===================== Product Identification =====================
MSDS NAME:PR-1141 PC-50 POLAR WHITE, PART B
NIIN:00N022260
MSDS Number: BLWWC
=== Responsible Party ===
Company:PRODUCTS RESEARCH & CHEMICAL CORP
Address:5430 SAN FERNANDO ROAD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Info Phone Num:818-240-2060
Emergency Phone Num:800-228-5635;800-424-9300(CHEMTREC)
Preparer's Name:RDC
CAGE:DO563
=== Contractor Identification ===
Company:PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Phone:818-240-2060
CAGE:83574
Company:PRODUCTS RESEARCH & CHEMICAL
Address:NOW DBA COURTAULDS AEROSPACE
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Phone:818-240-2060
CAGE:DO563
============= Composition/Information on Ingredients =============
Name:2-HEPTANONE;(METHYL N-AMYL KETONE). VAPOR DENSITY:3.94.
EVAPORATION RATE:0.4.
CAS:110-43-0
RTECS #:MJ5075000
Fraction by Wt: 40%
OSHA PEL:100 PPM
ACGIH TLV:50 PPM
Name:POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER)
(CONTAINS INGREDIENT 3)
CAS:59330-00-6
Fraction by Wt: 30%
Name:ISOCYANIC ACID, METHYLENEDI-4,1-CYCLOHEXYLENE
ESTER;(MONOMERIC METHYLENE BIS (4-CYCLOHEXYL ISOCYANATE)
CAS:5124-30-1
RTECS #:NQ9250000
OSHA PEL:0.01 PPM,C
ACGIH TLV:0.005 PPM
Name:POLYURETHANE PREPOLYMER; (POLYESTER POLYOL POLYMER)
(CONTAINS INGREDIENT 5)
CAS:55636-48-1
Name:ISOCYANIC ACID, METHYLENE
(3,5,5-TRIMETHYL-3,1-CYCLOHEXYLENE) ESTER; (MONOMERIC ISOPHORONE
DIISOCYANATE) (IPDI).
CAS:4098-71-9
RTECS #:NQ9370000
Other REC Limits:0.005 PPM,S (MFR)
OSHA PEL:S 0.005PPM/0.02STEL
ACGIH TLV:0.005 PPM; 9394
Name:SUPP DATA:RESEAL CONTAINERS IF MOISTURE CONTAMINATION IS
SUSPECTED.
RTECS #:9999999ZZ
Name:VENT:AIRBORNE LEVELS OF SOLVENT/ISOCYANATE IS EXCESS OF
PEL, USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR.
RTECS #:9999999ZZ
Name:SPILL PROC:LOOSELY COVERED FOR 48 HOURS.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:VAPORS WILL CAUSE IRRITATION WITH
WATERING OF EYES. LIQUID CONTACT WILL CAUSE IRRITATION AND POSSIBLE
PERMANENT DAMAGE. SKIN:LOCAL SWELLING, SORENESS, ITCHING. IN
SENSITIZED INDIVIDUALS, EXPOSURE TO LIQUID OR VAPORS WILL RESULT
IN ALLERGIC SKIN RASH. INHAL:IRRITATION OF NOSE, THROAT AND EYES.
(EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:BRONCHIAL IRRIT W/COUGHING, TIGHTNESS
IN CHEST & POSS DFCLTY IN BRTHG. MAY PRODUCE ASTHMA-LIKE SYMPTOMS
IN SENSITIZED INDIVIDUALS. INDIVIDUALS SUFFERING FROM ASTHMA/OTHER
CHRONIC RESP CNDTNS MAY EXHIBIT HEIGHTENED SENSITIVITY TO
ISOCYANATES & SHOULD AVOID INHAL EXPOS. INGEST:IRRIT OF DIGESTIVE
TRACT & STOMACH.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH WITH LUKE WARM WATER FOR AT LEAST 15 MINUTES. IF
SYMPTOMS PERSIST, CALL MD. SKIN:WASH WITH SOAP & WATER. IF SYMPTOMS
PERSIST, CALL MD. INHAL:REMOVE TO FRESH AIR. IF SYMPTOMS ARE
PRESENT CALL MD. INGEST:CALL MD.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:102F,39C
Lower Limits:1.1%
Upper Limits:7.9%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL IGNIT SOURCES. WEAR AIR-SUPPLIED
RESP FOR MAJOR UNVENT SPILL. COVER W/ABSORB MATL, ADD DECONTAM SOLN
(5% CONC AMMONIA, 2% DETERGENT, 93% WATER) & ALLOW TO RECT FOR 10
MINS. COLLECT IN CNTNR S, ADD ADDITIONAL DECOMTAM SOLN & KEEP (SEE
ING 8)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:SPRAY APPLICATION SHOULD BE ISOLATED
TO REDUCE POTENTIAL FOR EXPOSURE. PROTECT WORKERS AND GENERAL
PUBLIC DURING SPRAY APPLICATION.
Other Precautions:IN OPEN AREAS, AT LEAST 100 FEET SHOULD SEPARATE OPER
FROM ANY PERS NOT PROT AS STATED. INSIDE SPRAY APPLIC SHOULD BE IN
AREA SEPARATED FROM OTHER WORK AREAS BY WALLS & VENT BY LOC VENT,
PROPERLY DESI GNED & OPERATED I/A/W (SEE SUPP DATA)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR MUST
BE USED DURING SPRAY APPLICATION.
Ventilation:GEN VENT TO MAINTAIN VAPS BELOW PEL. WHEN APPLYING IN
CONFINED AREAS/IN OTHER CIRCUMSTANCES LIKELY TO PRODUCE(SEE ING 7)
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG W/FULL LENGTH FSHLD
Other Protective Equipment:FULL, PERMEATION RESISTANT, PROT SUIT INCL
HEAD COVERING AND OVERSHOES. PROTECT FULL FROM ANY CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PREC:ACGIH GUIDELINES AS CONTAINED IN ITS INDUSTRIAL VENTILATION
PUBLICATION OR OTHER APPROPRIATE COLLECTION SYSTEM TO COLLECT ANY
OVERSPRAY. UNPROT PERS MUST BE PVNTD FROM CONTACTING UNCURED RE
SIDUE ON EQUIP & AREA SURFS UNTIL PROD HAS CURED. AVOID MOISTURE
CONTAM WHICH WILL CAUSE CO2 PRESS. DO NOT (SEE ING 4)
================== Physical/Chemical Properties ==================
HCC:F4
Vapor Density:SEE ING 1
Spec Gravity:0.96
Evaporation Rate & Reference:SEE ING 1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR VISCOUS LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, STRONG BASES, AMINES. STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COX.
==================== Disposal Considerations ====================
Waste Disposal Methods:EPA WASTE NO. D-001. DISPOSE OF SPILLAGE IN
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
TOTAL PROTEIN REAGENT, 541-2; T9155
| |
|
TRIACETIN (C2:0), T5376
| 102-76-1 |
|
TRANSFER RECORDING CARTRIDGE FOR (SUPP DAT
| 25038-59-9
8015-86-9
8002-74-2
1333-86-4
64742-16-1
24937-79-9
116-14-3
9004-36-8
24937-78-8 |
|
TRANSFER RECORDING CARTRIDGE FOR (SUPP DATA
| 24937-78-8
25038-59-9
8015-86-9
8002-74-2
1333-86-4
64742-16-1
24937-79-9
116-14-3
9004-36-8 |
|
GLUCOSE OXIDASE TYPE VII-S FROM ASPERGILLUS
| 9001-37-0 |
|
TETRODOTOXIN, T8024
| 4368-28-9 |
|
2-THIOBARBITURIC ACID, T5500
| 504-17-6 |
|
HEMATOXYLIN CERTIFIED, H3136
| 517-28-2 |
|
8-HYDROXYQUINOLINE FREE BASE, H6878
| 148-24-3 |
|
WHITE MIST, CELITE 212
| 68855-54-9
14464-46-1
14808-60-7 |
|
WHITE MIST, CELITE 219
| 14808-60-7
68855-54-9
14464-46-1 |
|
WHITE MIST, CELITE 223
| 68855-54-9
14464-46-1
14808-60-7 |
|
C/M DY-PLUS AEROSOL, 5089
| 76-13-1
8008-20-6
124-38-9 |
|
SURFACE BOND, 10150
| 64742-47-8
67-63-0
123-86-4
64742-89-8 |
|
ULTRA FLEX CLEAR PRIMER, 21697
| 64742-86-5 |
|
FLEX PRIME WHITE, 2333
| 107-21-1
14808-60-7 |
|
EX/IN ALK S/G EN NEUTRAL BASE, 4230
| 8052-41-3 |
|
LABOR SAVER STRIPING PAINTS, 2593
| 110-54-3
64742-96-6
67-56-1
74-98-6
75-28-5
13463-67-7
1330-20-7
108-88-3 |
|
GACOFLEX, T-5112
| 1330-20-7 |
|
DSX EXTRA OIL ADDITIVE
| 116-14-3
66101-60-8 |
|
INTERLAC WHITE SILICONE ALKYD, CMB000
| 8032-32-4
8030-30-6
64742-88-7 |
|
INTERLAC FRENCH GRAY ALKYD ENAMEL, CLJ724
| 8032-32-4
64742-88-7
7439-92-1
7440-47-3 |
|
INTERLAC INT' ORANGE ALKYD ENAMEL, CLD260
| 1330-20-7
64742-95-6
8032-32-4
64742-88-7
7439-92-1
7440-47-3 |
|
NMC EN 16OZ OMNI-PAK ENAMEL, NMC EN
| 67-64-1
763-69-9
75-28-5
74-98-6 |
|
00889 HI-TECH WASP & HORNET, 00889 H
| 10453-86-8
64742-88-7
76-13-1
124-38-9 |
|
CANON CT-SX TONER
| 25153-46-2
1309-38-2
88377-66-6
9003-07-4
9002-88-4
61790-53-2 |
|
ENVI/SORB OIL ABSORBANT FOR ALL HYDROCARBON
| |
|
FLITZ-POLIER HARD SURFACE PROTECTOR
| |
|
PAOL 20
| |
|
EMIT T-UPTAKE ASSAY, 5J078UL
| 144-02-5 |
|
EMIT T-UPTAKE ASSAY, 6J509UL
| 144-02-5 |
|
EMIT T-UPTAKE ASSAY, 6J509
| 144-02-5 |
|
EMIT T-UPTAKE ASSAY, 6J418UL
| 144-02-5 |
|
EMIT T-UPTAKE ASSAY, 5J019UL
| 144-02-5 |
|
76 74302 PTC EXTERIOR YELLOW
| 9016-45-9
14807-96-6
107-21-1
111-46-6 |
|
76 74323 PTC THALO GREEN
| 37340-60-6
9014-92-0
14807-96-6
1328-53-6
107-21-1
111-46-6 |
|
KEL-GUARD ZINC CHROMATE/RED OXIDE PRIMER 17
| 64742-86-5
37300-23-5
64742-47-8
64742-95-6
68515-25-3 |
|
REICHHOLD SUPEROX 702, REICHHOLD CATALYST
| 1338-23-4
131-11-3
7722-84-1
78-93-3 |
|
THORTEX TX 805 PRIMER BASE WALL TECH LW
| 25068-38-6 |
|
THORTEX TX 805 AGGREGATE WALL TECH LW
| 13463-67-7 |
|
SIKAGARD 62 GRAY HI BILD PART A, 601
| 25068-38-6 |
|
SIKAGARD 62 TAN HI BILD PART A, 601
| 25068-38-6 |
|
SIKAGARD 62 YELLOW HI BILD PART A, 601
| 25068-38-6 |
|
PR-1141 PC-50 POLAR WHITE, PART B
| 110-43-0
59330-00-6
5124-30-1
55636-48-1
4098-71-9 |
|
PR-1141 PC-50 POLAR WHITE, PART A
| 110-43-0
14808-60-7
38499-32-4
13463-67-7
10101-39-0 |
|
AB-15/PAB-15 PAINT PENS/ALL COLORS
| 1330-20-7 |
|
PPC NO 3, 7038
| 111-76-2
2807-30-9
67-63-0 |
|
HYDROGEN IN ARGON MIXTURE 0.0001% TO 50%, G
| 7440-37-1
1333-74-0 |
|
H/S EPOXY MASTIC CIRRUS GRAY, LF-63725P
| 13463-67-7
12001-26-2
25068-38-6
64742-95-6 |
|
CATHA COAT 305 RED POW POR, 305PO799
| 7440-66-6
12751-22-3
1309-37-1 |
|
|