===================== Product Identification =====================
MSDS NAME:SCOTCHCAL EC800 SEALANT
NIIN:00-262-9046
MSDS Number: BPRFJ
=== Responsible Party ===
Company:MINNESOTA MINING AND MFG CO
Address:3M CTR
City:SAINT PAUL (FORMALLY IN DETROITT, MI)
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1341/612-733-1110
Emergency Phone Num:612-733-1341
Preparer's Name:C A EISENHARD
CAGE:76381
=== Contractor Identification ===
Company:CHEMICAL COMMODITIES AGENCY, INC.
Address:27447 PACIFIC STREET
Box:City:HIGHLAND
State:CA
ZIP:92346-2640
Country:US
Phone:909-864-2310
CAGE:60777
Company:MINNESOTA MINING AND MFG CO, DBA 3M
Address:3M CENTER BLDG 224-5S-04
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:866-556 5712 / 612-733-1110
CAGE:76381
============= Composition/Information on Ingredients =============
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 40-50%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM
ACGIH TLV:200 PPM/300STEL 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ACRYLONITRILE BUTADIENE POLYMER
CAS:9003-18-3
Fraction by Wt: 10-20%
Other REC Limits:NONE RECOMMENDED
Name:GLYCEROL ESTERS OF ROSIN ACIDS
CAS:8050-31-5
Fraction by Wt: 10-20%
Other REC Limits:NONE RECOMMENDED
Name:CALCIUM CARBONATE
CAS:471-34-1
RTECS #:FF9335000
Fraction by Wt: 7-13%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:10 MG/M3
ACGIH TLV:10 MG/M3
Name:METHYL ISOBUTYL KETONE (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 3-7%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:100 PPM
ACGIH TLV:50 PPM/75 STEL; 9394
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:2-BUTOXYETHANOL PHOSPHATE
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
Name:CALCIUM ALUMINUM SILICATE
CAS:1327-39-5
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
Name:TITANIUM DIOXIDE
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
Name:IRON OXIDE
CAS:1309-37-1
RTECS #:NO7400000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5MG/M3(FE)FUME,B2;94
Name:SALICYLIC ACID
CAS:69-72-7
RTECS #:VO0525000
Fraction by Wt: 1-5%
Other REC Limits:NONE RECOMMENDED
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: <2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9394
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:EYE: IRRITATING (REDNESS, SMARTING,
TEARING, SWELLING). SKIN: IRRITATION, DERMATITIS (DRYNESS,
CRACKING). INHALATION: RESP SYSTEM IRRITATION, TEMPORARY NERVOUS
SYSTEM IMPAIRMENT (LIGHT HEADEDNESS). LI VER & KIDNEY DAMAGE
(DIZZINESS, HEADACHE, NAUSEA, & FATIGUE), ASPHYXIATION. INGESTION:
DIGESTIVE SYSTEM IRRITATION.
======================= First Aid Measures =======================
First Aid:EYE: IN CASE OF EYE CONTACT, IMMEDIATELY FLUSH EYES WITH
LARGE AMOUNTS OF WATER FOR AT LEAST 10 MINUTES. CALL A PHYSICIAN.
SKIN: WASH AFFECTED AREA WITH SOAP AND WATER. INHALATION: REMOVE
PERSON TO UN CONTAMINATED AIR. CALL A PHYSICIAN. INGESTION: DO NOT
INDUCE VOMITING; IMMEDIATELY CALL A PHYSICIAN OR POISON CONTROL
CENTER.
===================== Fire Fighting Measures =====================
Flash Point:20.0F,-6.7C
Lower Limits:1.4
Upper Limits:11.5
Extinguishing Media:CO2, FOAM, DRY CHEMICALS, WATER
Fire Fighting Procedures:FIRE FIGHTERS SHOULD BE EQUIPPED WITH
SELF-CONTAINED BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING
THIS MATERIAL.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE. OVERHEATED, CLOSED
CONTAINERS ADJACENT TO FIRE COULD EXPLODE DUE TO INTERNAL PRESSURE
BUILDUP.
================== Accidental Release Measures ==================
Spill Release Procedures:EXTINGUISH IGNITION SOURCES. VENT AREA.
OBSERVE PRECAUTIONS FROM OTHER SECTIONS. CONTAIN THE SPILL. COVER
WITH ABSORBENT MATERIALS AS NEEDED. COLLECT THE SPILLED MATERIAL
USING NON-SPARKING TOOLS. PLA CE IN A US DEPT OF TRANS METAL
CONTAINER & SEAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
KEEP AWAY FROM HEAT, SPARKS, FLAME & OTHER IGNITION SOURCES. VAPORS
RELEASED BY PRODUCT CAN BE IGNITED EASILY.
Other Precautions:GROUND CNTNR WHEN TRANSFERRING CONTENTS. AVOID
PROLONGED BREATHING OF VAPOR. USE IN AREAS W/VENT TO MAINTAIN VAPOR
CONCENTRATIONS BELOW TLV. AVOID EYE & SKIN CONTACT. KEEP CNTNR
CLOSED WHEN NOT IN USE . KEEP OUT OF REACH OF CHILDREN.
============= Exposure Controls/Personal Protection =============
Ventilation:USE ONLY IN AREAS WITH SUFFICIENT VENTILATION TO MAINTAIN
VAPOR CONCENTRATIONS BELOW THE RECOMMENDED EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES WHEN HANDLING PRODUCT
Eye Protection:CHEMICAL GOGGLES OR SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F2
Boiling Pt:B.P. Text:175F,79CMEK
Vapor Pres:2.5
Vapor Density:80 @ 68F
Spec Gravity:1.04 (WATER=1)
Evaporation Rate & Reference:2.7 (BU AC=1)
Solubility in Water:SLIGHT
Appearance and Odor:REDDISH-BROWN, HEAVY SYRUP-KETONE ODOR
Percent Volatiles by Volume:48.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2, AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE ABSORBED AND BULK PRODUCT AFTER
MIXING WITH FLAMMABLE MATERIAL IN A LICENSED HAZARDOUS WASTE
FACILITY. DISPOSAL SHOULD BE IN ACCORDANCE WITH APPLICABLE
REGULATIONS. US HAZARDOUS WASTE NO. D 001 (IGNITABLE).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
PRIMARY BATTERY,MERCURY
| 1310-58-3
21908-53-2
7439-97-6 |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 25068-38-6
84-74-2
108-65-6
64742-94-6
107-98-2
13463-67-7 |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 112-57-2
111-40-0
112-24-3 |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 25068-38-6
84-74-2
108-65-6
64742-94-6
107-98-2
13463-67-7 |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 112-57-2
111-40-0
112-24-3 |
|
TECTYL 437
| |
|
BRAKE SHOE AND LINING ASSEMBLY
| 12001-29-5
1317-95-9
12001-26-2
1333-86-4
7782-42-5
1309-37-1
1314-13-2
7429-90-5
7440-50-8
7439-92-1
14807-96-6
1333-82-0
1305-78-8
9003-35-4
12168-85-3
12002-43-6
7727-43-7
10025-67-9
1317-65-3 |
|
KEROSENE PRODUCT CODE 055000-00700
| 8008-20-6 |
|
TOLUENE SPIRIT GLASS THERMOMETER
| 108-88-3
62-53-3 |
|
TECTYL 502C
| |
|
TECTYL 502 C
| |
|
MERCURY IN GLASS THERMOMETER
| 7439-97-6 |
|
PIGMENT - BURNT UMBER
| |
|
TECTYL 275
| |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 25068-38-6
84-74-2
108-65-6
64742-94-6
107-98-2
13463-67-7 |
|
OCEAN FLAYMBAR 477 FIRE RETARDANT EPOXY PAI
| 112-57-2
111-40-0
112-24-3 |
|
BROMINE, CAT NO SB84500
| 7726-95-6 |
|
SCOTCHCAL EC800 SEALANT
| 78-93-3
9003-18-3
8050-31-5
471-34-1
108-10-1
78-51-3
1327-39-5
13463-67-7
1309-37-1
69-72-7
1314-13-2 |
|
SODIUM CARBONATE,S-263
| 497-19-8 |
|
ORTHOBORIC ACID
| 10043-35-3 |
|
ADHESIVE X-822
| |
|
RED OXIDE OF MERCURY,BA-1312/U
| 21908-53-2 |
|
THIOURIA
| 62-56-6 |
|
PRIMARY BATTERY,MERCURY BA12930
| 1310-58-3
21908-53-2
7439-97-6 |
|
MIL-C-16555D TY I VINYL PC A9-021
| |
|
EAAF015S OLIVE DRAB 34088
| |
|
THERMOPLASTIC COMPOUND X-652
| |
|
TECTYL 437
| |
|
EXXON DIESEL 2; PRODUCT CODE 072700-00787
| 68476-34-6 |
|
WS-516 BASE COMPOUND
| 108-88-3 |
|
WS-516A ACCELERATOR
| 1309-60-0 |
|
ADHESIVE, RUBBER BASE, GENERAL PURPOSE
| |
|
INDUSTRIAL GRADE 98% SODIUM BICARBONATE
| 144-55-8 |
|
TT-P-47G FLAT OIL PAINT
| 64741-41-9
68855-54-9 |
|
TT-P-47G FLAT OIL PAINT
| 64741-41-9
68855-54-9 |
|
G661 POLYSILOXANE GREASE
| |
|
PRIMARY BATTERY,MERCURY MR9
| 1310-58-3
21908-53-2
7439-97-6 |
|
ENAMEL, ALKYD, LUSTERLESS, BLACK 37038
| 1333-86-4
14807-96-6
8052-41-3 |
|
F 48
| 1317-95-9
1333-86-4 |
|
505 CARTRIDGE, 2% METHANE
| 74-82-8 |
|
LATEX PAINT
| 25265-77-4 |
|
ALUMINUM CASTINGS-SERIES 300 (WITHOUT BERYL
| 7429-90-5
7440-47-3
7440-50-8
7439-89-6
7439-96-5
7439-95-4
7440-02-0
7440-21-3
7440-31-5
7440-32-6
7440-66-6 |
|
BATTERY MERCURY BA1086/U
| 1310-58-3
21908-53-2
7439-97-6 |
|
PRIMARY BATTERY,MERCURY BA1087/U
| 1310-58-3
21908-53-2
7439-97-6 |
|
TUNGSTEN WELDING ELECTRODES
| 7440-33-7 |
|
E 496,ASBESTOS
| 1332-21-4 |
|
TT-P-1757A, TY I, YELLOW, P759A-66
| 14807-96-6
142-82-5
8030-30-6
78-83-1
108-88-3
110-19-0
108-87-2
110-82-7
11103-86-9
7758-97-6
7758-97-6
7439-92-1 |
|
PRIMER COATING, ZINC CHROMATE, YELLOW
| 1330-20-7
7440-78-4
11103-86-9
108-88-3
6472-48-9
78-93-3 |
|
TT-E-489G YELLOW 13538 ENAMEL, ALKYD, GLOSS
| 64742-47-8
13463-67-7
1344-37-2 |
|
ENAMEL ALKYD GLOSS YELLOW 13538 ID 742310
| |
|
|