===================== Product Identification =====================
MSDS NAME:AS1098 PART A, EPOXY RESIN
NIIN:00N000444
MSDS Number: BCFLZ
=== Responsible Party ===
Company:HYSOL DIVISION, THE DEXTER CORPORATION
Emergency Phone Num:(716) 372-6300
CAGE:14347
=== Contractor Identification ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
Company:HYSOL DIVISION, THE DEXTER CORPORATION
Box:312
CAGE:14347
============= Composition/Information on Ingredients =============
Name:N-BUTYL GLYCIDYL ETHER (BGE)
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: 8.0%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293
Name:ETHYLENE GLYCOL (SARA III)
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 0.50%
OSHA PEL:C 50 PPM
ACGIH TLV:C 50 PPM,VAPOR; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
Effects of Overexposure:NO ACUTE SYMPTOMS EXPECTED. A SENSITIZER.
PROLONGED/REPEATED SKIN CNTCT MAY CAUSE RASH.
======================= First Aid Measures =======================
First Aid:FLUSH SKIN/EYE CNTCT W/PLENTY OF WATER. THEN WASH SKIN
THOROUGHLY W/SOAP & WATER. REMOVE CONTAM CLOTHING. WASH BEFORE
REUSE.
===================== Fire Fighting Measures =====================
Flash Point:200F TOC
Lower Limits:0.4
Upper Limits:1.3
Extinguishing Media:CARBON DIOXIDE, DRY CHEM, FOAM FOR LG FIRES
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
================== Accidental Release Measures ==================
Spill Release Procedures:COVER W/ABSORBENT MATL, THEN SCRAPE UP &
TRANSFER TO METAL CNTNR. OBSERVE FLAMMABLE CHARACTERISTICS OF
SOLVENTS, IF USED TO WIPE UP STICKY RESIDUE.
====================== Handling and Storage ======================
Handling and Storage Precautions:MAY CAUSE SKIN SENSITIZATION & OTHER
ALLERGIC RESPONSES
Other Precautions:USE ONLY W/ADEQUATE VENT, PARTICULARLY IF HEATED OR
SPRAYED. AVOID SKIN/EYE CNTCT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR-SUPP MASK IN CONFINED AREAS
Ventilation:LOCAL EXH PREFERRED, MECH EXH ACCEPTED
Protective Gloves:PLASTIC/RUBBER
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:SAFETY SHOWER/EYE BATH. USE COVERALLS OR
APRON.
Supplemental Safety and Health
PART 1 OF A 2 PART PRODUCT
================== Physical/Chemical Properties ==================
NRC/State Lic Num:NA
Boiling Pt:B.P. Text:284F
Vapor Pres:2.0
Vapor Density:3.8
Spec Gravity:1.30
Evaporation Rate & Reference:>1.0 BUAC
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY PASTE, CHARACTERISTIC SWEET ODOR
Percent Volatiles by Volume:15.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AMINES, MERCAPTANS & BASES
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES & OTHER
ORGANICS
Conditions to Avoid Polymerization:EXOTHERMS WHEN CURED
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE OR LANDFILL IAW LOCAL, STATE, FED
REG. SOLIDIFY BY MIXING W/PORTION OF EPOXY HARDENER BEFORE LANDFILL
BURIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|