===================== Product Identification =====================
MSDS NAME:DURAD 220B TRIARYL PHOSPHATE FLUID
NIIN:00N001214
MSDS Number: BCHHG
=== Responsible Party ===
Company:FMC CORPORATION
Emergency Phone Num:(304)755-3351
CAGE:70550
=== Contractor Identification ===
Company:FMC CORP CHEMICAL PRODUCTS GROUP
Address:2000 MARKET ST.
Box:City:PHILADELPHIA
State:PA
ZIP:19103-3230
Country:US
Phone:215-200-6000
CAGE:93090
Company:FMC CORPORATION CHEMICAL GROUP
Address:2000 MARKET ST
City:PHILADELPHIA
State:PA
ZIP:19103-3230
Country:US
Phone:716-735-3765
CAGE:70550
============= Composition/Information on Ingredients =============
Name:TERT-BUTYLPHENYL PHENYL PHOSPHATE,MIXED ISOMERS (CAS NO.
68937-40-6) APPROX 100%
===================== Hazards Identification =====================
Effects of Overexposure:IRRITATION OF SKIN,EYES & RESPIRATORY
TRACT,EDEMA,DIARRHEA,POSSIBLE CHLOINESTERASE INHIBITION.
======================= First Aid Measures =======================
First Aid:INGESTION:GIVE LG AMT OF WATER & INDUCE VOMITING,CALL
PHYSICIAN.SKIN:WASH W/SOAP & WATER;REMOVE CONTAMINATED
CLOTHING.EYES:FLUSH WELL W/WATER AT LEAST 15 MIN.IF SYMPTOMS OF
CHOLINESTERASE INHIBITION A RE PRESENT,ATROPINE INJECT.IS
ANTIDOTAL.
===================== Fire Fighting Measures =====================
Flash Point:460F;238C;SETACC
Extinguishing Media:CARBON DIOXIDE;DRY CHEMICAL;WATER FOG ARE
RECOMMENDED
Fire Fighting Procedures:FULL PROTECTIVE CLOTHING & SELF-CONTAINED
BREATHING APPAR.
Unusual Fire/Explosion Hazard:SLIGHT:MAY SUPPORT COMBUSTION & DECOMP TO
GIVE OFF TOXIC PRODUCTS(EG:PHOSPHORUS OXIDES,PHENOLS)
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA.WEAR PROTECTIVE CLOTHING TO
PREVENT SKIN & EYE CONTACT.SOAK UP LIQ W/INERT ABSORBENT MATL
(EG:SAND,LIME,SAWDUST,VERMICULITE)SWEEP MATL & STORE IN SEALED
STEEL CONTAINER.LARGE SPILLS HOU LD BE DYKED & PUMPED TO SALVAGE.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY,WELL-VENTILATED
AREAS AWAY FROM FLAMMABLE MATL,HEAT & FLAME SOURCES &
FOODSTUFFS.CARBON STEEL IS PREFERRED MATL FOR CONTAINERS.
Other Precautions:MFR STATES NFPA H-F-4 CODES ARE 2-1-0.FLUID IS NOT
CORROSIVE TO GLASS OR METAL BUT BECAUSE OF ITS PLASTICIZING
PROPERTIES IT MAY SOFTEN SOME PLASTICS(VINYL-BASED RESIN,NEOPRENE &
RUBBER)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH-APPRVD RESP SELECTED FOR POTENTIAL
EXPOSURES & USE CONDITIONS.
Ventilation:RECOMMENDED ESP IF USE CONDITIONS GENERATE AEROSOLS/VAPORS
Protective Gloves:RECOMMENDED
Eye Protection:SPLASH-PROOF GOGGLES
Other Protective Equipment:APRONS OR OTHER PROTECTIVE CLOTHING IF
POSSIBLE SPLASHING
Supplemental Safety and Health
PRODUCT IS THE MAJOR INGREDIENT OF FMC CORP'S HYDRAULIC FLUID,MP-280B
CONFORMING TO MIL-H-19457C.SEE OTHER INFORMATION LISTED UNDER NS:
9150-01-113-2045/2046/2047
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:NO DATA
Spec Gravity:1.15
Evaporation Rate & Reference:NEGLIGIBLE RATE
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR,ODORLESS LIQUID
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
MOISTURE,ACIDIC OR ALKALINE CONDITIONS,VERY HIGH TEMPS.
Stability Condition to Avoid:ELEVATED TEMPERATURES,MOISTURE MAY CAUSE
SOME HYDROLYSIS
Hazardous Decomposition Products:PHENOL,ALKYL PHENOLS,ARYL PHOSPHORIC
ACID WHEN HYDROLYZED
Conditions to Avoid Polymerization:AVOID DAMAGE TO CONTAINERS.KEEP
CONTAINERS CLOSED.
==================== Disposal Considerations ====================
Waste Disposal Methods:LIMESTONE IS A SUITABLE NEUTRALIZER.FOLLOW
FED,STATE & LOCAL REGULATIONS.MFR RECOMMENDS INCINERATION
(W/AFTER-BURNER & ALKALINE SCRUBBER),APPROVED LANDFILL OF SEALED
CONTAINERS,OR SALVAGE & RECLAMATIO N.THE LATTER METHOD IS
PREFERABLE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SILVER NITRATE N/10
| 7761-88-8
7732-18-5 |
|
PRT 51 SOLVENT
| 110-80-5 |
|
ELECTROLUBE,E-40
| 110-54-3
108-10-1
108-88-3
67-63-0 |
|
FORMULA 423
| 1319-77-3
75-09-2
8030-30-6
7775-11-3 |
|
SCOTCHCAL BRAND SCREEN PRINTING INK, 3902
| 108-94-1
78-59-1
117-81-7
64742-94-5
7440-43-9 |
|
ALODINE 1000
| 7738-94-5 |
|
SILICON CARBIDE POWDER
| 409-21-2
14808-60-7 |
|
MT-281-A (SEE ALSO MT-281-B)
| 64-19-7
1336-21-6
7738-94-5
7697-37-2
7664-93-9 |
|
MT-281-B (SEE ALSO MT-281-A)
| 13746-66-2 |
|
FORMULA 423
| 75-09-2
1319-77-3
108-95-2
10588-01-9 |
|
FYRQUEL 550 HYDRAULIC FLUID
| 115-86-6 |
|
DURAD 220B TRIARYL PHOSPHATE FLUID
| |
|
VALCLENE PDF
| 76-13-1 |
|
IRON CHLORIDE
| 7705-08-0 |
|
V6 V 241,POLASOL
| 1330-20-7
111-15-9
822-06-0 |
|
ACTIVATOR BA-5
| |
|
FILM-COR
| |
|
ELECTROSTATIC SOLUTION
| 13943-58-3 |
|
INSULGRIP E-1658-B WHITE
| |
|
TI-PURE TITANIUM DIOXIDE PIGMENT, R-900
| 13463-67-7
1344-28-1
21645-51-2 |
|
TI-PURE TITANIUM DIOXIDE PIGMENT, R-901
| 13463-67-7
112945-52-5
21645-51-2 |
|
TI-PURE TITANIUM DIOXIDE PIGMENT, R-902
| 13463-67-7
112945-52-5
21645-51-2 |
|
TI-PURE R-994,TITANIUM DIOXIDE PIGMENTS
| 13463-67-7
112945-52-5 |
|
755 TONER,LIQUID TONER LTT
| 1333-86-4 |
|
EPOCAST 8155-A,TYPE III
| |
|
EPOCAST 8155-B,HARDENER
| |
|
LDC-2901 COPPER ACID D
| 7758-98-7
7664-93-9
7732-18-5 |
|
AROCLOR 1221
| 11104-28-2 |
|
P746 HIGH PURITY WHITE,INK
| 13463-67-7
8030-30-6
1302-76-7 |
|
GACOFLEX H-3011R HYPALON CTG.
| 123-86-4
108-88-3
1330-20-7
8030-30-6
71-23-8 |
|
GACOFLEX H-3012R HYPALON CTG
| 123-86-4
108-88-3
71-23-8 |
|
FREMONT 7901 LIQUID ALKALINE BASE
| 1310-58-3 |
|
LUBE-LOK 4856 DILUTE
| 78-93-3
108-88-3
1330-20-7
71-36-3
1318-93-1
7439-92-1
7440-31-5
7782-42-5
71-55-6 |
|
KINCOTE BLACK LACQUER
| 67-63-0
8030-30-6
7439-92-1
110-19-0
110-80-5 |
|
LAB-SOLVENT
| 108-88-3
78-93-3 |
|
M-COAT D PROTECTIVE COATING
| 13463-67-7 |
|
TURCO SURJ
| 497-19-8
25155-30-0
1310-73-2
7632-00-0 |
|
ACTANE 70
| 1341-49-7 |
|
MN5-1 NEUTRALIZER
| 1336-21-6
67-63-0
7732-18-5 |
|
MITROL G-ST
| 131-52-2 |
|
THURMALOX 280
| |
|
CELOTEMP 1500
| |
|
BRIGHT RED,GLOSS EPOXY BAKING INK,BE-104
| 1330-20-7
123-42-2
34590-94-8
7439-92-1
7440-47-3 |
|
WELD-ON 711
| 13463-67-7
1333-86-4
109-99-9
68-12-2 |
|
WOODLETS GERMICIDAL CLEANER (BAFIX,SLEEK)
| 8001-54-5
6834-92-0 |
|
MOBILARMA 524
| 8012-95-1 |
|
TX109 HEAD & DISC CLEANER (FREON T-P-35)
| 76-13-1
75-52-5
67-63-0 |
|
QUIK-SPRAY
| 108-88-3
75-09-2
67-64-1 |
|
QUIK-SPRAY BLOCKOUT INK
| |
|
PIMCO LEMON N WAX,LEMON LUSTRE,7P-WP 71
| |
|
|