CAMIE CAMPBELL -- A1000 DRY LUBRICANT RELEASE AGENT RELEASE FCR
=======================================================
Material Safety Data Sheet
=======================================================
MSDS Num: BWGTZ
MSDS NAME: A1000 DRY LUBRICANT RELEASE AGENT RELEASE FCR1000
Responsible Party
Name: CAMIE CAMPBELL
Address: 9225 WATSON INDUSTRIAL PK
City: ST LOUIS MO 63126
Info Phone: 314-968-3222
Emergency Phone Number: 800-424-9300 (CHEMTREC)
Preparer's Name: JLM
Proprietary Ind: Y
Published: Y
=======================================================
Contractor Summary
=======================================================
Name: CAMIE CAMPBELL
Address: 9225 WATSON INDUSTRIAL PARK
City: ST LOUIS MO 63126
Phone: 314-968-3222
Name: CAMIE CAMPBELL
Address: 9225 WATSON INDUSTRIAL PK
City: ST. LOUIS MO 63126
Phone: 314-968-3222
=======================================================
Ingredients
=======================================================
Name: *** PROPRIETARY ***
-----------------------------
=======================================================
Health Hazards Data
=======================================================
LD50 LC50 Mixture: NONE SPECIFIED BY MANUFACTURER.
Route Of Entry Inds - Inhalation: YES
Skin: YES
Ingestion: NO
Carcinogenicity Inds - NTP: NO
IARC: NO
OSHA: NO
Effects of Exposure: EYE CONTACT: CAN CAUSE SEVERE IRRITATION, REDNESS,
TEARING, BLURRED VISION. SKIN CONTACT: PROLONGED OR REPEATED CONTACT CAN
CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS. INHALATION: EXCESSIVE INHA
LATION OF VAPORS CAN CAUSE NASAL AND RESPIRATORY IRRITATION, DIZZINESS,
WEAKNESS, FATIGUE, NAUSEA, (EFTS OF OVEREXP)
Explanation Of Carcinogenicity: NOT RELEVANT
Signs And Symptions Of Overexposure: HLTH HAZ: HEADACHE, POSSIBLE
UNCONSCIOUSNESS AND EVEN ASPHYXIATION. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING AND INHALING THIS PRODUCT MAY BE HARMFUL OR FATAL. WARNING:
SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER: FORMALDEHYDE IS
PRESENT BELOW 0.1%.
Medical Cond Aggravated By Exposure: NONE KNOWN.
First Aid: SKIN:THORO WASH EXPOS AREA W/SOAP & WATER. REMOVE CONTAMD CLTHG.
LAUNDER CONTAMD CLTHG BEFORE REUSE. GET MED ATTN IF IRRIT PERSISTS.
EYES:FLUSH W/LG AMTS OF WATER. LIFT UPPER & LOWER LIDS OCCAS. GET M ED
ATTN. INGEST:DO NOT INDUCE VOMIT. GIVE 2 GLASSES OF WATER IF CONSCIOUS. NEVER
GIVE ANYTHING BY MOUTH TO UNCON PERSON. GET IMMED MED ATTN. INHAL:REMOVE TO
FRESH AIR. IF BRTHG IS DFCLT ADMIN (SUPDAT)
=======================================================
Handling and Disposal
=======================================================
Spill Release Procedures: ELIM SOURCES OF IGNIT & VENT AREA. PERSONS NOT
PROPERLY EQUIPPED SHOULD BE EXCLUDED FROM AREA. STOP SPILL AT SOURCE. PVNT
SPREADING. AVOID INHAL OF VAPS. AVOID SKIN CNTCT W/LIQ. SOAK UP ON ABSORB
MATL & PLACE INTO CNTNR FOR DISP. USE PLASTIC
Neutralizing Agent: NONE SPECIFIED BY MANUFACTURER.
Waste Disposal Methods: DISPOSE OF IN ACCORDANCE WITH ALL LOCAL, STATE AND
FEDERAL REGULATIONS.
Handling And Storage Precautions: RECOM MATL BE STORED IN COOL, DRY, VENT AREA.
KEEP AWAY FROM HEAT SOURCES, OPEN FLAME, SPARKS. DO NOT STORE ABOVE 120F. DO
NOT STORE IN DIRECT
Other Precautions: CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN EMPTIED
SINCE CONTAINERS RETAIN PRODUCT RESIDUES (VAPOR, LIQUID &/OR SOLID). ALL
HAZARDOUS PRECAUTIONS GIVEN MUST BE OBSERVED. DO NOT FLAME CUT, BRAZE OR USE
WELDING TORCH.
=======================================================
Fire and Explosion Hazard Information
=======================================================
Flash Point Method: PMCC
Flash Point Text: -156F,-104C
Lower Limits: 1.6%
Upper Limits: 17.6%
Extinguishing Media: MEDIA SUITABLE FOR SURROUNDING FIRE (FP N).
Fire Fighting Procedures: USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT (FP N).
Unusual Fire/Explosion Hazard: ALL 5 GAL PAILS & LARGER SHOULD BE GROUNDED
&/OR BONDED DURING MATL TRANSFERRAL. FOR AEROSOL PRODS, EXPOS TO TEMPS
OVER 130F MAY CAUSE CNTNRS TO BURST, (SUPDAT)
=======================================================
Control Measures
=======================================================
Respiratory Protection: IF WORKPLACE EXPOS LIMITS OF PROD/ANY COMPONENT IS
EXCEEDED, NIOSH/MSHA APPRVD AIR SUPPLIED RESP IS ADVISED IN ABSENCE OF PROPER
ENVIRON CONTROL. OSHA REGS ALSO PERMIT OTHER NIOSH/MSHA APPRVD RESPS (N EG
PRESS TYPE) UNDER SPECIFIED
Ventilation: PROVIDE SUFFICIENT MECHANICAL VENTILATION (GENERAL AND/OR LOCAL
EXHAUST) TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves: RESISTANT SUCH AS PVC/NITRILE, NEOPRENE.
Eye Protection: ANSI APPRVD CHEM WORKERS GOGGLES (FP N).
Other Protective Equipment: TO PREVENT REPEATED OR PROLONGED SKIN CONTACT, WEAR
IMPERVIOUS CLOTHING AND BOOTS. EYEWASH FNTN & DELUGE SHWR (FP N).
Work Hygienic Practices: WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY. REMOVE AND LAUNDER CLOTHING.
Supplemental Safety and Health: USERS OF "L" VERSION OF SHOULD CONSULT "LR"
VERSION FOR ADDNL INFO(FP N). EXPLO HAZ:RELS HIGHLY FLAMM GAS. MATLS TO
AVOID:OXIDIZERS HEATING >484F WILL CAUSE EVOLUTION OF TOX FUMES. DECOMP
PRODS M AY IGNITE AT TEMPS >1300F. FIRST AID PROC:OXYGEN. GIVE ARTF RESP
IF BRTHG HAS STOPPED. KEEP WARM, QUIET. GET MED ATTN.
=======================================================
Physical/Chemical Properties
=======================================================
B.P. Text: >-109F,>-78
Vapor Pres: SEE INGS
Vapor Density: HVR/AIR
Spec Gravity: 0.671 (FP N)
Evaporation Rate & Reference: FASTER/BUTYL ACETATE
Solubility in Water: MISCIBLE
Appearance and Odor: OPAQUE LIQUID; SLIGHT ALCOHOL ODOR.
Percent Volatiles by Volume: 99.6
=======================================================
Reactivity Data
=======================================================
Stability Indicator: YES
Stability Condition To Avoid: HEAT, SPARKS, WELDING ARCS, OPEN FLAME AND STATIC
ELECTRICITY.
Materials To Avoid: OXIDIZING AGENTS, ACIDS, CAUSTICS, AMINES, ALKANOLAMINES,
ALDEHYDES, AMMONIA, CHLORINATED COMPOUNDS, STRONG (SUPDAT)
Hazardous Decomposition Products: METHANOL, CARBON MONOXIDE AND CARBON DIOXIDE,
FORMALDEHYDE.
Hazardous Polymerization Indicator: NO
Conditions To Avoid Polymerization: NOT RELEVANT
=======================================================
Toxicological Information
=======================================================
=======================================================
Ecological Information
=======================================================
=======================================================
MSDS Transport Information
=======================================================
=======================================================
Regulatory Information
=======================================================
=======================================================
Other Information
=======================================================
=======================================================
HAZCOM Label
=======================================================
MSDS NAME: A1000 DRY LUBRICANT RELEASE AGENT RELEASE FCR1000
Company: CAMIE CAMPBELL
Street: 9225 WATSON INDUSTRIAL PARK
City: ST LOUIS MO
Zipcode: 63126
Health Emergency Phone: 800-424-9300 (CHEMTREC)
Label Required IND: Y
Date Of Label Review: 01/24/1995
Status Code: C
Label Date: 01/24/1995
Origination Code: G
Eye Protection IND: YES
Skin Protection IND: YES
Signal Word: DANGER
Respiratory Protection IND: YES
Health Hazard: Moderate
Contact Hazard: Moderate
Fire Hazard: Severe
Reactivity Hazard: None
Hazard And Precautions: FLAMMABLE. ACUTE: EYE CONTACT: CAN CAUSE SEVERE
IRRITATION, REDNESS, TEARING, BLURRED VISION. SKIN CONTACT: PROLONGED OR
REPEATED CONTACT CAN CAUSE MODERATE IRRITATION, DEFATTING, DERMATITIS.
INHALATI ON: EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL AND RESPIRATORY
IRRITATION, DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHE, POSSIBLE
UNCONSCIOUSNESS AND EVEN ASPHYXIATION. INTENTIONAL MISUSE MAY BE
HARMFUL/FATAL. CHRONIC: NONE LISTED BY MANUFACTURER.
=======================================================
Disclaimer (provided with this information by the compiling agencies): This
information is formulated for use by elements of the Department of Defense.
The United States of America in no manner whatsoever expressly or implied
warrants, states, or intends said information to have any application, use or
viability by or to any person or persons outside the Department of Defense
nor any person or persons contracting with any instrumentality of the United
States of America and disclaims all liability for such use. Any person
utilizing this instruction who is not a military or civilian employee of the
United States of America should seek competent professional advice to verify
and assume responsibility for the suitability of this information to their
particular situation regardless of similarity to a corresponding Department
of Defense or other government situation.
*** END OF RECORD *** |
|
|