Spill Release Procedures:MFR STATES - DOES NOT USUALLY APPLY TO
AEROSOLS - ALLOW TO EVAPORATE W/GOOD VENTILATION.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE AEROSOL CANS ABOVE 120F.
DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.
Other Precautions:DO NOT SPRAY INTO OPEN FLAME.
Ventilation:ADEQUATE VENTILATION AT SITE OF USE
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
VAPOR PRESSURE & VAPOR DENSITY MEASURED AT 77F.
Boiling Pt:B.P. Text:117.6F
Vapor Pres:334
Vapor Density:2.9
Spec Gravity:1.570
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS LIQ, SLIGHT ETHERIAL ODOR
Percent Volatiles by Volume:100
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
HOT REACTIVE METALS SUCH AS MOLTEN ALUMINUM
Hazardous Decomposition Products:THERM DECOMP MAY YIELD
HALOGENS,HALOGEN ACIDS, CARBONYL ACID
Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.
DISPOSE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.