===================== Product Identification =====================
MSDS NAME:LUPERCO AST
NIIN:00N003076
MSDS Number: BCJKM
=== Responsible Party ===
Company:LUCIDOL DIVISION,PENNWALT CORPORATION
Address:1740 MILITARY RD
City:BUFFALO
State:NY
ZIP:14240
Country:US
CAGE:HO073
=== Contractor Identification ===
Company:LUCIDOL DIVISION,PENNWALT CORPORATION
Address:1740 MILITARY RD
Box:City:BUFFALO
State:NY
ZIP:14240
Country:US
CAGE:HO073
Company:PENNWALT CORP LUCCIDOL DIVISION
Address:1740 MILITARY RD
City:BUFFALO
State:NY
ZIP:14240
Country:US
Phone:716-877-1740
CAGE:75675
============= Composition/Information on Ingredients =============
Name:BENZOYL PEROXIDE
MINIMUM 50%
CAS:94-36-0
RTECS #:DM8575000
ACGIH TLV:5MG/CUM
Name:SILICONE OIL
MAXIMUM 50%
===================== Hazards Identification =====================
Effects of Overexposure:MFR STATES NOT ESTABLISHED IN PASTE MATERIAL.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY FLUSH WITH WATER FOR 15 MIN. GET MEDICAL
ATTENTION. SKIN: WASH WITH SOAP AND WATER.
===================== Fire Fighting Measures =====================
Extinguishing Media:WATER,SPRAY, DRY CHEMICAL, FOAM
Fire Fighting Procedures:IF LG AMOUNT: EVACUATE AREA. COOL SURROUNDING
MTRL W/ WATER.
Unusual Fire/Explosion Hazard:HEAVY SMOKE MAY BE EVOLVED,IF INVOLVED IN
A FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB W/ SAND OR INERT MATERIAL SUCH AS
VERMICULITE OR PERLITE. SWEEP OR SCOOP UP AND REMOVE WITH
NON-SPARKING TOOLS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM HEAT AND SOURCES OF
IGNITION. STORE BELOW 100F; 38C.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN HAZARDOUS RESIDUES. DO
NOT RE-USE CONTAINERS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPRVD RESPIRATOR,IF REQUIRED.
Ventilation:MFR STATES USE ADEQUATE VENT.
Protective Gloves:SEE OTHER EQUIP
Eye Protection:GOG/SAFETY GLASSES
Other Protective Equipment:GLOVES: NEOPRENE,NATURAL & BUTYL
RUBBER,POLYETHYLENE.
Supplemental Safety and Health
INCOMPATIBILITY: AMINES, POLYMERIZATION ACCELERATORS.
================== Physical/Chemical Properties ==================
Spec Gravity:1.04
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE PASTE
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,STRONG ALKALIS,STRONG OXIDIZERS.(SEE SUPP DATA)
Stability Condition to Avoid:THERMAL DECOMP, CONTAMINATION, IGNITION
SOURCES.
Hazardous Decomposition Products:DECOMPOSITION PRODUCTS ARE FLAMMABLE.
==================== Disposal Considerations ====================
Waste Disposal Methods:MFR RECOMMENDS TO DISPUSE OF IMMEDIATELY.
DISPOSAL METHOD MUST BE IAW FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|