===================== Product Identification =====================
MSDS NAME:C-4400 GREEN
NIIN:00D001011
MSDS Number: BBDSB
=== Responsible Party ===
Company:KLINGER RICHARD INC
Address:2350 CAMPBELL RD
City:SIDNEY
State:OH
ZIP:45365-9501
Country:US
Info Phone Num:513-498-1181
Emergency Phone Num:513-498-1181
Preparer's Name:DEREK COOMBER
CAGE:9U500
=== Contractor Identification ===
Company:KLINGER RICHARD INC
Address:2350 CAMPBELL RD
Box:City:SIDNEY
State:OH
ZIP:45365-9501
Country:US
Phone:937-498-1181
CAGE:9U500
============= Composition/Information on Ingredients =============
Name:CHROMIUM (III) OXIDE
CAS:1308-38-9
RTECS #:GB6475000
Fraction by Wt: 1-2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.5 MG CR/M3
ACGIH TLV:0.5 MG CR/M3
Name:RUBBER (NBR)
Other REC Limits:NONE SPECIFIED
Name:ARAMID FIBERS
Other REC Limits:NONE SPECIFIED
Name:FIBERS AND FILLERS; TYPE UNSPECIFIED
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS A SOLID. MOST LIKELY
EXPOSURE TO A USER IS INHALATION OF A DUST GENERATED DURING
CUTTING,SAWING,OR OTHER WISE SHAPING THE SHEET FOT USE.
Explanation of Carcinogenicity:CONTAINS CHROME OXIDE, LISTED BY NTP AND
IARC AS "CHROMIUM AND CERTAIN CHROME COMPOUNDS. SEE SUPP DATA.
Effects of Overexposure:INHALED:(DUST) RESPIRATORY IRRITATION,
COUGHING.
Medical Cond Aggravated by Exposure:NONE GIVEN BY MANUMACTURER.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH W/WATER 15 MIN, HOLD LIDS OPEN. SKIN:WASH WITH
SOAP & WATER. REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE. INHALED:REMOVE TO FRESH AIR. RESTORE BREATHING IF
NECESSARY. INGESTED:D O NOT INDUCE VOMITING. GIVE 2 LARGE GLASSES
OF MILK OR WATER AND GET IMMEDIATE MEDICAL CARE. GIVE NOTHING BY
MOUTH IF UNCONSCIOUS. IF IRRITATION PERSISTS OR IS SEVERE,SEE A
DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:ONCE IGNITED AND EXTINGUISHED, THIS
MATERIAL MAY NEED EXTRA COOLING TO PREVENT SPONTANEOUS REIGNITION.
================== Accidental Release Measures ==================
Spill Release Procedures:PICK UP PIECES, AND VACUUM OR SWEEP UP DUST.
DO NOT CAUSE MORE DUST DURING CLEANUP.
Neutralizing Agent:NONE
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:NONE
============= Exposure Controls/Personal Protection =============
Respiratory Protection:RESPIRATOR WILL NOT NORMALLY BE NECESSARY. USE
NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR OR RESPIRATOR FOR DUST
IF EXPOSURE IS ABOVE THE TLV/PEL. SEE 29 CFR 1910.134 FOR
REGULATIONS PERTAINING TO R ESPIRATOR USE.
Ventilation:GENERAL ROOM VENTILATION IS NORMALLY ADEQUATE. USE LOCAL
EXHAUST IF NECESSARY TO CONTROL EXPOSURE TO DUST.
Protective Gloves:NONE
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:INDUSTRIAL-TYPE WORK CLOTHING.
Work Hygienic Practices:USE GOOD INDUSTRIAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING OR DRINKING.
Supplemental Safety and Health
MFR LISTS THE PIGMENT AS CHROME III OXIDE. DURING USE, ETC. SOME
CHROME VI MAY BE FORMED, THE CARCINOGENIC FORM OF CHROME. ON THE
PLUS SIDE, NO EXPOSURE SHOULD OCCUR DURING USE SINCE THE CHROME
OXIDE IS ENCAPSULATED BY THE RUBBER.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:SOLID
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SOLID GREEN SHEET, LITTLE ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, ALKALIS
Stability Condition to Avoid:NONE GIVEN BY MANUMACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. MANUFACTURER SUGGESTS THAT DISPOSAL MAY BE DONE BY
LANDFILL I/A/W THE EP TOXICITY OF THE CHROME PIGMENT.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
NORTRON EC, PROGRASS EC
| 26225-79-6
1330-20-7
108-94-1 |
|
FREON TP-35
| 76-13-1
67-63-0
124-38-9
75-52-5 |
|
ELECTRO WASH C80, C16, C24, C240-4
| 76-13-1
124-38-9
75-69-4 |
|
CERTANIUM 707-SP 5/32 AC-DC, PART#12705
| 13463-67-7
7789-75-5
7439-96-5
7440-47-3
7440-02-0 |
|
CYCLOHEXYLAMINE
| 108-91-8 |
|
STANDARD HARDNESS SOLUTION, 0.2 E/M
| 10043-52-4 |
|
O-3789;O-3790 (P-NAPHTHOLBENZEIN)
| |
|
P3 FX 338, 10 GAL
| 7783-18-8
7732-18-5 |
|
NATAFLEX
| 1344-28-1
409-21-2
98-01-1
15096-52-3 |
|
MOLECULAR BOND PRODUCTS
| 7440-22-4
7440-50-8 |
|
BZN TOOL BLANKS & INSERTS
| 12070-12-1
7440-48-4
7440-48-4 |
|
BZN TOOL BLANKS AND INSERTS
| 12070-12-1
7440-48-4 |
|
DIAMOND OR CUBIC BORON NITRIDE GRINDING WHE
| 7723-14-0
7440-50-8
1305-78-8
7440-02-0 |
|
COMPAX TOOL BLANKS
| 7782-40-3
12718-69-3
7440-48-4 |
|
COMPAX TOOL BLANKS
| 12070-12-1
7440-48-4 |
|
NICKEL PLATED ABRASIVE PRODUCTS
| 7440-02-0 |
|
BRAEVAN 2 AISI M-3 (TYPE 2)
| 7440-47-3
1309-37-1
7440-02-0
7440-48-4
7439-98-7
7439-96-5 |
|
ALL FIRTHITE TUNGSTEN CARBIDE GRADES
| 7440-33-7
7440-48-4
7440-25-7 |
|
ONALITE REINFORCED SNAGGING.
| 1344-28-1
409-21-2
98-01-1
15096-52-3 |
|
MOBIL AERO HFA
| |
|
POXYLUBE
| |
|
ISOPROPYL ALCOHOL;SHELL CODE:31105
| 67-63-0 |
|
MERCURY GLASS THERMOMETER
| 7439-97-6 |
|
K-61 BLACK
| 1333-86-4
9003-55-8
12001-29-5 |
|
EPOLITE RESIN T
| 1675-54-3 |
|
EPOLITE HARDENER T
| 25154-52-3
872-50-4 |
|
WS18485, KM AMMONIUM PERCHLORATE
| 7790-98-9 |
|
CAUSTIC,CAUSTIC SODA,LYE
| 1310-73-2 |
|
ROSSITE,CHILEAN NITRATE,NITRATE OF SODA
| 7631-99-4 |
|
KLINGER SIL C-4401 (GREEN)
| 1332-58-7
1328-53-6
9003-18-3
13983-17-0
26125-61-1 |
|
C-4400 GREEN
| 1308-38-9 |
|
ALATHON POLYETHYLENE RESINS
| 9002-88-4 |
|
SYNTHITE ER-41
| 1330-20-7 |
|
TITANIUM & TITANIUM BASE ALLOYS
| 7440-32-6
7429-90-5
7439-98-7
7440-31-5
7440-62-2 |
|
AO SUPERCLEAR LENS CLEANING FLUID-LIQUID
| 67-63-0
56-81-5
7732-18-5 |
|
NORTRON EC
| 26225-79-6
1330-20-7
108-94-1 |
|
PYRIDINE RESIDUE WHOLE
| |
|
FREON 113
| 76-13-1 |
|
257 0R 23322 THYMOL BLUE INDICATOR SOLUTION
| 67-63-0
7732-18-5
76-61-9 |
|
HEXCEL ALUMINUM CORE HONEYCOMB
| 7429-90-5 |
|
HEXCELITE TYPE 1, 2, 3
| 7429-90-5
14808-60-7
7782-42-5 |
|
HEXCELITE TYPE 4
| 14808-60-7
7782-42-5 |
|
HEXGARD I OR HEXGARD D
| 14808-60-7
7782-42-5 |
|
HEXGARD PANEL TYPE 1 & D
| 14808-60-7 |
|
HEXGARD 540 TYPE 1&2; BLUE SEAL; HEXPRESS
| 7429-90-5
1332-21-4
7429-90-5 |
|
HEXCEL HFT,NP,HRP HONEYCOMB
| |
|
HEXCEL HRH-10,HRH-310,HRH-78 HONEYCOMB
| |
|
HRH-49
| 14808-60-7 |
|
HRH-327
| 14808-60-7 |
|
HRH-327
| 1333-86-4
14808-60-7 |
|
|