===================== Product Identification =====================
MSDS NAME:TT-E-489H Y17, B489.88
NIIN:00-298-2300
MSDS Number: BNKQJ
=== Responsible Party ===
Company:DAVLIN PAINT CO INC
Address:700 ALLSTON WAY
Box:2308
City:BERKELEY
State:CA
ZIP:94702
Country:US
Info Phone Num:510-848-2863
Emergency Phone Num:510-848-2863
Preparer's Name:PATRICIA SHAW
CAGE:3Z268
=== Contractor Identification ===
Company:DAVLIN PAINT CO INC
Address:700 ALLSTON WAY
Box:2308
City:BERKELEY
State:CA
ZIP:94702
Country:US
Phone:510-848-2863
CAGE:3Z268
============= Composition/Information on Ingredients =============
Name:N-BUTYL ACETATE (VAPOR PRESSURE 8.7 MM HG @ 68 F)
CAS:123-86-4
RTECS #:AF7350000
Fraction by Wt: 5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:150 PPM/200 STEL
ACGIH TLV:150 PPM/200 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:XYLENE (VAPOR PRESSURE 11.0 MM HG @ 77 F) (SARA 313)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 6%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:BARIUM SULFATE (SARA 313)
CAS:7727-43-7
RTECS #:CR0600000
Fraction by Wt: 10%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:SOLVENT NAPTHA (VAPOR PRESSURE 10.3 MM HG @ 100 F)
CAS:64742-95-6
Fraction by Wt: 20%
Other REC Limits:25 PPM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EXPOSURE TO LIQUIDS, VAPORS, MISTS OR
FUMES SHOULD BE MINIMIZED. CHRONIC EXPOSURE MAY CAUSE DAMAGE TO THE
CENTRAL NERVOUS SYSTEM, RESPIRATORY SYSTEM, LUNGS, EYES, SKIN,
GASTROINTESTINAL TRACT, LIVER, SPLEEN AND KIDNEYS.
Effects of Overexposure:INHAL: NASAL/RESP
IRRIT/DIZZINESS/WEAKNESS/FATIGUE/NAUSEA/HEADACHE. HIGH CONC-CNTRL
NERV SYS DEPRESS. EYE: SEVERE IRRIT/TEARING/REDNESS/BLURRED VISION.
SKIN: MOD IRRIT/DEFATTING/DERMITITIS. INGEST: IR RIT OF DIGESTIVE
TRACT/SIGNS OF CNTRL NERV SYS DEPRESS. ASPIRATION HAZARD. LUNG
INFLAMMATION DURING SWALLOWING/VOMITING.
Medical Cond Aggravated by Exposure:RESPIRATORY TRACT IRRITATION,
DERMITITIS, NAUSEA.
======================= First Aid Measures =======================
First Aid:EYE: FLUSH W/WTR FOR 15 MINS, LIFT LIDS. GET MED AID. SKIN:
RMV CONTAM CLOTHES, WASH W/SOAP & WATER. IF IRRIT PERSISTS, SEE DR.
INHAL: MOVE TO FRESH AIR. APPLY ART RESP/ADMIN OXYGEN IF NEEDED.
CONSULT DR. INGEST: GIVE WATER OR MILK TO DRINK AND PHONE FOR MED
ADVICE. DO NOT MAKE PERSON VOMIT UNLESS DIRECTED BY MED PERSONNEL.
IF MED ADVICE CANNOT BE OBTAINED, TAKE THE PERSON TO NEAREST EMER
HOSPITAL
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:76 F
Lower Limits:1.0
Upper Limits:7.6
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE EXTINGUISHERS MADE FOR NFPA FLAMM LIQ
FIRE. WTR MAY BE INEFFECT, BUT USE AS FOG FOR COOLING. ALL EXPOSED
TO PROD SHOULD WEAR FULL PROTECT CLOTH/BREATH APP.
Unusual Fire/Explosion Hazard:VAPORS FORM EXPLO MIX W/AIR BETWEEN
LWR/UPR EXPLOS LIMITS-CAN BE IGNITED. CLSD CNTNRS MAY EXPLODE
W/EXTREME HEAT. ISOLATE FROM HEAT/ELECT SPARKS/OPEN FLAME.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE ALL NON-ESSENTIAL PERSONNEL. REMOVE
ALL IGNITION SOURCES. VENTILATE THE AREA. PROVIDE APPROPRIATE
PROTECTIVE EQUIPMENT. DIKE AROUND THE SPILL AREA. COVER SPILL WITH
INERT ABSORBANT AND TRANSF ER USING NON-SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE BELOW 80F IN CLSD ORIGINAL
CNTNR. AVOID FLAME/HIGH TEMP. DO NOT STORE NEAR OXIDIZING
AGENTS/ACIDS. VAPOR MAY TRAVEL TO SOURCE OF IGNIT/FLASHBACK
Other Precautions:DONT INGEST, AVOID PROLONGED OR REPEATED INHALATION
OF HEATED VAPORS/SPRAY MIST. KEEP AWAY FROM HEAT. GROUND ALL
CONNECTIONS, CONTAINER, ETC. WHEN POURING OR TRANSFERING TO
MINIMIZE STATIC ELECTRICITY . USE NON-SPARKING TOOLS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED EQUIPMENT WHEN AIRBORN
EXPOSURE LIMITS ARE EXCEEDED. CONSULT RESPIRATOR MANUFACTURER TO
DETERMINE APPROPRIATE EQUIPMENT FOR GIVEN APPLICATION. HIGH AIRBORN
CONCENTRATIONS MAY R EQUIRE THE USE OF A SUPPLIED-AIR*
Ventilation:PROVIDE SUFFICIENT VENT TO CONTROL EXPOSURE LEVELS BELOW
AIRBORN EXPOSURE LIMITS. VENT EQUIP MUST BE EXPLOSION PROOF.
Protective Gloves:CONSULT MFR-DETERMINE APPROPRIATE TYPE.
Eye Protection:CHEM SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:IMPERMEABLE APRONS AND PROTECTIVE CLOTHING.
THE USE OF HEAD CAPS WHENEVER POSSIBLE IS STRONGLY RECOMMENDED.
Work Hygienic Practices:AFTER USING, WASH BEFORE EATING, TOILETING OR
SMOKING.
Supplemental Safety and Health
*RESPIRATOR OR A SELF-CONTAINED BREATHING APPARATUS.
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:259-315 F
Vapor Density:> THAN AIR
Spec Gravity:1.2 (H2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:NOT WATER SOLUBLE.
Appearance and Odor:PIGMENTED LIQUID. SOLVENT ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:DO NOT EXPOSE TO HEAT OR IGNITION SOURCES.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
DIOXIDE AND/OR MONOXIDE, LOW MOLEULAR WEIGHT HYDROCARBONS AND
ORGANIC ACIDS.
Conditions to Avoid Polymerization:DO NOT EXPOSE TO HEAT OR IGNITION
SOURCES.
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP OUT OF DRAINS, SEWERS AND WATERWAYS.
DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
L5793 LITTON, THEMALOX 995, BD-995, BERLOX, ALSIMAG 754
| 1304-56-9 |
|
CARBON STEEL SHOT OR GRIT ABRASIVE
| 1309-37-1
7439-96-5
1333-86-4
7440-21-3 |
|
H-PACK STAIN (WRIGHT, WRIGHT GIEMSA)
| 67-56-1 |
|
5972 MICROTAINER BRAND TUBES
| |
|
PARA-PAK CON-TRATE MUCOPENIX REAGENT A
| 9002-93-1 |
|
PRISMA UNIVERSAL BOND 3 ADHESIVE
| 111-30-8 |
|
PRISMA UNIVERSAL BOND 3 PRIMER
| 64-17-5 |
|
810 9043; 807 4585 EKTAPRINT K TONER
| 25767-47-9
1333-86-4 |
|
EKTAPRINT K DEVELOPER
| 1333-86-4
7439-89-6 |
|
EATON'S ALL WEATHER BAIT BLOCKS RODENTICIDE
| 82-66-6 |
|
LIQUID GOLD WAX AND FLOOR FINISH REMOVER
| |
|
HAND CLEANER: WATERLESS
| |
|
BA-207/U CARBON/ZINC DRY BATTERY
| 7439-97-6 |
|
815555 CINE COLOR BLEACH & REPLENISHER, PA
| 13746-66-2
7757-82-6
7647-15-6
7757-82-6 |
|
NEA-1614 SEALANT
| 8007-45-2
61789-28-4
108-05-4 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
UNLEADED,00365
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
LINSEED OIL,BOILED,A-A-371
| |
|
BA-421/U ZINC/CARBON BATTERY
| 1310-58-3
1313-13-9
7440-66-6
7439-97-6 |
|
C132 FIXER & REPLENISHER, PART A; 176-0000
| 7783-18-8
7757-83-7
64-19-7
7732-18-5 |
|
C132 FIXER & REPLENISHER, PART B (HARDENER)
| 10043-01-3 |
|
ALKYD SEMI GLOSS ENAMEL
| 8032-32-4 |
|
30 XHD
| 64742-65-0 |
|
CLEANING COMPOUND, SOLVENT
| 75-09-2
8052-41-3
127-18-4 |
|
DOW CORNING 4 COMPOUND
| |
|
FRESH PARA BLOCKS AND CRYSTALS
| 106-46-7 |
|
JET FUEL JP-4
| |
|
JET FUEL JP-4
| |
|
LA 2889
| 142-82-5
8032-32-4
64-17-5 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
00365 TEXACO UNLEADED GASOLINE
| 71-43-2
108-88-3
100-41-4
1330-20-7
95-63-6
1634-04-4
8006-61-9 |
|
CARBON
| 7440-44-0 |
|
DRY CLEANING SOLVENT
| 8052-41-3 |
|
JET FUEL JP-4
| |
|
METHYL ALCOHOL,0-M-232,GR A
| 67-56-1 |
|
TT-E-487E & AMD.1 COLOR 16099, B48716099
| 64741-41-9 |
|
ENAMEL, INT DOD-E-18214B GREEN 34092
| |
|
MP-9000 UNIVERSAL ZINC CHROMATE PRIMER
| 1330-20-7
64742-47-8
71-36-3
13530-65-9 |
|
TT-E-489H Y17, B489.88
| 123-86-4
1330-20-7
7727-43-7
64742-95-6 |
|
A-12 PART A
| 25068-38-6
1317-65-3
14808-60-7
1344-28-1
1332-37-2 |
|
A-12 PART B
| |
|
TT-T-489G, TY1, CLA, 17875 WHITE
| 13463-67-7
100-41-4
8052-41-3
1330-20-7
108-88-3 |
|
TT-P-870D YELLOW
| 8030-30-6
68441-58-7
68855-54-9
71-55-6 |
|
INSULATING OIL, ELECTRICAL, TYPE 1
| |
|
MV-F TAN PN-A-012 EPOXY RESIN
| 25085-99-8
2426-08-6
112945-52-5 |
|
|