===================== Product Identification =====================
MSDS NAME:F1083 LIGHT OAK LACQUER STAIN
NIIN:00F015064
MSDS Number: BKCMH
=== Responsible Party ===
Company:DEL PAINT MFG
Address:3105 E. RENO
City:OKLAHOMA CITY
State:OK
ZIP:73117
Info Phone Num:(405) 672-1431
Emergency Phone Num:(405) 672-1431
CAGE:39934
=== Contractor Identification ===
Company:DEL PAINT MFG
Address:3105 EAST RENO
Box:City:OKLAHOMA CITY
State:OK
ZIP:73117
Country:US
Phone:405-672-1431
CAGE:39934
============= Composition/Information on Ingredients =============
Name:ACETONE (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 6.27%
Other REC Limits:590 MG/CUM
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:2-BUTOXYETHANOL
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: 33.17%
Other REC Limits:25 PPM (SKIN)
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: 0.79%
Other REC Limits:400 PPM
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192
Name:ETHYLTOLUENE
CAS:611-14-3
RTECS #:XT2500000
Fraction by Wt: 1.98%
Name:PETROLEUM DISTILLATE, PETROLEUM OIL, BASE OIL
AROMATIC PETROLEUM SOLVENT
CAS:8002-05-9
RTECS #:SE7175000
Fraction by Wt: 29.44%
Other REC Limits:10 MG/CUM STEL
OSHA PEL:5 MG/CUM MIST
ACGIH TLV:5 MG/CUM MIST
Name:LIGHT ALIPHATIC NAPHTHA, VM & P NAPHTHA
CAS:64742-89-8
Fraction by Wt: 21.34%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: INTOXICATING, NARCOTIC,
IRRITATION TO THE MUCOUS MEMBRANES OF THE LUNGS, LABORED BREATHING,
DULLNESS & DROWSINESS. INGESTION: ABDOMINAL PAIN & NAUSEA.
SKIN/EYE: REDNESS & PAIN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: INTOXICATING & NARCOTIC.
INHALATION: IRRITATION TO THE MUCOUS MEMBRANES OF THE LUNG, LABORED
BREATHING, DULLNESS & DROWSINESS. INGESTION: ABDOMINAL PAIN &
NAUSEA. SKIN/EYE: REDNESS & PAIN.
Medical Cond Aggravated by Exposure:RESPIRATORY SYSTEM DISEASES
======================= First Aid Measures =======================
First Aid:SKIN: RINSE OR SHOWER W/PLENTY OF WATER. EYE: RINSE W/COPIOUS
AMOUNTS OF WATER. INHALATION: REMOVE TO FRESH AIR. GIVE ARTIFICAL
RESPIRATION IF NECESSARY. INGESTION: RINSE MOUTH & DRINK PLENTY OF
WATER . DON'T INDUCE VOMITING. OBTAIN MEDICALATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:-4F
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS W/A FULL
FACEPIECE OPERATED IN PRESSURE-DEMAND OR OTHER POSITIVE MODE.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR/MAY TRAVEL ALONG THE
GROUND OR MAY BE MOVED BY VENTILATION & IGNITED BY PILOT LIGHTS,
OTHER FLAMES, SPARKS, HEATERS, OR OTHER IGNITION SOURCES
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB LIQUID ON PAPER. VERMICULITE, FLOOR
ABSORBENT, OR OTHER ABSORBENT MATERIAL & TRANSFER TO HOOD.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A CLEAN DRY AREA. KEEP AWAY
FROM FOOD PRODUCTS.
Other Precautions:AVOID CONTACT W/SKIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF TLV OF THE PRODUCT OR ANY COMPONENT IS
EXCEEDED, NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED RESPIRATORY IS
ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL. ENGINEERING OR
ADMINISTRATIVE CONTROLS S HOULD BE IMPLEMENTED TO REDUCE EXPOSURE.
Ventilation:PROVIDE SUFFICIENT MECHANICAL/LOCAL EXHAUST VENTILATION TO
KEEP
Protective Gloves:RESISTANT SUCH AS BUNA-N
Eye Protection:SPLASH GOGGLES, SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Work Hygienic Practices:WASH HANDS & FACE BEFORE EATING. REMOVE
CONTAMINATED CLOTHING.
Supplemental Safety and Health
WT/GAL: 7.30 LBS.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:133-336F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:96.8%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:PILOT LIGHTS, OPEN FLAMES, SPARKS, HOT
SURFACES, IGNITION SOURCES, HEATERS, SMOKING, ELECTRIC MOTORS,
STATIC DISCHARGE.
Hazardous Decomposition Products:CO, WATER
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL OF WASTE MATERIAL MUST COMPLY
W/FEDERAL, STATE & LOCAL REGULATION. IF APPROVED, IT MAY BE REMOVED
TO A LICENSED LANDFILL. FLAMMABLE LIQUID
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TEAM 89 PENETRATING OIL-NUT BUSTER
| 71-55-6
75-09-2 |
|
2072 TANDY ANTIQUE LEATHER STAIN MEDIUM BROWN
| |
|
2072 TANDY ANTIQUE LEATHER STAIN TAN
| |
|
2072 TANDY ANTIQUE LEATHER STAIN MAHOGONY
| |
|
2072 TANDY ANTIQUE LEATHER STAIN SADDLE TAN
| |
|
1.1-5 GASKET SEALANT TYPE I
| 67-63-0
1332-58-7 |
|
MB92 MAGNESIUM SILICATE, TALC
| 1480-96-6 |
|
2636 MAGNESIUM SILICATE, TALC
| 1480-96-6 |
|
9100 CHANNEL MASTER CONTACT SHIELD
| 75-69-4
75-71-8 |
|
9101 CHANNEL MASTER CONTACT SHIELD
| 75-71-8
75-69-4 |
|
3080 DRY IMAGER, 6R209
| 39382-25-7
1333-86-4
7631-86-9
25086-15-1 |
|
1025/1038/2510 BLACK TONER, 6R121
| 25213-39-2
9003-01-4
1333-86-4
112945-52-5 |
|
1025/1038/2510 BLACK TONER, 6R122
| 112945-52-5
25213-39-2
9003-01-4
1333-86-4 |
|
1025/1038/2510 BLACK TONER, 6R133
| 25213-39-2
9003-01-4
1333-86-4
112945-52-5 |
|
1025/1038/2510 BLACK TONER, 6R234
| 25213-39-2
9003-01-4
1333-86-4
112945-52-5 |
|
1025/1038/2510 BLACK TONER, 6R500
| 25213-39-2
9003-01-4
1333-86-4
112945-52-5 |
|
1025/1038/2510 BLACK TONER, 6R90099(RX)
| 1333-86-4
112945-52-5
25213-39-2
9003-01-4 |
|
MERCON ATF
| 64742-65-0 |
|
48-7549-0 CONVENIENCE DEVELOPER
| 7732-18-5
10117-38-1
497-19-8
123-31-9 |
|
UCAR AIRCRAFT DEICING FLUID 2-D, PM-6435
| 107-21-1
111-46-6
123-91-1
67-56-1 |
|
COMBAT BORON NITRIDE COATING TYPE S
| 10043-11-5
1344-28-1 |
|
955 POLY ELPH, 11-575
| 1310-58-3
7631-95-0 |
|
702 DEARCIDE, 14-120
| 7786-30-3
7732-18-5
10377-60-3
26172-55-4
2682-20-4 |
|
10-019 DEARBORN 19
| 1310-58-3 |
|
134 DEARSOL, 30-300
| 7647-01-0 |
|
GRAY IRON CASTING
| 7440-44-0
7440-21-3
7439-96-5
7440-02-0
7440-47-3
18540-29-9
7439-98-7
7704-34-9
7723-14-0
7429-90-5
7440-32-6
7440-50-8
7439-89-6 |
|
MB-318
| 137-41-7 |
|
CW-7000D
| 7732-18-5
123-91-1
62-75-9
2809-21-4 |
|
7384 AEROSOL SPRAY ORTHO-COAT CLEAR PAINT
| 1330-20-7
108-88-3 |
|
CELLULOSE ACETATE BUTYRATE HOT DIP
| 9004-36-8 |
|
HOBART 16, AWS E-7016 1/8" MILD STEEL CORE WIRE
| 13463-67-7
16984-48-8 |
|
INCO NICKEL POWDER TYPE 123
| 7440-02-0
1313-99-1
12167-08-7 |
|
F1083 LIGHT OAK LACQUER STAIN
| 67-64-1
111-76-2
67-63-0
611-14-3
8002-05-9
64742-89-8 |
|
WW-1 TIRE WHITEWALL CLEANER
| 1310-73-2
111-76-2 |
|
WW-2 TIRE WHITEWALL CLEANER
| 1310-73-2
111-76-2 |
|
WW-3 TIRE WHITEWALL CLEANER
| 1310-73-2
111-76-2 |
|
WW-5 TIRE WHITEWALL CLEANER
| 1310-73-2
111-76-2 |
|
TEAM 140 SAND & SALT REMOVER
| |
|
621937 TIRE CEMENT
| 71-55-6
136-23-2
111-92-2 |
|
TEAM 92 ENGINE STARTER
| 60-29-7
142-82-5
124-38-9 |
|
TEAM 9 CRACK FILLER
| |
|
350 SIKADUR 35 HI MOD LV
| |
|
350 SIKADUR 35 HI MOD LV
| 1317-65-3
112945-52-5
13463-67-7 |
|
5018/5028/5034 BLACK DRY INK/BLACK TONER/COPY CARTRIDGE
| 9003-55-8
7439-89-6
1309-37-1
8050-09-7
1333-86-4
3843-16-1 |
|
5R162, 3080 DEVELOPER
| 66402-68-4
39382-25-7
1333-86-4
7631-86-9
25086-15-1 |
|
22756 TPTZ IRON REAGENT POWDER PILLOWS
| 7772-98-7
18996-35-5
3682-35-7
7775-14-6
7681-57-4 |
|
ELMER'S SUPERFAST EPOXY, PART 1 RESIN COMPOUND
| 112945-52-5
25068-38-6 |
|
ELMERS SUPERFAST EPOXY, PART 2 HARDENER COMPOUND
| 112945-52-5 |
|
T0003 STANDARD REDUCER FOR SPRAY APPLIED URETHANE TOPCOATS
| 111-15-9
141-78-6
108-88-3 |
|
G3010 TOPCOAT CONVERTER FOR SPRAY APPLICATION
| 1330-20-7
141-78-6
108-88-3
111-15-9
28182-81-2 |
|
|