DBA PRODUCTS COMPANY INC -- U221 URETHANE BALL PLUG HARDENER,160221-H
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BTKKS
MSDS NAME: U221 URETHANE BALL PLUG HARDENER,160221-H
Responsible Party
Name: DBA PRODUCTS COMPANY INC
Address: 22 SKOKIE HIGHWAY
City: LAKE BLUFF IL 60044
Info Phone: 708-234-8100
Emergency Phone Number: 800-255-3924
Preparer's Name: NONE
Proprietary Ind: Y
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: D B A PRODUCTS CO INC
Address: 22 SKOKIE HIGHWAY
City: LAKE BLUFF IL 60044-1711
Phone: 312-234-8100
Name: DBA PRODUCTS COMPANY, INC
Address: UNKNOWN
City: UNKNOWN NK 00000
Phone: UNKNOWN
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: ORAL LD50 (RAT) IS UNKNOWN.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: ACUTE: EYES: CAUSES IRRITATION AND BURNS. SKIN: CAUSES
BURNS, MAY BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS. INHALATION: HARMFUL IF
INHALED, INGESTION: MODERATELY TOXIC, HARMFUL IF SWALLOWED. CHRONIC: NONE
SPECIFIED BY MANUFACTURER.
Explanation Of Carcinogenicity: NONE
Signs And Symptions Of Overexposure: EYES: IRRITATION, BURNS. SKIN: IRRITATION,
BURNS, MAY BE ABSORBED THROUGH SKIN IN TOXIC AMOUNTS. INHALATION: BURNING
SENSATION, COUGHING, WHEEZING, LARYNGITIS, SHORTNESS OF BREATH, HEADACHE,
NAUSEA, V OMITING. INGESTION: MODERATELY TOXIC, HARMFUL IF SWALLOWED.
Medical Cond Aggravated By Exposure: NONE SPECIFIED BY MANUFACTURER.
First Aid: EYES: FLUSH WITH LARGE AMOUNTS OF WATER. GET MEDICAL ATTENTION.
SKIN: REMOVE CONTAMINATED CLOTHING. WASH AREA WITH SOAP AND WATER. GET
MEDICAL ATTENTION. INHALATION: MOVE TO FRESH AIR. IF NOT BREATHIN G, GIVE
CPR. IF DIFFICULT, GIVE OXYGEN.KEEP PERSON WARM AND QUIET. GET MEDICAL
ATTENTION. INGESTION: GIVE 2 GLASSES OF MILK OR 2 GLASSES OF WATER. DO NOT
INDUCE VOMITING. GET MEDICAL ATTENTION.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: WEAR PROTECTIVE EQUIPMENT. STOP SPILL AT SOURCE AND
DIKE SPILL TO PREVENT MATERIAL FROM SPREADING. PUMP LIQUID TO SALVAGE TANK.
RESIDUE MAY BE ABSORBED ON ABSORBENT AND SHOVELED INTO CONTAINERS. KEEP
MATERIAL FROM ENTERING SEWERS AND WATERWAYS.
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: INCINERATION IS RECOMMENDED DISPOSAL METHOD FOR ALL
CHEMICAL WASTES, ALTHOUGH MATERIAL MAY BE LANDFILLED IN ACCORDANCE WITH ALL
APPLICABLE REGULATIONS. THIS PRODUCT, IF DISPOSED OF, IS NOT CONSIDERED A
HAZARDOUS WASTE UNDER CURRENT RCRA REGULATIONS.
Handling And Storage Precautions: PRODUCT CAN BECOME UNSTABLE AT ELEVATED
TEMPERATURES AND PRESSURES. STORE IN COOL, DRY LOCATION. DO NOT TAKE
INTERNALLY.
Other Precautions: CLOSE CONTAINER AFTER EACH USE. EMPTY CONTAINERS MUST NOT BE
WASHED AND REUSED FOR ANY PURPOSE.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 234F,112C
Lower Limits: UNKNOWN
Upper Limits: UNKNOWN
Extinguishing Media: DRY CHEMICAL, WATER FOG. WATER/FOAM MAY CAUSE VIOLENT
FROTHING, IF SPRAYED INTO CONTAINER OF HOT, BURNING LIQUID.
Fire Fighting Procedures: FIREFIGHTERS SHOULD WEAR FULL PROTECTIVE CLOTHING AND
SELF CONTAINED BREATHING APPARATUS WITH FULL FACE SHIELD.
Unusual Fire/Explosion Hazard: WATER OR FOAM MAY CAUSE FROTHING WHICH CAN BE
VIOLENT, ESPECIALLY IF SPRAYED INTO CONTAINERS OF HOT, BURNING LIQUID.
=======================================================
Control Measures
=======================================================
Respiratory Protection: USE NIOSH/MSHA APPROVED POSITIVE PRESSURE AIR-SUPPLIED
RESPIRATOR, NIOSH SCHEDULE TC19C. REFER TO OSHA 29CFR 1910.134 "RESPIRATORY
PROTECTION".
Ventilation: MECHANICAL (GENERAL) VENTILATION PREFERRED.
Protective Gloves: IMPERVIOUS GLOVES
Eye Protection: CHEMICAL SPLASH GOGGLES OR FACE SHIELD.
Other Protective Equipment: IMPERVIOUS CLOTHING IS RECOMMENDED WHEN HANDLING
LIQUID MATERIAL. PROVIDE EMERGENCY EYE WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices: WASH AFTER HANDLING AND BEFORE EATING, DRINKING,
SMOKING AND AT END OF SHIFT.LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health: NONE.
=======================================================
Physical/Chemical Properties
=======================================================
HCC: C1
B.P. Text: 400F,204C
M.P/F.P Text: UNKNOWN
Decomp Text: UNKNOWN
Vapor Pres: UNKNOWN
Vapor Density: UNKNOWN
Spec Gravity: 1.03
Evaporation Rate & Reference: UNKNOWN
Solubility in Water: SOLUBLE
Appearance and Odor: YELLOW LIQUID OF MEDIUM VISCOSITY. AMINE ODOR.
Corrosion Rate: UNKNOWN
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: STABLE UNDER NORMAL CONDITIONS. AVOID HIGH
TEMPERATURE AND HIGH HUMIDITY.
Materials To Avoid: STRONG MINERAL ACIDS. PRODUCT CAN BECOME UNSTABLE AT
ELEVATED TEMPERATURES AND PRESSURES.
Hazardous Decomposition Products: MAY INCLUDE AMINES, NITROGEN COMPOUNDS,
CARBON MONOXIDE, CARBON DIOXIDE. THESE MAY BE A HEALTH HAZARD.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: WILL NOT OCCUR UNDER NORMAL CONDITIONS.
AVOID HIGH TEMPERATURE AND HIGH HUMIDITY.
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 9145
MSDS NAME: U221 URETHANE BALL PLUG HARDENER,160221-H
MSDS Prepared Date: 08/10/1993
Review Date: 05/31/1994
Tech Entry NOS Shipping Nm: CONTAINS ALIPHATIC AMINE
Net Unit Weight: UNKNOWN
Multiple KIT Number: 0
Review IND: Y
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: DWG
Symbols: G
DOT Proper Shipping Name: CORROSIVE LIQUIDS, N.O.S.
Hazard Class: 8
UN ID Num: UN1760
DOT Packaging Group: III
Label: CORROSIVE
Special Provision: T7
Non Bulk Pack: 203
Bulk Pack: 241
Max Qty Pass: 5 L
Max Qty Cargo: 60 L
Vessel Stow Req: A
Water/Ship/Other Req: 40
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: ESH
IMO Proper Shipping Name: CORROSIVE LIQUID, N.O.S. o
IMDG Page Number: 8147
UN Number: 1760
UN Hazard Class: 8
IMO Packaging Group: I/II/III
Subsidiary Risk Label: -
EMS Number: 8-15
MED First Aid Guide NUM: 760
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: HKW
IATA UN ID Num: 1760
IATA Proper Shipping Name: CORROSIVE LIQUID, N.O.S. *
IATA UN Class: 8
IATA Label: CORROSIVE
UN Packing Group: III
Packing Note Passenger: 818
Max Quant Pass: 5L
Max Quant Cargo: 60L
Packaging Note Cargo: 820
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: HKW
AFI Symbols: *
AFI Proper Shipping Name: CORROSIVE LIQUID, N.O.S.
AFI Hazard Class: 8
AFI UN ID NUM: UN1760
AFI Packing Group: III
Special Provisions: P5
Back Pack Reference: A12.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: U221 URETHANE BALL PLUG HARDENER,160221-H
Assigned IND: Y
Company: DBA PRODUCTS COMPANY, INC
Street: UNKNOWN
City: UNKNOWN NK
Zipcode: 00000
Health Emergency Phone: 800-255-3924
Label Required IND: Y
Date Of Label Review: 05/31/1994
Status Code: C
Label Date: 05/31/1994
Origination Code: F
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Severe
Fire Hazard: Slight
Reactivity Hazard: None
Hazard And Precautions: CAUSES IRRITATION AND BURNS TO EYES AND SKIN. MAY BE
ABSORBED THROUGH SKIN IN TOXIC AMOUNTS. HARMFUL IF INHALED OR INGESTION:
PRODUCT UNSTABLE AT HIGH TEMPERATURES AND PRESSURES. STORE IN COOL, DRY LO
CATION. KEEP SPILLS FROM ENTERING SEWERS AND WATERWAYS. FIRST AID: EYES:
FLUSH WITH WATER. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH AREA WITH SOAP AND WATER. GET MEDICAL ATTENTI ON. INHALATION: MOVE TO
FRESH AIR. SUPPORT BREATHING AS NECESSARY. GET MEDICAL ATTENTION. INGESTION:
GIVE 2 GLASSES OF MILK OR 2 GLASSES OF WATER. DO NOT INDUCE VOMITING. GET
MEDICAL ATTENTION. TARGET ORGANS: EYES, SKIN, RESPIRATORY SYSTEM, GI TRACT.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PERMATEX (R) HYDRAULIC JACK OIL, PN:78F
| 64742-53-6
64742-52-5
64742-65-0 |
|
PERMATEX (R) HYDRAULIC JACK OIL, PN:78N
| 64742-53-6
64742-52-5
64742-65-0 |
|
PRINT CARTRIDGES FOR HP DESKJET 1200C, PN:5164OC (CYAN)
| |
|
PRINT CARTRIDGES FOR HP DESKJET 1200C, PN:5164OM (MAGENTA)
| |
|
PRINT CARTRIDGES FOR HP DESKJET 1200C, PN:5164OY (YELLOW)
| |
|
QUICKTITE(TM) HIGH PERFORMANCE SUPER GLUE, PN:7652649
| 7085-85-0
9011-14-7
123-31-9 |
|
QUICKTITE(TM) HIGH PERFORMANCE SUPER GLUE, PN:82193
| 7085-85-0
9011-14-7
123-31-9 |
|
QUICKTITE(TM) HIGH PERFORMANCE SUPER GLUE, PN:21339
| 7085-85-0
9011-14-7
123-31-9 |
|
SPECIAL MIXTURE,HILL AIR FORCE BASE STANDARD III B
| 7697-37-2 |
|
SPECIAL MIXTURE,HILL AIR FORCE BASE STANDARD III A
| 7697-37-2 |
|
U221 URETHANE BALL PLUG HARDENER,160221-H
| |
|
RED DOT MONITORING ELECTRODE 2270,2270-1,2270-3,2270-5,2230
| |
|
51626A PRINT CARTRIDGES FOR DESKJET (PLAIN
| |
|
56557 UCON HEAT TRANSFER FLUID 50D
| |
|
MET-L-X DRY POWDER EXTINGUISHING AGENT,METLX 50,9320
| |
|
EP 921,FE 921
| |
|
EP 921,FE 921
| |
|
120511 LANE CLEANER AND POLISH #511
| |
|
3M BRAND DRY SILVER PAPERS TYPE SY1430
| 63148-65-2
1333-86-4
2489-05-6
112-85-6
9004-57-3
9004-35-7
7789-47-1 |
|
ASEPTIMZYME
| 9014-92-0
9014-01-1
7732-18-5
57-55-6 |
|
DOUBLE BUBBLE RED/WHITE;8173
| |
|
INK;DESKJET 500C,DESKWRITER C;51608A(PLAIN PAPER,BLACK)
| 111-46-6
616-45-5
7732-18-5 |
|
INK;THINKJET/QUIETJET/QUIETJET PLUS
| 7732-18-5
75-57-0
111-46-6
112-60-7
107-21-1 |
|
A-400, ACTIVATED ROSIN FLUX
| 67-63-0
8050-09-7 |
|
MUNOX GT
| |
|
112631-1 U-MANIFOLD
| |
|
LITH FLEX C NUMBER 1, 5330B260
| |
|
STYPOL 040-4817, M0404817B1
| |
|
B2396, XLD SUPREME MOTOR OIL SAE 15W40 API (SUPDAT)
| 64742-54-7 |
|
NALCLEAR 7766 FLOCCULANT
| |
|
RUFF NECK
| |
|
NPG-3 TONER BLACK, F41-7901-000
| |
|
NON-FERROUS BRASS & BRONZE, -/929
| 7440-50-8
7440-31-5
7439-92-1
7440-02-0 |
|
NON-FERROUS BRASS & BRONZE, 926/940
| 7440-50-8
7440-31-5
7439-92-1
7440-02-0 |
|
CRYSTALLINE SULFAMIC ACID
| 5329-14-6 |
|
-COTE (AEROSOL)
| |
|
WATER SEAL HOUSE AND TRIM STAIN
| |
|
5306 COIL CLEANER (AERO)
| 111-76-2 |
|
ENCO BLUE LAYOUT FLUID AEROSOL, L-07283
| 67-63-0
110-19-0
763-69-9
108-88-3
1330-20-7
64-17-5
67-64-1
74-98-6 |
|
SYSMEX STROMATOLYSER-3WP, SR-22
| |
|
SYSMEX STROMATOLYSER-3WP, SR-200A
| |
|
HI-SOLIDS POLYURETHANE, B60V30
| |
|
SUPER BLAST OFF, SB-1, 55 GALLON DRUM
| |
|
SUPER BLAST OFF, SB-2, 5 GALLON PAIL
| |
|
SUPER BLAST OFF, SB-3, 6/1 GAL CASE
| |
|
SAFE-FR 1036
| |
|
SAFE-FR 595-1
| |
|
11590
| |
|
NITROSAMINES MIXTURE, US-113
| 62-75-9
86-30-6
621-64-7
10595-95-6
59-89-2
100-75-4
930-55-2
75-09-2
924-16-3
55-18-5 |
|
INTERNAL STANDARD MIXTURE, STM-341
| 67-56-1
3114-55-4
540-36-3
3855-82-1
363-72-4 |
|
|