===================== Product Identification =====================
MSDS NAME:DRYDENE UNIVERSAL TRACTOR FLUID
NIIN:00F022257
MSDS Number: BNDYV
=== Responsible Party ===
Company:DRYDEN OIL COMPANY
Address:9300 PULASKI HIGHWAY
City:BALTIMORE
State:MD
ZIP:21220
Country:US
Info Phone Num:301 574-5000 OR 800-777-1466
Emergency Phone Num:301 574-5000 OR 800-777-1466
CAGE:40310
=== Contractor Identification ===
Company:DRYDEN OIL CO INC
Address:9300 PULASKI HWY
Box:City:BALTIMORE
State:MD
ZIP:21220
Country:US
Phone:301-574-5000
CAGE:40310
============= Composition/Information on Ingredients =============
Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-REFINED HEAVY
PARAFFINIC, LUBRICATING OIL BASE STOCK
CAS:64741-88-4
RTECS #:PY8040500
Fraction by Wt: >85%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
Name:ADDITIVES
Fraction by Wt: <15%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYE: SLIGHT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYE: IRRITATION.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH W/CLEAR WATER FOR 15 MINS. SKIN: WASH THOROUGHLY
W/SOAP & WATER. INGESTION: DON'T INDUCE VOMITING. INHALATION: IF
OVERCOME BY VAPOR FROM HOT PRODUCT, IMMEDIATELY REMOVE FROM
EXPOSURE & CALL A PHYSICIAN. ADMINISTER OXYGEN, IF AVAILABLE. IF
OVER-EXPOSED TO OIL MIST, REMOVE FROM FURTHER EXPOSURE UNTIL
EXCESSIVE MIST OIL CONDITION SUBSIDES.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:380F
Lower Limits:0.9%
Upper Limits:7%
Extinguishing Media:FOAM, WATER SPRAY (FOG), DRY CHEMICAL, CO2 &
VAPORIZING LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:USE WATER TO KEEP FIRE-EXPOSED CONTAINERS
COOL. USE SUPPLIED AIR BREATHING EQUIPMENT FOR ENCLOSED OR CONFINED
SPACES OR AS OTHERWISE NEEDED.
Unusual Fire/Explosion Hazard:THEY MAY EXPLODE & CAUSE INJURY OR DEATH.
================== Accidental Release Measures ==================
Spill Release Procedures:RECOVER FREE PRODUCT. ADD SAND, EARTH, OR
OTHER SUITABLE ABSORBENT MATERIAL TO THE SPILL AREA. OPEN ALL
WINDOWS & DOORS. KEEP PRODUCT OUT OF SEWERS & WATERCOURSES BY
DIKING OR IMPOUNDING.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS & STORAGE CONTAINERS
CLOSED WHEN NOT IN USE. DON'T STORE NEAR HEAT, SPARKS, FLAME. AVOID
PROLONGED OR REPEATED SKIN CONTACT.
Other Precautions:MINIMIZE BREATHING VAPORS. "EMPTY" CONTAINERS RETAIN
RESIDUE (LIQUID/VAPOR) & CAN BE DANGEROUS. DON'T
PRESSURIZE/CUT/WELD/BRAZE/SOLDER/DRILL/GRIND/EXPOSE SUCH CONTAINERS
TO HEAT/FLAME/SPARKS/OTHER SOU RCES OF IGNITION/CAUSE INJURY OR
DEATH.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NO SPECIAL REQUIREMENTS UNDER ORDINARY
CONDITIONS OF USE & W/ADEQUATE VENTILATION.
Ventilation:NO SPECIAL REQUIREMENTS UNDER ORDINARY CONDITIONS OF USE.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SPLASH GOGGLES OR FACE SHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:-86F
Vapor Pres:NEGLIGIBLE
Vapor Density:>AIR
Spec Gravity: 0.8820
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:<0.1%
Appearance and Odor:CLEAR LIQUID, AMBER COLOR MILD, BLAND PETROLEUM
ODOR.
Percent Volatiles by Volume:NEGL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, SPARKS, PILOT LIGHTS, STATIC
ELECTRICITY, OPEN FLAME, SPARKS OR OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:CO & OTHER UNIDENTIFIED ORGANIC
COMPOUNDS, FUMES, SMOKE, SULFUR OXIDES, ALDEHYDES & OTHER
DECOMPOSITION PRODUCTS.
==================== Disposal Considerations ====================
Waste Disposal Methods:ASSURE CONFORMITY W/ALL APPLICABLE REQULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|