===================== Product Identification =====================
MSDS NAME:LACQUER ACRYLIC N.C. CAM OLIVE DRAB 34088
NIIN:00-941-8711
MSDS Number: BKJSC
=== Responsible Party ===
Company:PRATT AND LAMBERT INC, INDUSTRIAL COATINGS INC.
Box:2153
City:WICHITA
State:KS
ZIP:67201
Country:US
Info Phone Num:316-733-1361
Emergency Phone Num:716-873-6000/800-255-3924 DOT EMERG
Preparer's Name:W. A. ELLISON
CAGE:61196
=== Contractor Identification ===
Company:PRATT AND LAMBERT INC
Box:6027
City:CLEVELAND
State:OH
ZIP:44101-1027
Country:US
Phone:216-566-2902
CAGE:61196
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:DI-SEC-OCTYL PHTHALATE (DI-2-ETHYLHEXYL-PHTHALATE) (SARA
III)
CAS:117-81-7
RTECS #:TI0350000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3/10 STEL
ACGIH TLV:5 MG/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:ISOPROPYL ALCOHOL (SARA III)
CAS:67-63-0
RTECS #:NT8050000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:400 PPM/500 STEL
ACGIH TLV:400 PPM/500STEL;9192
Name:NITROCELLULOSE (RESIN)
CAS:9004-70-0
RTECS #:WG2934500
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
Name:TALC (CONTAINING NO ASBESTOS)
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST; 9192
Name:SILICA, AMORPHOUS HYDRATED (PIGMENT)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3
Name:ISOBUTYL ACETATE (SARA III)
CAS:110-19-0
RTECS #:AI4025000
Fraction by Wt: 45%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM
ACGIH TLV:150 PPM; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:CHROMIUM III OXIDE (SARA 313) (PIGMENT)
CAS:1308-38-9
RTECS #:GB6475000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.5000 MG/M3
ACGIH TLV:0.5000 MG/M3
Name:LEAD CHROMATE (SARA 313) (PIGMENT)
CAS:7758-97-6
RTECS #:GB2975000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.05 MG/M3;0.10 CEIL
ACGIH TLV:0.05 MG/M3
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: <5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:VOC 5.23 LB/GAL LESS WATER & NPRS* 628 G/L LESS WATER
CALCULATED (*NEGLIGIBLY PHOTOCHEMICALLY REACTIVE MATERIALS)
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
Name:VOC 19.34 LB/GAL SOLIDS 2321 G/L SOLIDS CALCULATED.
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:SWALLOW: GASTROINTESTINAL IRRIT.
ASPIRATION OF MAT'L INTO LUNG/CHEMICAL PNEUMONITIS, POSSIBLY FATAL.
INHALED: NOSE & THROAT IRRIT. ACUTE CENTRAL NERVOUS SYSTEM DEPRESS.
EYE/SKIN: IRRIT. CORNEAL DAMAGE . DAMAGE TO BLOOD FORMING, NERVOUS,
URINARY, REPRODUCTIVE SYSTEMS, LIVER & BRAIN. LUNG CANCER.
PERIPHERAL NEUROPATHY.
Explanation of Carcinogenicity:CHROMIUM, CERTAIN CHROMIUM COMPOUNDS,
DI(2-ETHYLHEXYL) PHTHALATE ARE LISTED AS POTENTIAL CARCINOGENS BY
NTP.
Effects of Overexposure:INGEST: NAUSEA/VOMITING. INHALE: HEADACHES,
DIZZINESS, NAUSEA, CONFUSION. CHRONIC OVEREXPOSURE: LOSS OF
APPETITE, METALLIC TASTE IN MOUTH, ANXIETY, CONSTIPATION, NAUSEA,
WEAKNESS, INSOMNIA, MUSCLE & J OINT PAIN. FINE TREMORS, NUMBNESS,
DIZZINESS, HYPERACTIVITY, COLIC. METAL FUME FEVER: FLU-LIKE, FEVER,
CHILLS, COUGH.
Medical Cond Aggravated by Exposure:PREXISTING KIDNEY CONDITIONS
W/EXPOSURES TO LEAD. TOLUENE-KIDNEY, LUNG AND SPLEEN DAMAGE IN LAB
ANIMALS. LAB STUDIES W/RATS-METHYL ETHYL KETONE MAY BE EMBRYOTOXIC,
FETOTOXIC AND TERATOGENIC.
======================= First Aid Measures =======================
First Aid:SWALLOWING: DO NOT INDUCE VOMITING. CALL POISON CONTROL,
EMERGENCY ROOM OR PHYSICIAN IMMED. INHALE: REMOVE TO FRESH AIR
IMMED. IF BREATHING HAS STOPPED, GIVE CPR. KEEP WARM & QUIET. GET
IMMED MEDICAL CARE. EYE: FLUSH W/LARGE AMOUNTS WATER.LIFT UPPER &
LOWER LIDS OCCASIONALLY-15 MIN. GET MEDICAL ATTN. SKIN: REMOVE
CONTAM CLOTHING. FLUSH CONTAMINATED AREA W/LARGE AMOUNTS WATER.
CONSULT PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:24.0F,-4.4C
Autoignition Temp:Autoignition Temp Text:572 F
Lower Limits:1.7
Upper Limits:13.0
Extinguishing Media:NFPA CLASS B FIRE EXT. (CO2, ALL PURPOSE DRY
CHEMICAL OR ALCOHOL FOAM.) POLYMER FOAM IS PREFERRED FOR LARGE
FIRES.
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, USE TO COOL
CONTAINERS (FOG NOZZLES PREFERABLE) TO PREVENT PRESSURE BUILD-UP &
AUTO-IGNITE OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:DURING EMERGENCY CONDITIONS, OVEREXPOSURE
TO DECOMPOSITION PRODUCTS MAY CAUSE A HEALTH HAZARD. SYMPTOMS MAY
NOT BE IMMEDIATELY APPARENT. GET MEDICAL ATTENTION.
================== Accidental Release Measures ==================
Spill Release Procedures:KEEP SPECTATORS AWAY. REMOVE IGNITION SOURCES.
DIKE, CONTAIN & REMOVE SPILL W/INERT MATERIAL. USE COVERED METAL
CONTAINERS FOR RECOVERY/DISPOSAL. USE NON-SPARKING TOOLS. PREVENT
CONTAM OF SEWERS, STRE AMS, AND GROUNDWATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 100 F (38 C). STORE
LARGE QUANTITIES IN COMPLIANCE WITH OSHA 29CFR1910.106. DO NOT TAKE
INTERNALLY. CLOSE CONTAINER AFTER EACH USE.
Other Precautions:DO NOT BREATHE SANDING DUST. DO NOT WASH OR RE-USE
EMPTY CONTAINERS.KEEP FROM CHILDREN. GROUND/BOND CONTAINERS TO THE
RECEIVING CONTAINER. DO NOT WELD, BRAZE OR CUT ON EMPTY CONTAINER.
NEVER EMPTY W/P RESSURE. DRUM IS NOT A PRESSURE VESSEL.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESTRICTED AREA: NIOSH APPR'D CHEMICAL CARTRIDGE
RESPIRATOR. SPRAYING: MECHANICAL PREFILTER MAY BE REQUIRED.
CONFINED AREAS: NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR.
EXCEEDED TLV AREA:NIOSH/MSHA A PPR'D RESPIRATOR W/RIGHT PROTECT
FACTOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION IN SUFFICIENT
VOLUME & PATTERN TO KEEP CONCENTRATIONS BELOW EXPOSURE LIMITS.
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:SAFETY GLASSES W/SIDESHIELDS;FACESHIELD.
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT. SEE
OSHA STANDARD FOR LEAD.
Work Hygienic Practices:WASH HANDS AND FACE THOROUGHLY BEFORE EATING OR
DRINKING.
Supplemental Safety and Health
FLAMMABLE. REMOVE DECOMPOSITION PRODUCTS THAT ARE GENERATED WHEN
WELDING, BRAZING, OR CUTTING OBJECTS COATED WITH THIS PRODUCT. THIS
PRODUCT, IF DISCARDED DIRECTLY, WOULD BE CLASSIFIED HAZARDOUS WAST
E BASED ON ITS IGNITABILITY CHARACTERISTIC. CONTAINS CHROMIUM &
LEAD.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:175 TO 288F
Melt/Freeze Pt:M.P/F.P Text:-50F,-46C
Decomp Temp:Decomp Text:1832F,1000C
Vapor Pres:70 @ 68 F
Vapor Density:> AIR
Spec Gravity:1.1
pH:4-7 *
Viscosity:>200 CST
Evaporation Rate & Reference:SLOWER THAN DIETHYL ETHER
Solubility in Water:SLIGHT IN WATER
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:73
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:AVOID EXCESSIVE HEAT (>100 F (38 C)) AND
SOURCES OF IGNITION.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOKE, CARBON
MONOXIDE & CARBON DIOXIDE. OXIDES OF NITROGEN, CHROMIUM & LEAD MAY
ALSO BE GENERATED.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/FEDERAL, STATE & LOCAL
LAWS & REGULATIONS. INCINERATE ONLY IN EPA FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.USE PRECAUTIONS FOR DISPOSAL OF
FLAMMABLE MATERIALS-D001/D008. U SE HAZARDOUS WASTE LANDFILL FOR
USED ABSORBENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
FILTROL CLAY PRODUCT DESICCITE 25
| 14808-60-7 |
|
SCOTCH-WELD (TM) 2214 REGULAR EPOXY ADHESIV
| 25068-38-6
7429-90-5
9072-62-2
461-58-5
112945-52-5
150-68-5 |
|
CORROSION PREVENTIVE COMPOUND
| 64741-73-7
76-13-1
124-38-9 |
|
LACQUER ACRYLIC N.C. CAM OLIVE DRAB 34088
| 108-88-3
117-81-7
67-63-0
9004-70-0
14807-96-6
112945-52-5
110-19-0
1308-38-9
7758-97-6
78-93-3 |
|
TRU-BOND 214 PART A
| 2426-08-6
106-89-8
7440-22-4 |
|
TRU-BOND 214 PART B
| 108-95-2
111-40-0 |
|
ANAEROBIC ADHESIVE/SEALANT GRADE H
| 81-07-2 |
|
HD 3404
| 112-24-3
6531-38-0
24028-46-4
4097-89-6 |
|
SCOTCH WELD TM 1751-A EPOXY ADHESIVE ACCELE
| 68410-23-1
68953-58-2
112945-52-5 |
|
SCOTCH WELD 1751-B EPOXY ADHESIVE (ALUMINUM
| 25068-38-6
7429-90-5
68953-58-2
112945-52-5
108-46-3 |
|
ELMERS GLUE ALL
| |
|
ANAEROBIC ADHESIVE/SEALANT GRADE C
| 81-07-2 |
|
CS 3204
| 108-88-3
13463-67-7
1317-65-3
1313-13-9 |
|
DERMI-KLENE WATERLESS HANDCLEANER
| |
|
PSI 621 LOW MODULUS SILICONE SEALANT
| 1317-65-3
26761-40-0
13463-67-7 |
|
COATING COMPOUND, PAINT, ANTI-SWEAT
| 13463-67-7
61789-51-3
11336-93-2 |
|
POTASSIUM DICHROMATE, PHOTOGRAPHIC GRADE
| 7778-50-9 |
|
ENAMEL, ALKYD, GLOSS, LO VOC CNT BLUE 15045
| 1330-20-7
64742-95-6
123-86-4
147-14-8
13463-67-7
14808-60-7
1317-95-9
64475-85-0
110-12-3
100-41-4
78-93-3 |
|
PRIMER N
| 71-55-6 |
|
ANAEROBIC ADHESIVE/SEALANT GRADE HV
| 81-07-2 |
|
SW14,SW15,SW151P,7024,SW610,AP100,SW612,SW-
| 7439-89-6
12030-97-6
546-93-0
7439-96-5
1312-76-1
1344-28-1
1309-48-4
7440-21-3
7440-02-0
7440-47-3
1314-23-4
9004-34-6
1317-65-3
13463-67-7
6834-92-0
68476-25-5
1302-78-9
7789-75-5
1314-23-4
7439-98-7 |
|
FE-0004-A
| |
|
FE-0004-B
| 111-40-0 |
|
SODIUM AZIDE
| 26628-22-8 |
|
ANAEROBIC ADHESIVE/SEALANT GRADE AA
| 81-07-2 |
|
ANAEROBIC ADHESIVE/SEALANT GRADE AV
| 81-07-2 |
|
PAINT, TRAFFIC, WHITE
| 107-21-1
13463-67-7
68855-54-9 |
|
PARABOND P-8
| 109-99-9
78-93-3
108-94-1 |
|
GLYPTAL, S-1193
| 108-10-1
1330-20-7
123-86-4
108-65-6
108-94-1
71-36-3
108-88-3
67-63-0
123-86-4 |
|
ENAMEL ALKYD GLOSS LO VOC BLUE 15182
| 1330-20-7
64742-95-6
123-86-4
110-12-3
64475-85-0
147-14-8
13463-67-7
14808-60-7
1317-95-9
100-41-4
78-93-3 |
|
PR-1568
| 9016-87-9
108-90-7
1330-20-7
100-41-4 |
|
(1 SHOT) LETTERING ENAMELS, 191L
| 64742-95-6
108-67-8
95-63-6
8030-30-6
68037-38-7
1333-86-4
1309-37-1
7439-92-1
12688-94-7 |
|
IRC R 35 WHITE RUBBER CEMENT PARTS A-B
| |
|
DETERGENT, LAUNDRY, LIQUID
| 9003-04-7 |
|
EPK-6C PART A
| 7429-90-5
14807-96-6 |
|
EPK 6 C PART B
| 14807-96-6
112945-52-5
111-40-0 |
|
414-450 PHOTO PRINT ACTIVATOR
| 1310-58-3
7732-18-5 |
|
MIL-C-22750, 13538, EPOXY, M2-026
| 78-93-3
123-86-4
110-80-5
1330-20-7
1330-20-7
1306-23-6 |
|
MIL-C-22750, POLYAMID, V0-082 PART B
| 67-63-0
78-93-3 |
|
EPK 0151 PART A
| 2426-08-6
112945-52-5 |
|
EPK 0151 PART B
| 112945-52-5
112-24-3 |
|
TURTLE WAX SUPER HARD SHELL LIQUID
| 92045-37-9
64475-85-0
64741-44-2 |
|
MINOLTA DEVELOPER EG101/201
| 1333-86-4 |
|
L-313 MODIFIED EPOXY FILM
| 28064-14-4
461-58-5
112945-52-5 |
|
TILEX
| 1310-73-2
7681-52-9 |
|
TT-E-2124, 14193 GREEN, H4-014
| 1330-20-7
108-10-1
108-83-8
7758-97-6
25086-48-0
8032-32-4
3279-27-4
67-56-1
111-76-2
108-65-6
108-65-6
108-88-3 |
|
EA 9330 PART A
| 112945-52-5
1344-28-1 |
|
EA 9330 PART B
| |
|
LAC, ACRYLIC, N/C, CAM GRAY 36081 ID 792610
| 110-19-0
67-63-0
9004-70-0
78-83-1
14464-46-1
14807-96-6
13463-67-7
141-78-6
1333-86-4
117-81-7
108-10-1
108-88-3 |
|
OPTHALENE DA6390
| 111-76-2
67-63-0
7664-41-7
74-98-6
75-28-5 |
|
|