===================== Product Identification =====================
MSDS NAME:HI-ALLOY
NIIN:00-453-5950
MSDS Number: BMDRK
=== Responsible Party ===
Company:HI-ALLOY WELD SPECIALTIES INC
Box:266266
City:HOUSTON
State:TX
ZIP:77207
Country:US
Info Phone Num:713-645-3270
Emergency Phone Num:713-645-3270
CAGE:HIALL
=== Contractor Identification ===
Company:HI-ALLOY WELD SPECIALTIES INC
Address:4574 S WAYSIDE DR
Box:City:HOUSTON
State:TX
ZIP:77207
Country:US
Phone:713-645-3270
CAGE:HIALL
Company:NATIONAL TORCH TIP CO INC.
Address:50 FREEPORT RD
City:PITTSBURGH
State:PA
ZIP:15215-2906
Country:US
Phone:412-781-4200
CAGE:93009
============= Composition/Information on Ingredients =============
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Other REC Limits:NONE SPECIFIED
OSHA PEL:5 MG/M3
ACGIH TLV:10 MG/M3 AS FE2O3
Name:CHROMIUM (SARA III)
CAS:7440-47-3
RTECS #:GB4200000
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL (SARA III)
CAS:7440-02-0
RTECS #:QR5950000
Other REC Limits:NONE SPECIFIED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
Name:MANGANESE (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Other REC Limits:NONE SPECIFIED
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:MOLYBDENUM
CAS:7439-98-7
RTECS #:QA4680000
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293
Name:SILICA GEL
CAS:112945-52-5
RTECS #:VV7310000
Other REC Limits:NONE SPECIFIED
OSHA PEL:6 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:CELLULOSE (PAPER FIBER)
CAS:9004-34-6
RTECS #:FJ5691460
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9192
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC-WELDING MAY CREATE ONE OR
MORE OF THE FOLLOWING HEALTH HAZARDS: FUMES AND GASES-CAN
BEDANGEROUS TO YOUR HEALTH. ARC RAYS-CAN INJURE EYE AND BURN SKIN.
ELECTRIC SHOCK-CAN KILL.
Explanation of Carcinogenicity:NICKEL AND CHROMIUM COMPOUNDS ARE
CONSIDERED CARCINOGENIC BY NTP & IARC.
Effects of Overexposure:SHORT-TERM OVEREXPOSURE TO WELDING FUMES MAY
RESULT IN DISCOMFORT SUCH AS: DIZZINESS, NAUSEA OR DRYNESS OR
IRRITATION OF NOSE, THROAT, OR EYES, TIGHTNESS IN CHEST, FEVER AND
ALLERGIC REACTIONS. LONG-T ERM OVEREXPOSURE MAY LEAD TO SIDEROSIS
(IRON DEPOSIT IN LUNGS) AND IS BELIEVED TO AFFECT PULMONARY
FUNCTIONS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:REMOVE TO FRESH AIR, OBTAIN MEDICAL ATTENTION. EMPLOY FIRST
AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED CROSS.
===================== Fire Fighting Measures =====================
Extinguishing Media:NONE SPECIFIED BY MANUFACTURER.
Fire Fighting Procedures:WELDING ARC & SPARKS CAN IGNITE COMBUSTIBLES &
FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARD Z49.1 FOR FIRE
PREVENTION DURING THE USE OF WELDING PROCEDURES.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:SEE AMERICAN STANDARD Z49.1-1983 SAFETY IN WELDING
AND CUTTING, AND THE WELDING HANDBOOK, VOL. 1, CHAPTER 9, SAFE
PRACTICES IN WELDING AND CUTTING, BOTH AVALIABLE FROM AMERICAN
WELDING SOCIETY.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE RESPIRABLE FUME RESPIRATORY OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN A CONFINED SPACE OR WHERE LOCAL EXHAUST
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED
EXPOSURE LIMITS.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST AT THE ARC TO KEEP
THE FUMES FROM THE WORKERS BREATHING ZONE AND THE GENERAL AREA.
Protective Gloves:WELDERS GLOVES.
Eye Protection:FACE SHIELD., FLASH GOGGLES, SCREENS
Other Protective Equipment:WEAR ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK CLOTHING. PROVIDE EYE WASH AND SAFETY
SHOWER.
Work Hygienic Practices:TRAIN THE WELDERS NOT TO TOUCH LIVE ELECTRICAL
PARTS AND TO INSULATE HIMSELF FROM WORK AND GROUND.
Supplemental Safety and Health
DO NOT BREATHE VAPORS OR MIST. DO NOT INGEST. READ PRECAUTIONS ON LABEL
BEFORE USE.
================== Physical/Chemical Properties ==================
HCC:N1
Appearance and Odor:ROUND.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRIMARILY OXIDES OF IRON; SECONDARY
OXIDES OF CHROMIUM, NICKEL, MAGNESIUM, SILICON & MOLYBDENUM.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY SAFE MANNER, IN FULL COMPLIANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
1100 H 1273,ALUMINUM WELDING WIRE AND ROD
| 7440-21-3
7439-89-6
7440-50-8
7439-96-5
1314-13-2
7429-90-5 |
|
1100,BARE ALUMINUM WELDING WIRE
| 7440-21-3
7439-89-6
7440-50-8
7439-96-5
1314-13-2
7439-95-4
7440-47-3
7440-32-6
7429-90-5
7440-48-4 |
|
CALCIUM HYPOCHLORITE TECHNICAL
| 22464-76-2 |
|
BRAYCO 885
| |
|
718 (4047) H 1286,ALUMINUM WELDING WIRE AND
| 7440-21-3
7439-89-6
7440-50-8
7439-96-5
1314-13-2
7439-95-4
7429-90-5 |
|
718,BARE ALUMINUM WELDING WIRE
| 7440-21-3
7439-89-6
7440-50-8
7439-96-5
1314-13-2
7439-95-4
7440-47-3
7440-32-6
7429-90-5
7440-48-4 |
|
SODIUM CHLORATE,99+%
| 7775-09-9 |
|
DESI PAK
| 1302-78-9
14808-60-7 |
|
OXALIC ACID
| 144-62-7 |
|
POTASSIUM CHLORIDE
| 7447-40-7 |
|
POTASSIUM BIPHTHALATE,2958
| 877-24-7 |
|
ACETYLENE
| 74-86-2 |
|
11106 140 SOLVENT 66/3
| 8052-41-3 |
|
RUST GONE METAL PREP
| 7664-38-2 |
|
LEAD ACETATE,TRIHYDRATE
| 6080-56-4 |
|
11106 140 SOLVENT 66/3
| 8052-41-3 |
|
PERCHLORIC ACID, 50-72%
| 7601-90-3 |
|
P243 100 POTASSIUM HYDROGEN PHTHALATE
| 877-24-7 |
|
FERROUS AMMONIUM SULFATE HEXAHYDRATE
| 7783-85-9 |
|
TT-T-548D REPLACEMENT FOR TOLUENE
| 110-19-0
142-82-5
108-87-2
108-88-3
110-82-7 |
|
MAGNESIUM ACETATE
| 76030-84-7 |
|
SUCROSE
| 57-50-1 |
|
POTASSIUM HYDRATE,P-250
| 1310-58-3
7732-18-5 |
|
RODENTICIDE, ZINC PHOSPHIDE, POWDER
| 1314-84-7
28300-74-5 |
|
CARBON DIOXIDE, REFRIGERATED LIQUID
| 124-38-9 |
|
TT-T-548D REPLACEMENT FOR TOLUENE
| 110-19-0
142-82-5
108-87-2
108-88-3
110-82-7 |
|
TT-T-548D REPLACEMENT FOR TOLUENE
| 110-19-0
142-82-5
108-87-2
108-88-3
110-82-7 |
|
PR-615-HF
| |
|
VIZZENE A
| 108-86-1
131-54-4 |
|
EC-801 ACCELERATOR (CLASS A &/OR B)
| 1309-60-0
61788-32-7
1317-36-8
143-07-7
822-20-7
1330-20-7 |
|
PR-1574 AMBER, PART A
| 3077-13-2 |
|
CPS255675 HYDRAULIC OIL AW ISO 32
| |
|
1300324 GASKET
| 12001-29-5 |
|
STORAGE BATTERY
| 1314-41-6
7439-92-1 |
|
PAINT EPOXY POLYAMIDE EXT TOPCOAT WHITE 278
| 71-36-3 |
|
PIGMENTED EPOXYU SOLUTION FOR 152 WHITE 2788
| 64742-95-6
14807-96-6 |
|
PAINT EPOXY POLYAMIDE, EXT TOPCOAT BLACK FO
| 71-36-3 |
|
PIGMENTED EPOXY SOLUTION FOR 153 RO=1.8 BLACK
| 64742-95-6
14807-96-6 |
|
PAINT EPOXY POLYAMIDE, EXT TOPCOAT BLACK F
| 71-36-3 |
|
PIGMENTED EPOXY SOLUTION FOR 153 RO=1.8 BLACK
| 64742-95-6
14807-96-6 |
|
PAINT EPOXY POLYAMIDE FOR 156 COMP A RED 20109
| 71-36-3
14807-96-6 |
|
RED 20109 PIGMENTED EPOXY SOLUTION FOR 156
| 64742-95-6
14807-96-6
68855-54-9 |
|
PAINT, EPOXY POLYAMIDE FOR 156 COMP A RED
| 71-36-3
14807-96-6 |
|
RED 20109 PIGMENTED EPOXY SOLUTION FOR 150 COMP B
| 64742-95-6
14807-96-6
68855-54-9 |
|
HI-ALLOY
| 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
112945-52-5
13463-67-7
9004-34-6 |
|
PRIMER CTG C/N ALKYD ID 727002
| 8030-30-6
78-83-1
13530-65-9
110-19-0
108-88-3
142-82-5
110-54-3
67-63-0
9004-70-0
78-93-3 |
|
FORMULA 925
| |
|
WAKEFIELD W-120
| 1314-13-2
9016-00-6 |
|
ATON ARC COVERED LOW HYDROGEN ELECTRODES.
| 7439-89-6
7440-47-3
7440-21-3
7440-50-8
6834-92-0
1317-65-3
13463-67-7
7439-96-5
7440-02-0
7439-98-7
1312-76-1
7789-75-5
68476-25-5
14940-68-2 |
|
ATON ARC COVERED LOW HYDROGEN ELECTRODES
| 7439-89-6
7440-47-3
7440-21-3
7440-50-8
6834-92-0
1317-65-3
13463-67-7
7439-96-5
7440-02-0
7439-98-7
1312-76-1
7789-75-5
68476-25-5
14940-68-2 |
|
|