vent: in sec below acceptable limit, lel in ing 5: or flame cutting on surfaces coated with product. carcinogen: di-(2-ethyl hexyl) phthalate: group 2 (ntp), antimony oxide lead compounds; (lead compound(s) insoluble) chromic acid, lead (2+) salt (1:1); (lead chromate (pb; cr pathalic acid, bis(2-ethylhexyl)ester; (di-2-ethylhexyl
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHAL: ANESTHETIC, IRRITATION OF THE
RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM, DEPRESSION CHARACTERISED
BY HEADACHE, DIZZINESS, STAGGERING GAIT, CONFUSION,
UNCONSCIOUSNESS, OR COMA. SKIN OR EYE: PRIM ARY IRRITANT.
Explanation of Carcinogenicity:ANTIMONY TRIOXIDE:GRP 2B(IARC); LEAD &
LEAD CPDS:GRP 2B(IARC); LEAD CHROMATE: GROUP 1(NTP), GROUP 1(IARC);
(ING 7)
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:FUMES: INHAL: REMOVE FROM EXPOSURE. RESTORE BREATHING. KEEP
WARM & QUIET. NOTIFY PHYSICIAN. SPLASH(EYES): FLUSH IMMEDIATELY
WITH COPIOUS QUANTITIES OF RUNNING WATER FOR AT LEAST 15 MIN. TAKE
TO A PHYS ICIAN FOR A DEFINITIVE MEDICAL TREATMENT. SPLASH(SKIN):
REMOVE WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. INGEST:
GET MD IMMEDIATELY .
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:>390F,>199C
Extinguishing Media:USE NFPA CLASS B EXTINGUISHER CARBON DIOXIDE, DRY
CHEMICAL OR FOAM DESIGNED TO EXTING NFPA CLASS I B FLAMM LIQ FIRES.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER MAY BE
USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED. ISOLATE
FROM HEAT.
Spill Release Procedures:VENTILATE AREA. REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120 F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID FREE FALL OF LIQUID IN
EXCESS OF A FEW INCHES. DO NOT FLAME CUT, BRAZE, OR WELD WITHOUT US
BUREAU OF MINES APPROVED RESPIRATOR OR APPROPRIATE VENTILATION.
Respiratory Protection:IN OUTDOOR/OPEN AREAS USE NIOSH/MSHA APPROVED
MECH FILTER RSP TO REMOVE SOLID AIR BORNE PARTICLES OF OVERSPRAY
DURING SPRAY APPLICATION. IN RESTRICTED VENT AREAS USE NIOSH/MSHA
APPROVED CHEMICAL-MECH FILTERS DESIGNED TO REMOVE (SUPP DATA)
Ventilation:PROVIDE GEN DILTION/LOC EXHST VENT DURING SPRAY &/OR FUSING
IN VOLUME AND PATTERN TO KEEP TLV OF MOST HAZ ING (ING 5)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT WITH
CONTAMINATED CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: H*2O IS USED, FOG NOZZ PREFERABLE. WEAR NIOSH/MSHA
APPRVD SCBA & FULL PROT EQIP. HAZ DECOMP PROD: OF ANY HEAVY METALS
LISTED IN INGRED SEC. RESP PROT: A COMBINATION OF PARTICULA TES &
GAS & VAP. IN CONFINED AREAS USE NIOSH/MSHA APPRVD AIR LINE TYPE
RESP/HOODS.
HCC:N1
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:NIL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ FUMES WHEN HEATED TO
DECOMP AS IN WELDING. FUMES MAY CONTAIN CO, AND HCL, AS WELL AS
OXIDES (SUPP DATA)
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.