO TOXIC CHEMICAL(S) SUBJECT TO THE REPORTING
REQUIREMENTS OF SECTION 313 OF TITLE III AND OF 40 CFR 372 ARE PRESENT. THIS
PRODUCT HAS BEEN REVIEWED I/A/W SECTION 311 (MSDS INVENTORY) AND SECTION 312
(TIER I/II INVENTORY) OF THE SUPERFUND AMENDMENT AND REAUTHORIZATION ACT OF
1986 (CFR 40 370.2) FOR "HAZARD CATEGORY" STATUS. UNDER APPLICABLE
DEFINITIONS, THIS PRODUCT MEETS THE FOLLOWING CATEGORIES: IMMEDIATE (ACUTE)
HEALTH HAZARD.
Federal Regulatory Information: TOXIC SUBSTANCES ACT (TSCA): THIS PRODUCT
AND/OR ALL THE INGREDIENTS CONTAINED IN THIS PRODUCT HAVE BEEN REGISTERED
UNDER THE TOXIC SUBSTANCES CONTROL ACT.
=======================================================
Other Information
=======================================================
Other Information: THE INFORMATION CONTAINED IN THIS MSDS IS BASED ON THE NEAT
OR CONCENTRATED PRODUCT AS SHIPPED. PERSONAL PROTECTION RECOMMENDATIONS
SHOULD BE REVIEWED BY THE PURCHASER. WORKPLACE CONDITIONS ARE IMPORT ANT
FACTORS IN SPECIFYING ADEQUATE PROTECTION.
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: 700 EPOXY RESIN,700000
Company: POLYSPEC MARINE PRODUCTS CORPORATION
Street: 6614 GANT RD
City: HOUSTON TX
Zipcode: 77066
Health Emergency Phone: 202-483-7616 (OUTSIDE U.S.)
Label Required IND: Y
Date Of Label Review: 04/25/2000
Status Code: A
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: WARNING
Respiratory Protection IND: YES
Health Hazard: Slight
Contact Hazard: Slight
Fire Hazard: Moderate
Reactivity Hazard: None
Hazard And Precautions: COMBUSTIBLE. ACUTE: INHALATION: VAPOR OR MIST MAY CAUSE
RESPIRATORY IRRITATION, DIZZINESS AND/OR NAUSEA. TIGHTNESS OF CHEST,
SHORTNESS OF BREATH, HEADACHE. SKIN AND EYE CONTACT: MAY CAUSE IRRITATION.
SKIN ABSORPTION: REPEATED OR PROLONGED CONTACT CAN CAUSE DEFATTING AND
IRRITATION. INGESTION: LOW TOXICITY.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.