LENMAR, INC -- Y-850 MIL-P-23377F, PRIMER COATINGS, COMP B
=======================================================
Material Safety Data Sheet
=======================================================
NIIN: 01-316-2552
MSDS Num: BVGSQ
MSDS NAME: Y-850 MIL-P-23377F, PRIMER COATINGS, COMP B
Kit Part: Y
Responsible Party
Name: LENMAR, INC
Address: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD 21223
Info Phone: 401-947-2300
Emergency Phone Number: 401-358-5524 NIGHT/401-947-2300 DAY
Review Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: LENMAR, INC.
Address: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD 21223
Phone: 410-947-2300/410-358-5524
Name: LENMAR, INC
Address: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD 21223
Phone: (301) 947-2300
=======================================================
Item Description Information
=======================================================
Item Name: EPOXY PRIMER COATING KIT
Specification Number: MIL-P-23377F
Type/Grade/Class: TYPE 1; CLASS 2
Type of Container: METAL
=======================================================
Ingredients
=======================================================
Cas: 108-88-3
RTECS #: XS5250000
Name: TOLUENE (METHYLBENZENE) (SARA III) (VAPOR PRESSURE 22 MM HG @ 20C)
% Wt: 35-45
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: 100 PPM
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 1330-20-7
RTECS #: ZE2100000
Name: XYLENE (DIMETHYLBENZENE) (SARA III) (VAPOR PRESSURE 10 MM HG @ 20C)
% Wt: 26-36
Other REC Limits: NONE RECOMMENDED
OSHA PEL: 100 PPM
ACGIH TLV: 100 PPM
EPA Rpt Qty: 1000 LBS
DOT Rpt Qty: 1000 LBS
------------------------------
Cas: 71-36-3
RTECS #: EO1400000
Name: N-BUTANOL (1-BUTANOL) (VAPOR PRESSURE 5.5 MM HG @ 20C)
% Wt: 5-15
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: 50 PPM
EPA Rpt Qty: 5000 LBS
DOT Rpt Qty: 5000 LBS
------------------------------
Cas: 68410-23-1
Name: POLYAMIDE RESIN
% Wt: 14-24
Other REC Limits: NONE RECOMMENDED
OSHA PEL: NOT ESTABLISHED
ACGIH TLV: NOT ESTABLISHED
=======================================================
Health Hazards Data
=======================================================
Route Of Entry Inds - Inhalation: YES
Skin: YES
Effects of Exposure: INHAL: ANESTHETIC, RESPIRATORY TRACT IRRITATION OR ACUTE
NERVOUS SYSTEM DEPRESSION (HEADACHE, DIZZINESS, STAGGERING, CONFUSION,
UNCONSCIOUSNESS, COMA). SKIN OR EYE: PRIMARY IRRITANT. REPORTS ASSOCIATE
REPEATED/PROLONGED EXPOSURE W/PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
CONCENTRATING & INHALING PRODUCT-HARMFUL/FATAL.
Signs And Symptions Of Overexposure: NOTE TO PHYSICIAN: IF MORE THAN 2.0 ML/KG
HAS BEEN INGESTED & VOMITING HAS NOT OCCURRED, IMPLEMENT EMESIS
W/SUPERVISION. KEEP VICTIM'S HEAD BELOW HIPS TO PREVENT ASPIRATION. IF
SYMPTOMS SUCH AS LOSS O F GAG REFLEX, CONVULSIONS OR UNCONSCIOUSNESS BEFORE
EMESIS, CONSIDER GASTRIC LAVAGE USING A CUFFED ENDOTRACHAEL TUBE.
Medical Cond Aggravated By Exposure: NONE KNOWN
First Aid: INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF BREATHING DIFFICULT.
CALL DR. EYES: FLUSH IMMEDIATELY W/RUNNING WATER FOR AT LEAST 15 MINUTES. SEE
DR FOR DEFINITIVE MED TREATMENT. SKIN: WASH PROMPTLY W/WATER. REMOVE
CONTAMINATED CLOTHING &LAUNDER BEFORE REUSE. CONSULT DR. INGESTION: CALL
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. IF CONSCIOUS GIVE 1-2 GLASSES
WATER. DON'T INDUCE VOMITING.
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: REMOVE IGNITION SOURCES. MOP UP SPILLS/ADD ABSORBENT.
USE NON-SPARK TOOLS. USE ADEQUATE VENT. MOVE LEAKING CONTAINERS OUTDOORS,
OBSERVING PRECAUTION W/REGARD TO FIRE, SPARK, FLAME HZD. RUNOFF TO WATER WAY
CREATES FIRE HZD. NOTIFY FIRE & HLTH AGENCIES.
Waste Disposal Methods: RECLAIM MATEIAL, INCINERATE OR USE SANITARY LANDFILL
METHOD OF DISPOSAL, IN ACCORDANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
DO NOT INCINERATE CLOSED CONTAINERS. SEAL DRUMS TIGHTLY.
Handling And Storage Precautions: STORE IN VENTED WAREHOUSE.KEEP OUT OF DIRECT
SUNLIGHT/OTHER HEAT SOURCE.KEEP CNTNR CLSD.NO SMOKING.DON'T
EAT(HARMFUL/FATAL).GROUND CNTNR WHEN POURING.
Other Precautions: AVOID FREE FALL OF LIQ >FEW INCHES. CLOSE CNTNR AFTER
USE. DON'T TRANSFER TO BOTTLES OR UNLABELED CNTNRS.AVOID CONTACT W/SKIN &
BREATHING VAPORS.EXTINGUISH PILOT LIGHTS.USE NON-SPARK TOOLS & EXPLOSION
PROOF EQUIP. KEEP FROM HEAT, SPARK, *
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: SCC
Flash Point Text: 53.0F,11.7C
Lower Limits: 1.0
Extinguishing Media: FOAM, ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER
FOG
Fire Fighting Procedures: WATER MAY BE INEFFECTIVE, USE TO COOL FIRE EXPOSED
CLSD CNTNRS.AVOID EXPOSURE TO FUMES;GET IMMED MED AID FOR PERSON EXPOSED.
WEAR SCBA WHEN IN ENCLOSED AREAS.
Unusual Fire/Explosion Hazard: TOXIC GAS EVOLVED. KEEP CNTNRS CLSD. KEEP FROM
HEAT/IGNIT SOURCES. CLSD CNTNR MAY EXPLODE W/HEAT. DON'T APPLY TO HOT SRFCS.
DON'T STORE/MIX W/STRONG OXIDANTS.
=======================================================
Control Measures
=======================================================
Respiratory Protection: IN OPEN AREAS, USE MECHAN FILTER. IN RESTRICTED VENT
AREA, USE CHEM/MECHAN FILTER. IN CONFINED AREAS, USE AIRLINE-TYPE RESPRTRS OR
HOODS. WEAR FITTED RESPIRATOR DURING & AFTER APPLICATION UNLESS AIR M
ONITORING SHOWS VAPOR BELOW TLV/PEL.
Ventilation: USE SPRAY BOOTH. GENERAL DILUTION OR LOCAL EXHAUST TO KEEP
CONCENTRATION OF MOST HAZARDOUS INGREDIENT BELOW TLV.
Protective Gloves: REQUIRED FOR PROLONGED/REPEATED CONTACT
Eye Protection: SPLASH PROOF GOGGLES
Other Protective Equipment: NONE REQUIRED
Work Hygienic Practices: NONE REQUIRED
Supplemental Safety and Health: * PRECAUTIONS CONT'D: & OPEN FLAME. DO NOT
APPLY TO HOT SURFACES. USE W/ADEQUATE VENTILATION. HANDLE IN ACCORD
W/POTENTIALITIES OF BOTH RESIN COMPONENT & CURING AGENT WHEN MIXED. EMPTY
CONTAINER RETAI N RESIDUE-DANGEROUS. DON'T
PRESSURIZE,CUT,WELD,BRAZE,SOLDER,DRILL,ETC. DONT ATTEMPT TO CLEAN. FOR TANKER
SEE ANSI Z49.1
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: 231 TO 281F
Vapor Density: > AIR
Evaporation Rate & Reference: SLOWER THAN ETHER
Percent Volatiles by Volume: 83
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: TEMPERATURES IN EXCESS OF 150F IN CLOSED
CONTAINER. EXPOSURE TO HEAT, SPARKS, OPEN FLAMES AND HOT SURFACES.
Materials To Avoid: OXIDIZING AGENTS
Hazardous Decomposition Products: CARBON DIOXIDE, CARBON MONOXIDE.
Hazardous Polymerization Indicator: NO
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
Transportation Information
=======================================================
Trans ID NO: 124767
MSDS NAME: Y-850 MIL-P-23377F, PRIMER COATINGS, COMP B
MSDS Prepared Date: 07/30/1993
Review Date: 08/30/1994
Multiple KIT Number: 0
Kit Part IND: Y
Review IND: Y
Type Of Container: METAL
=======================================================
Detail DOT Information
=======================================================
DOT PSN Code: LFD
DOT Proper Shipping Name: PAINT
DOT PSN Modifier: INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER, AND LIQUID LACQUER BASE
Hazard Class: 3
UN ID Num: UN1263
DOT Packaging Group: II
Label: FLAMMABLE LIQUID
Special Provision: B52,T7,T30
Packaging Exception: 150
Non Bulk Pack: 173
Bulk Pack: 242
Max Qty Pass: 5 L
Max Qty Cargo: 60 L
Vessel Stow Req: B
=======================================================
Detail IMO Information
=======================================================
IMO PSN Code: LCP
IMO Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
IMO PSN Modifier: (INCLUDING PAINT, LACQUER, ENAMEL, STAIN, SHELLAC SOLUTIONS,
VARNISH, POLISH, LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING PAINT
THINNING OR REDUCING COMPOUND) o
IMDG Page Number: 3268
UN Number: 1263
UN Hazard Class: 3.2
IMO Packaging Group: I/II *
Subsidiary Risk Label: -
EMS Number: 3-05
MED First Aid Guide NUM: 310
=======================================================
Detail IATA Information
=======================================================
IATA PSN Code: SXI
IATA UN ID Num: 1263
IATA Proper Shipping Name: PAINT
IATA PSN Modifier: (INCLUDING
PAINT,LACQUER,ENAMEL,STAIN,SHELLAC,VARNISH,POLISH,LIQUID FILLER AND LIQUID
LACQUER BASE)
IATA UN Class: 3
IATA Label: FLAMMABLE LIQUID
UN Packing Group: II
Packing Note Passenger: 305
Max Quant Pass: 5L
Max Quant Cargo: 60L
Packaging Note Cargo: 307
Exceptions: A7,A72
=======================================================
Detail AFI Information
=======================================================
AFI PSN Code: SXI
AFI Proper Shipping Name: PAINT OR PAINT RELATED MATERIAL
AFI PSN Modifier: (INCLUDING PAINT,LACQUER,ENAMEL,STAIN,SHELLAC
SOLUTIONS,VARNISH,POLISH,LIQUID FILLER AND LIQUID LACQUER BASE) OR (INCLUDING
PAINT THINNING OR REDUCING COMPOUNDS)
AFI Hazard Class: 3
AFI UN ID NUM: UN1263
AFI Packing Group: II
Special Provisions: P5
Back Pack Reference: A7.3
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: Y-850 MIL-P-23377F, PRIMER COATINGS, COMP B
Company: LENMAR, INC
Street: 150 SOUTH CALVERTON ROAD
City: BALTIMORE MD
Zipcode: 21223
Health Emergency Phone: 401-358-5524 NIGHT/401-947-2300 DAY
Label Required IND: Y
Date Of Label Review: 12/16/1998
Status Code: C
Label Date: 12/16/1998
Origination Code: G
Hazard And Precautions: INHAL: ANESTHETIC, RESPIRATORY TRACT IRRITATION OR
ACUTE NERVOUS SYSTEM DEPRESSION (HEADACHE, DIZZINESS, STAGGERING, CONFUSION,
UNCONSCIOUSNESS, COMA). SKIN OR EYE: PRIMARY IRRITANT. REPORTS ASSOCIATE
REPEATED/PROLONGED EXPOSURE W/PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
CONCENTRATING & INHALING PRODUCT-HARMFUL/FATAL. NOTE TO PHYSICIAN: IF
MORE THAN 2.0 ML/KG HAS BEEN INGESTED & VOMITING HAS NOT O CCURRED,
IMPLEMENT EMESIS W/SUPERVISION. KEEP VICTIM'S HEAD BELOW HIPS TO PREVENT
ASPIRATION. IF SYMPTOMS SUCH AS LOSS OF GAG REFLEX, CONVULSIONS OR
UNCONSCIOUSNESS BEFORE EMESIS, CONSIDER GASTRIC LAV AGE USING A CUFFED
ENDOTRACHAEL TUBE.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|