===================== Product Identification =====================
MSDS NAME:RED SOLVENTBASE CURB, 716A9
NIIN:00N019284
MSDS Number: BLDWP
=== Responsible Party ===
Company:WHITTAKER CORPORATION
Address:1021 N MISSION ROAD
City:LOS ANGELES
State:CA
ZIP:90033
Country:US
Info Phone Num:213-225-4154
Emergency Phone Num:213-225-4154
CAGE:GO803
=== Contractor Identification ===
Company:MORTON INTERNATIONAL
Address:1021 N MISSION RD
Box:City:LOS ANGELES
State:CA
ZIP:90033
Country:US
Phone:213-225-4154
CAGE:7D283
Company:WHITTAKER CORPORATION/PROVIDENCE CHEMICALS DIV
Address:KING PHILIP ROAD
Box:City:EAST PROVIDENCE
State:RI
ZIP:02916
Country:US
Phone:413-592-4191
CAGE:GO803
============= Composition/Information on Ingredients =============
Name:ING 11:INCREASES OF KIDNEY/LIVER DAMAGE OR TUMORS.
RTECS #:9999999ZZ
Name:VM & P NAPHTHA; (SUPER VM & P NAPHTHA). VP:26 @ 20C.
CAS:64742-89-8
OSHA PEL:300 PPM;400 PPM STEL
ACGIH TLV:300 PPM
Name:LEAD-MOLYBDENUM CHROMATE
CAS:12709-98-7
RTECS #:OG1625000
OSHA PEL:10MG/M3 TDUST(AS MO)
ACGIH TLV:0.05 MG/M3 (AS CR)
Name:SOLVENT NAPHTHA, LIGHT ALIPHATIC;(LT ALIPHATIC NAPHTHA)
VP:60 @ 20C.
CAS:64742-89-8
ACGIH TLV:200 PPM (MFR)
Name:HIGH FLASH NAPHTHA;(SUPER HIGH FLASH NAPHTHA). VP:10 @ 20C.
CAS:64742-95-6
OSHA PEL:25 PPM (MFR)
ACGIH TLV:25 PPM (MFR)
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:SUPP DATA:ANIMALS. RECURRENT OVEREXP MAY RESULT IN LIVER &
KIDNEY INJURY. CAN BE ABSORBED THROUGH SKIN IN (SEE ING 8)
RTECS #:9999999ZZ
Name:ING 7:HARMFUL AMTS. METHYL ETHYL KETONE:HIGH CON HAVE
CAUSED EMBRYOTOX EFTS IF LAB ANIMALS. HAS BEEN (SEE ING 9)
RTECS #:9999999ZZ
Name:ING 8:DEMONSTRATED TO SHORTEN PERIPHERAL NEUROPATHY CAUSED
BY EITHER N-HEXANE OR METHYL-N-BUTYL KETONE. (SEE ING 10)
RTECS #:9999999ZZ
Name:ING 9:MEK BY ITSELF HAS NOT BEEN DEMONSTRATED TO CAUSE
PERIPHERAL NEUROPATHY. VM&P NAPHTHA:LAB STUDIES HAVE (SEE ING 11)
RTECS #:9999999ZZ
Name:ING 10:SHOWN PETROLEUM DISTILLATES CAUSE KIDNEY/LIVER
TUMORS. SEV STUDIES EVAL WORKERS HAVE NOT SHOWN SIGNIF(SEE ING 12)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:GI DISTRESS. SKIN:RPTD/PRLNGD
LIQ CONTACT MAY CAUSE IRRIT W/DISCOMFORT & DERM. MAY ALSO CAUSE
ALLERGIC SKIN REACTIONS. EYE:MAY CAUSE IRRIT W/DISCOMFORT, TEARING
OR BLURRED VISION. INHAL:MAY CAU SE NOSE AND THROAT IRRIT. MAY
CAUSE NERV SYS DEPRESS CHARACTERIZED BY FOLLOWING PROGRESSIVE
STEPS:(EFTS OF OVEREXP)
Explanation of Carcinogenicity:LEAD/LEAD CMPDS:IARC GROUP 2B.
Effects of Overexposure:HLTH HAZ:HDCH, DIZZ, NAUS, STAGGERING GAIT,
CONFUSN, UNCON. REPORTS HAVE ASSOCIATED RPTD/PRLNGD EXPOS TO SOLVS
W/PERM BRAIN & NERV SYS DMG. CHRONIC:LEAD CHROMATE:MAY CAUSE IRRIT
OF MUC MEMB. OVEREXP T O LEAD MY CAUSE ADVERSE EFTS TO BLOOD
FORMING TISS, NERV, URINARY & REPROD SYS INCL EMBRYOTOX EFTS. SYMPS
MAY(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INGEST:CALL MD IMMEDIATELY & HAVE NAMES OF INGREDIENTS
AVAILABLE. SKIN:IMMED FLUSH WITH PLENTY OF SOAP & WATER FOR AT
LEAST 15 MINS, WHILE REMOVING CONTAMINATED CLOTHING & SHOES.
EYE:IMMED FLUSH W/PLE NTY OF WATER FOR AT LEAST 15 MINS; CALLMD. IF
IRRIT OCCURS, GET MD. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE
ARTF RESP, PREF MOUTH-TO- MOUTH. IF BRTHG DFCLTY PERSISTS OR OCCURS
LATER, GET MD.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:23.0F,-5.0C
Lower Limits:1.0%
Extinguishing Media:USE CHEMICAL FOAM, DRY CHEMICAL, OR CARBON DIOXIDE.
"ALCOHOL" FOAM FOR POLAR SOLVENTS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . WATER FROM FOG NOZZLES MAY BE USED TO COOL
CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP.
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE FLASHPOINT, EMITS FLAMM
VAPORS WHICH, WHEN MIXED WITH AIR, CAN BURN OR BE EXPLOSIVE. FINE
MISTS OR SPRAYS MAY BE FLAMM AT TEMPS BELOW FLASH PT
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. VENTILATE
AREAS. REMOVE MATERIAL WITH INERT ABSORBENT AND USE NON SPARKING
TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 120F. DO NOT CUT, GRIND,
WELD, OR DRILL NEAR THIS CONTAINER. AVOID EXPOSURE TO VAPORS.
GROUND CONTAINER WHILE POURING.
Other Precautions:MINIMIZE DISTANCE OF FREE FALL TO AVOID STATIC ELEC
GENERATION. CNTNRS, EVEN THOSE EMPTIED, WILL RETAIN PROD
RESIDUE/VAPS. ALWAYS OBEY HAZ WARNINGS & HNDL CNTNRS AS IF THEY
WERE FULL. SEE OSHA STAND 2 9CFR 1910.1025 FOR HNDLG LEAD
COMPOUNDS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ALL RESPS MUST BE NIOSH/MSHA APPRVD. VENT
WORKING SPACES TO BELOW TLV.IF LOC EXHST NOT AVAIL, USE RESP
DEVICE.USE AIR PURIFYING RESP W/HEPA DUST CARTRIDGES FOR CONC BELOW
0.05 MG/M3 AS LEAD. FOR CONC >0.05 MG/M3 AS LEAD, USE FULL FACE
RESP.
Ventilation:LOCAL EXHAUST TO MAINTAIN VAPOR CONC BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE BATH RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
REUSE, DISCARD SHOES IF SATURATED.
Supplemental Safety and Health
EFTS OF OVEREXP:INCLUDE LOSS OF APPETITE, ANEMIA, DISTURBANCE OF SLEEP
& FATIGUE. SEE OSHA LEAD STANDARD 29CFR 1910.1025 FOR MED
COMPLIANCE REQ IN CASE OF EXPOS ABOVE PEL FOR LEAD COMPOUNDS. SUPER
HIG H FLASH NAPHTHA:CNTNS LESS THAN 5% XYLENES WHICH HAVE FOLLOWING
EFTS:HIGH CONC HAVE CAUSED EMBRYOTOX EFTS (SEE ING 7)
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:>175F,79C
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:57.63
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY LIBERATE CO, CO2, AND UNIDENTIFIED
ORGANIC COMPOUNDS IN BLACK SMOKE. LEAD AND CHROMIUM OXIDES FORM
AFTER IGNITION.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS. DO NOT INCINERATE IN A CLOSED CONTAINER.
COMPLY WITH ALL APPLICABLE GOVERNMENTAL REGULATIONS ON SPILL
REPORTING. SEE OSHA STAN DARD 29 CFR 1910.1025 FOR HANDLING
LEADCOMPOUNDS
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SUPELPREME-HC BASE-NEUTRALS MIX-2 1ML, 4890
| 95-50-1
541-73-1
106-46-7
121-14-2
606-20-2
87-68-3
77-47-4
78-59-1
98-95-3
75-09-2
91-58-7
103-33-3
120-82-1
118-74-1
67-72-1 |
|
SUPELPREME-HC INTRNL STD MIX 1ML, 48902
| 85-01-8
91-20-3
198-55-0
106-46-7
83-32-9
218-01-9
75-09-2 |
|
SUPELPREME-HC PHENOLS MIX 1 ML, 48904
| 51-28-5
88-06-2
59-50-7
95-57-8
88-75-5
100-02-7
534-52-1
87-86-5
108-95-2
75-09-2
120-83-2
105-67-9 |
|
SUPELPREME-HC PAH MIX 1ML, 48905
| 129-00-0
191-24-2
86-73-7
85-01-8
53-70-3
193-39-5
71-43-2
75-09-2
208-96-8
120-12-7
206-44-0
91-20-3
83-32-9
56-55-3
50-32-8
205-99-2
207-08-9
218-01-9 |
|
BENZOYLECGONINE 10MG,
| 519-09-5 |
|
3-BENZYLOXAZOLIDINE 100MG, 48575.
| 108-88-3 |
|
KEMIKAL STABILIZATION HYDRATE
| 1305-62-0 |
|
KEMIKAL HYDRATE ANTISTRIP
| 1305-62-0 |
|
KEMIKAL CHEMICAL HYDRATED LIME
| 1305-62-0 |
|
CASTOR OIL DB, T3228
| 68187-84-8 |
|
PBXW-7, EG00022
| 121-82-4
3058-38-6
58-89-9 |
|
LAPPING COMPOUNDS #60N MEDIUM
| 14808-60-7
7727-43-7 |
|
2510/2511/2520/2520EO DRY INK PLUS VERSATIC
| 9003-07-0
7631-86-9
25213-39-2
1333-86-4 |
|
PT 565 8LBS
| 51-03-6
463-04-7
64742-48-9
71-55-6
124-38-9
75-45-6
8003-34-7 |
|
PT 565 6 OZ
| 71-55-6
74-98-6
8003-34-7
51-03-6
463-04-7
64742-48-9 |
|
WHITMIRE PT 565 2LB
| 75-09-2
74-98-6
8003-34-7
51-03-6
463-04-7
64742-48-9 |
|
WHITMIRE PT 565 15 LBS
| 71-55-6
124-38-9
75-45-6
8003-34-7
51-03-6
463-04-7
64742-48-9 |
|
WHITMIRE PT 565 23 OZ
| 71-55-6
74-98-6
8003-34-7
51-03-6
463-04-7
64742-48-9 |
|
SOLDER-60/40 ROSIN CORE, 6044
| 7440-31-5
7439-92-1 |
|
SOLDER-60/40 ROSIN CORE, H3-391
| 7440-31-5
7439-92-1 |
|
SOLDER-60/40 ROSIN CORE, H3-390
| 7439-92-1
7440-31-5 |
|
SOLDER-60/40 ROSIN CORE, 9134
| 7440-31-5
7439-92-1 |
|
SOLDER-60/40 ROSIN CORE, 9132
| 7440-31-5
7439-92-1 |
|
SOLDER-60/40 ROSIN CORE, 6045
| 7440-31-5
7439-92-1 |
|
SOLDER-60/40 ROSIN CORE, 6039
| 7440-31-5
7439-92-1 |
|
8241A REDY MASTIC 486 STANDARD FLOOR EPOXY
| 25068-38-6
67-63-0
2807-30-9 |
|
5952 WOODSOL SHELLAC
| 67-56-1 |
|
6435 RUBBERIZED CRACK FILLER EMULSION
| |
|
PREMIUM FIBERED ALUM ROOF CTG
| 8052-41-3
7429-90-5
12001-26-2 |
|
RED SOLVENTBASE CURB, 716A9
| 64742-89-8
12709-98-7
64742-89-8
64742-95-6
78-93-3
7439-92-1 |
|
497 LAQUER THINNER
| 64742-89-8
141-78-6
108-88-3
67-63-0
78-93-3
78-83-1
110-43-0
64-17-5 |
|
SIMONIZ NO RINSE
| 7732-18-5
141-43-5 |
|
SODIUM BISULFITE SOLUTION
| 7631-90-5 |
|
FLAKE CALCIUM CHLORIDE POWDERED CALCIUM CHL
| 10035-04-8 |
|
ALUM (DRY)
| 10043-01-3 |
|
PHREEGUARD 5110, 1734
| 1310-58-3 |
|
INDUSTRIAL ENAMEL, 7280
| 8052-41-3 |
|
INDUSTRIAL ENAMEL, 7290
| 8052-41-3 |
|
TOPCOATS BRUSH GOODS, 7449
| 8052-41-3 |
|
TOPCOATS BRUSH GOODS, 7524
| 8052-41-3 |
|
TOPCOATS BRUSH GOODS, 7738
| 8052-41-3
1330-20-7 |
|
TOPCOATS BRUSH GOODS, 7741
| 8052-41-3
1330-20-7 |
|
TOPCOATS BRUSH GOODS, 7745
| 8052-41-3
1330-20-7 |
|
DIRT FIGHTER LATEX SATIN FLOOR ENAMEL, 71-8
| 13463-67-7
112-34-5
107-21-1 |
|
DIRT FIGHTER LATEX SATIN FLOOR ENAMEL,71-85
| 112-34-5
107-21-1
13463-67-7
1308-38-9 |
|
1075/1090/4050/4090/4650/DRY INK 1075/1090/
| 25213-39-2
1333-86-4
123-03-5 |
|
1075/1090/4050/4090/4650/DRY INK 1075/11090
| 25213-39-2
1333-86-4
123-03-5 |
|
1075/1090/4050/4090/4650/DRY INK 1075/1090
| 25213-39-2
1333-86-4
123-03-5 |
|
1075/1090/4050/4090/4650/ DRY INK 1075/1090
| 25213-39-2
1333-86-4
123-03-5 |
|
1075/1090/4050/4090/4650/DRY INK 1075/1090(
| 25213-39-2
1333-86-4
123-03-5 |
|
|