===================== Product Identification =====================
MSDS NAME:237BHR36, DEVGRIP 237HR 595A36076 DARK GRAY
NIIN:00N028336
MSDS Number: BMSHK
=== Responsible Party ===
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
City:LOUISVILLE
State:KY
ZIP:40207
Country:US
Info Phone Num:502-897-9861
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:1HK86
=== Contractor Identification ===
Company:DEVOE COATINGS CO
Address:4000 DUPONT CIRCLE
Box:7600
City:LOUISVILLE
State:KY
ZIP:40207-4802
Country:US
Phone:502-897-9861
CAGE:1HK86
============= Composition/Information on Ingredients =============
Name:OTHER PREC:BUILD-UP OF VAPS BY MAINTAINING CONT FLOW OF
FRESH AIR. DO NOT STORE ABOVE 120F/NEAR FIRE/OPEN FLAME.(ING 16)
RTECS #:9999999ZZ
Name:ING 15: STORE LRG QTYS IN BUILDINGS TO COMPLY W/OSHA
1910.106. KEEP CNTNR CLSD WHEN NOT IN USE. DO NOT TRANSFER (ING 17)
RTECS #:9999999ZZ
Name:ING 16: CONT TO BOTTLES/OTHER UNLBLD CNTNRS. DO NOT REUSE
EMPTY CNTNRS. IF MATL IS PART OF TWO COMPONENT PROD, (ING 18)
RTECS #:9999999ZZ
Name:ING 17:THEN MIX OF BASE & CONVERTER PORTIONS WILL HAVE HAZ
OF BOTH COMPONENTS. OBSERVE ALL APPLIC PREC. WARNING:(ING 19)
RTECS #:9999999ZZ
Name:ING 18: PROD CONT CHEM KNOWN TO STATE OF CALIFORNIA TO
CAUSE CANCER, BIRTH DEFECTS/OTHER REPROD HARM (PROPOSITION 65).
RTECS #:9999999ZZ
Name:RESP PROT: CHEM/MECH FILTER DESIGNED TO REMOVE COMBINATION
OF PARTICULATES & VAP. WHEN USED IN CONFINED AREAS, (ING 21)
RTECS #:9999999ZZ
Name:ING 20: WEAR NIOSH/MSHA APPRVD AIR SUPP RESP/USE HOODS. USE
NIOSH/MSHA APPRVD RESP WHEN FLAME CUTTING, WELDING, (ING 22)
RTECS #:9999999ZZ
Name:ING 21: BRAZING AND SANDING MATERIAL COATED WITH THIS
PRODUCT.
RTECS #:9999999ZZ
Name:VENT:STDS IN MIX,APPLIC & CURING AREAS & TO REMOVE SANDING
DUSTS OF DRIED COATINGS & DECOMP PRODS DURING WELDING(ING 24)
RTECS #:9999999ZZ
Name:ING 23: & FLAME CUTTING ON SURFS COATED W/PROD. VAPS MAY
SPREAD LONG DISTANCES. PVNT BUILD-UP BY REMOVING HEAVY (ING 25)
RTECS #:9999999ZZ
Name:ING 24: SOLVENT VAPORS FROM LOWER LEVELS OF WORK AREA.
ELIMINATE ALL IGNITION SOURCES.
RTECS #:9999999ZZ
Name:SPILL PROC: NON-SPARKING TOOLS. STORE IN CLOSED CONTAINER
UNTIL PROPERLY DISPOSED OF.
RTECS #:9999999ZZ
Name:EPOXY RESIN
Fraction by Wt: 10%
Name:TITANIUM OXIDE; (TITANIUM DIOXIDE). LD50: (ORAL,RAT) >24000
MG/KG.
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:SILICA (TYPE NOT SPECIFIED)
Fraction by Wt: 20%
OSHA PEL:20 MPPCF (MFR)
ACGIH TLV:5 MG/M3 (MFR)
Name:SILICA GEL; (FUMED SILICA)
CAS:63231-67-4
RTECS #:VV7340000
Fraction by Wt: <5%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3 TDUST
Name:AGGREGATE
Fraction by Wt: 40%
Name:SLAG
Fraction by Wt: 5%
Name:BUTYL ALCOHOL; (N-BUTYL ALCOHOL) (SARA III). VP: 5.9.
LD50: (ORAL,RAT)2.5 GM/KG.
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: <5%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:XYLENE. VP: 6. LD50: (ORAL,RAT) >5 GM/KG.
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 10%
OSHA PEL:100 PPM;150 PPM STEL
ACGIH TLV:100 PPM;150 PPM STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:HIGH FLASH NAPHTHA. VP: 10. LD50: (ORAL,RAT)>5 GM/KG.
CAS:64742-95-6
Fraction by Wt: <5%
OSHA PEL:100 PPM
Name:SUPP DATA: MAY IGNIT. DURING EMER CNDTNS OVEREXP TO DECOMP
PROD MAY CAUSE HLTH HAZ. SYMP MAY NOT BE IMMED (ING 11)
RTECS #:9999999ZZ
Name:ING 10: APPARENT. OBTAIN MEDICAL ATTENTION.
RTECS #:9999999ZZ
Name:FIRST AID PROC: INGEST: CONSULT PHYS IMMED. DO NOT INDUCE
VOMIT. ASPIR OF VOMITUS CAN CAUSE CHEM PNEUM WHICH CAN(ING 13)
RTECS #:9999999ZZ
Name:ING 12: BE FATAL. NOTICE: INTENTIONAL MISUSE BY
DELIBERATELY CONC AND INHALING CONTENTS MAY BE HARMFUL OR FATAL.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:SEE INGREDIENTS 2, 7, 8 & 9.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:(ACUTE) INHAL:IRRIT OF RESP TRACT;
HDCH, NAUS, DIZZ, WEAK & FATIGUE. EXTREME EXPOS CAN RSLT IN UNCON &
EVEN RESP ARREST. SKIN/EYE: CAUSES EYE & SKIN IRRIT. MAY BE HARMFUL
IF ABSORB THRU SKIN. INGEST: CAN CAUSE STOMACH &/OR INTESTINAL
IRRIT, NAUS, VOMIT & DIARR. (CHRONIC) REPORTS HAVE ASSOCIATED RPTD
& (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA: GROUP 2A (IARC); GROUP 2 NTP.
Effects of Overexposure:HLTH HAZ: PRLNGD OCCUP OVEREXP TO SOLV W/PERM
BRAIN & NERV SYS DMG. PROLONGED OR REPEATED BRTHG OF SPRAY MIST
AND/OR SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE DUST DISEASE
OF LUNGS.
Medical Cond Aggravated by Exposure:NONE, WHEN USED IN ACCORDANCE WITH
SAFE HANDLING AND USE INFORMATION.
======================= First Aid Measures =======================
First Aid:INHAL: IF YOU EXPERIENCE DFCLTY IN BRTHG, LEAVE AREA TO
OBTAIN FRESH AIR. IF CONT DFCLTY IS EXPERIENCED, SUMMON MED
ASSISTANCE IMMED. IF BRTHG CEASES, RESTORE USING APPRVD CPR
TECHNIQUES & SUMMON MED HELP IMMED. EYE: FLUSH IMMED W/LRG AMTSOF
H*2O FOR AT LEAST 15 MIN. GET MED ASSISTANCE. SKIN: WASH AFFECTED
AREAS W/SOAP & H*2O. REMOVE SOILED CLTHG. GET MED ASSISTANCE IF
IRRIT PERSISTS. (ING 12)
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:85.0F,29.4C
Lower Limits:1%
Extinguishing Media:USE CO*2 DRY CHEMICAL, FOAM, OR OTHER NFPA APPROVED
METHOD FOR TREATING CLASS B FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT
EQUIP.SUMMON PROFESSIONAL FIREFIGHTERS. H*2O SPRAY MAY BE INEFT. IF
H*2O USED, FOG NOZ PREFERABLE. IF (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD.ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS & FLAME. VAPS MAY CAUSE FLASH FIRE. VAPS
MAY IGNITE EXPLO. VAPS MAY SPREAD LONG (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE ALL SOURCES OF IGNIT (FLAMES, HOT
SURFS, & ELEC, STATIC/FRICTIONAL SPARKS). PVNT BRTHG OF VAPS. VENT
AREA. BEFORE ATTEMPTING CLEAN-UP, REFER TO HAZ CAUTN INFORM IN
OTHER SECTIONS ON MSDS . CONT SPILLED MATL & REMOVE W/INERT ABSORB
&(ING 14)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND
FLAMES. DO NOT SMOKE.
Other Precautions:EXTING ALL PILOT LIGHTS & TURN OFF ALL SOURCES OF
IGNIT INCL HEATERS, FANS & OTHER NON-EXPLO-PROOF ELEC EQUIP, DURING
USE & UNTIL ALL VAPS ARE GONE. VAPS MAY IGNITE EXPLO. VAPS MAY
SPREAD LONG DISTANC ES & BEYOND CLSD DOORS. PVNT (ING 15)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR/OPEN AREAS,&
DURING SANDING/GRINDING OPER,USE NIOSH/MSHA APPRVD MECH FILTER RESP
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY & SANDING DUST.
WHEN USED IN RESTRICTED V ENT AREAS,WEAR NIOSH/MSHA APPRVD(ING 20)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP AIR CONTAM CONC BELOW CURRENT APPLIC SAFETY & HLTH (ING 23)
Protective Gloves:SOLVENT IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:SOLVENT IMPERMEABLE CLOTHING AND BOOTS TO
PREVENT SKIN CONTACT ARE RECOMMENDED.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC: EXPOS TO FIRE/EXTREME HEAT, H*2O SHD BE USED TO COOL
CLSD CNTNRS & PVNT PRESS BUILD UP/POSS AUTO-IGNIT. EXPLO HAZ:
DISTANCES & BEYOND CLSD DOORS. DUE TO PRESS BUILD-UP, CLSD CNTNRS
EX POS TO EXTREME HEAT MAY EXPLO. NEVER USE WELDING/CUTTING TORCH
ON/NEAR CNTNR (EVEN EMPTY) AS PROD/ITS RESIDUE (ING 10)
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:240F,116C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:1.98
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:32.68
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY CAUSE TOXIC FUMES WHEN HEATED TO
DECOMPOSITION. FUMES MAY CONTAIN CARBON MONOXIDE, CARBON DIOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SN60 399
| 7439-92-1
7440-31-5
8050-09-7 |
|
SN60 366
| 8050-09-7
7439-92-1
7440-31-5 |
|
SN60 WRAP3 (PLUS)
| 7439-92-1
7440-31-5
8050-09-7 |
|
SN60 WRMAP3 (PLUS)
| 7439-92-1
7440-31-5
8050-09-7 |
|
SN60 362B 2 CORE
| 7439-92-1
7440-31-5
8050-09-7 |
|
80116 MARINE POLISH
| 8008-20-6
110-91-8 |
|
80100 MARINE POLISH
| 8008-20-6
110-91-8 |
|
LAVAX MACHINERY ENAMEL, 23-76
| 14808-60-7
1335-30-4
471-34-1
64742-88-7
64742-48-9
64742-88-7
13463-67-7 |
|
CAUSTIC SODA-BEADS
| 1310-73-2
497-19-8
7647-14-5 |
|
AO 2000 EPOXY ADHESIVE, PART A
| 112945-52-5
3101-60-8
7631-86-9 |
|
AO 2000 EPOXY ADHESIVE, PART B
| 112945-52-5
7631-86-9
111-40-0 |
|
SPEED DEMON LATEX, 0736
| 64742-88-7
1317-65-3
107-21-1
85-68-7 |
|
SPEED DEMON LATEX, 0737
| 64742-88-7
1317-65-3
107-21-1
85-68-7 |
|
THE CLEANER
| 139-08-2
6834-92-0 |
|
76005-A INTERIOR YELLOW, WONDERTINT (SUPP D
| |
|
76008-D PHTHALO GREEN, WONDERTINT (SUPP DAT
| |
|
76011-E PHTHALO BLUE, WONDERTINT (SUPP DATA
| |
|
76026-H FAST RED, WONDERTINT CONCENTRATED (
| |
|
76023-K PERMANENT ORANGE, WONDERTINT (SUPP
| |
|
9555S, CRONAR REDUCERS/ADDITIVES/INITIATORS
| 123-86-4
141-78-6
67-63-0
99-76-3
64742-89-8
1330-20-7 |
|
MOBILGARD 412
| |
|
RM 270 A
| |
|
BUTTERCUT CUTTING COMPOUND, 5041
| 8016-28-2 |
|
BUTTERCUT CUTTING COMPOUND, 5042
| 8016-28-2 |
|
BUTTERCUT CUTTING COMPOUND, 5043
| 8016-28-2 |
|
BURKEPOXY MV BASE
| 25068-38-6
68609-96-1
106-89-8 |
|
BURKEPOXY MV SETTING AGENT
| 112-57-2 |
|
90-1 WHITE
| 28553-12-0
108-10-1
123-86-4
108-21-4
78-83-1
628-63-7
78-93-3
67-63-0
64742-48-9
108-88-3
111-76-2 |
|
FREEMAN 90-1 LF YELLOW
| 67-63-0
108-10-1
64742-48-9
108-88-3
78-83-1
28553-12-0
123-86-4
108-21-4
78-93-3
628-63-7 |
|
15250, NICKEL CHLORIDE LIQUID
| 7718-54-9 |
|
5161, C/M ON TARGET AEROSOL
| 75-71-8 |
|
ACTIVATOR BA-45
| 80-52-4
90-72-2
25338-55-0
108-95-2
50-00-0 |
|
SUPER HP 20W-50
| 68457-79-4
142-71-2
7440-50-8
7440-66-6 |
|
BILGE CLEANER, 80500
| 67-63-0
34590-94-8
10213-79-3 |
|
BILGE CLEANER, 80532
| 67-63-0
34590-94-8
10213-79-3 |
|
PRO-LINE PL-3 RAW UMBER
| 111-46-6
1333-86-4 |
|
KT PAINT WHITE
| 123-86-4
78-83-1
8032-32-4
111-76-2
67-63-0 |
|
KT PAINT YELLOW
| 123-86-4
78-83-1
8032-32-4
111-76-2
67-63-0
7758-97-6
64475-85-0 |
|
KT PAINT RED
| 123-86-4
78-83-1
8032-32-4
111-76-2
67-63-0
7758-97-6
64475-85-0
7440-43-9 |
|
AS 509, WATER-BASED SPRAY PAINT
| 78-92-2
67-63-0
115-10-6
71-36-3
111-76-2 |
|
AS 514, WATER-BASED SPRAY PAINT
| 111-76-2
71-36-3
78-92-2
67-63-0
115-10-6 |
|
WOVEN CLUTCH FACING, M7796
| 12001-29-5
64741-84-0
1317-36-8 |
|
22-301 SLIKTITE MUD-MEDIUM
| 8008-20-6
14807-96-6
68527-24-2
12001-26-2
14808-60-7 |
|
C500, CANTEX 99 CLEAR
| 9003-22-9
78-93-3
109-99-9
108-94-1 |
|
FAST DRY WATERSOL BLOCKOUT
| 75-09-2
67-56-1 |
|
237BHR36, DEVGRIP 237HR 595A36076 DARK GRAY
| 13463-67-7
63231-67-4
71-36-3
1330-20-7
64742-95-6 |
|
TRIBOLUBE-L6 OIL
| |
|
5376, TRICHLOROETHYLENE
| 79-01-6 |
|
00893, CELSIUS 60
| |
|
MIL-PRF--2105 E GEAR OIL 80 W-90 MG 2067
| 64741-88-4 |
|
|