Search   
MSDS  : AMOSOL NAPHTHA 395 HF
CAS  : 8052-41-3
1330-20-7
100-41-4
NAME  : petroleum naphtha (stoddard solvent)
xylene
ethyl benzene
===================== Product Identification =====================

MSDS NAME:AMOSOL NAPHTHA 395 HF
NIIN:00N012745
MSDS Number: BQPLN
=== Responsible Party ===
Company:AMOCO OIL COMPANY
Address:200 EAST RANDOLPH DRIVE
City:CHICAGO
State:IL
ZIP:60601
Country:US
Info Phone Num:312-856-3907
Emergency Phone Num:800-447-8735;800-424-9300(CHEMTREC)
CAGE:15958
=== Contractor Identification ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DR
Box:City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Phone:312-856-3907- EM HLTH: 800 447-8735
CAGE:15958

============= Composition/Information on Ingredients =============

Name:PETROLEUM NAPHTHA (STODDARD SOLVENT)
CAS:8052-41-3
RTECS #:WJ8925000
Other REC Limits:N/K
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Name:XYLENE
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 3%
Other REC Limits:N/K
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:ETHYL BENZENE
CAS:100-41-4
RTECS #:DA0700000
Fraction by Wt: 2%
Other REC Limits:N/K
OSHA PEL:100 PPM
ACGIH TLV:100 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

===================== Hazards Identification =====================

LD50 LC50 Mixture:LD50 RAT ORAL >5 G/KG,RABBIT (SEE SUPP)
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL OR FATAL IF SWALLOWED AND/OR
ASPIRATED INTO LUNGS.ASPIRATION CAN CAUSE CHEMICAL PNEUMONIA.CAN BE
HARMFUL IF HIGH CONCENTRATIONS INHALED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:NO EFFECT EXPECTED.SKIN:CAN CAUSE
IRRITATION ON PROLONGED OR REPEATED CONTACT.INGESTION:N/K
.INHALATION:HIGH CONCENTRATIONS CAN CAUSE DIZZINESS,HEADACHE AND
NAUSEA.
Medical Cond Aggravated by Exposure:N/K

======================= First Aid Measures =======================

Eyes:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES.SKIN:WASH EXPOSED AREA WITH SOAP AND WATER.REMOVE
CONTAMINATED CLOTHING,INCLUDING SHOES.INGESTION:DO NOT INDUCE
VOMITING.GET IMMEDIATE MEDICAL A TTENTION.INHALATION:REMOVE TO
UNCONTAMINATED AREA.GIVE ARTIFICIAL RESPIRATION IF NOT
BREATHING.GET MEDICAL ATTENTION.

===================== Fire Fighting Measures =====================

Flash Point Method:TCC
Flash Point:100F,37.78C
Lower Limits:1%
Upper Limits:7%
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (DRY CHEMICAL,
CARBON DIOXIDE,HALOGENATED AGENTS,FOAM,STEAM) OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID.HAZARDOUS
DECOMPOSITION PRODUCTS:INCOMPLETE BURNING CAN PRODUCE CARBON
MONOXIDE,CARBON DIOXIDE AND OTHER HARMFUL PRODUCTS.

================== Accidental Release Measures ==================

Spill Release Procedures:REMOVE OR SHUT OFF ALL SOURCES OF
IGNITION.REMOVE MECHANICALLY OR CONTAIN ON AN ABSORBENT MATERIAL.
Neutralizing Agent:N/K

====================== Handling and Storage ======================

Handling and Storage Precautions:KEEP CNTNR CLSD.USE W/ ADEQ VENT.STORE
IN COMBUSTIBLE LIQUIDS STOR AREA.STORE AWAY FROM HEAT,IGNIT
SOURCES,OPEN FLAME IAW APPLIC FED,STATE/LOCAL REGS.
Other Precautions:AVOID PROLONGED OR REPEATED SKIN CONTACT.WASH AND DRY
CONTAMINATED CLOTHING AND SHOES BEFORE REUSE.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:IF VENTILATION IN INADEQUATE,USE NIOSH/MSHA
CERTIFIED RESPIRATOR WHICH WILL PROVIDE PROTECTION AGAINST ORGANIC
VAPOR/MIST.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:TO AVOID PROLONGED/REPEATED CONTACT.
Eye Protection:NOT REQD,SAFETY GLASSES GOOD PRACTICE.
Other Protective Equipment:PROTECTIVE CLOTHING TO PREVENT PROLONGED OR
REPEATED SKIN CONTACT.
Work Hygienic Practices:N/K
Supplemental Safety and Health
BOILING POINT:300-395F,148.89-201.67C.LD50-LC50 MIXTURE:DERMAL >2
G/KG;LC50 RAT INHALATION >11.5 MG/LITER (6 HOURS).ROUTES OF
ENTRY:INHALATION/SKIN/INGESTION .

================== Physical/Chemical Properties ==================

HCC:F4
Boiling Pt:B.P. Text:SEE SUPP
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Spec Gravity:0.79,WATER=1
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE, <0.1%
Appearance and Odor:CLEAR LIQUID

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
N/K
Stability Condition to Avoid:KEEP AWAY FROM IGNITION SOURCES (HEAT,
SPARKS,AND OPEN FLAMES).
Hazardous Decomposition Products:INCOMPLETE BURNING CAN PRODUCE CARBON
MONOXIDE,CARBON DIOXIDE,AND OTHER HARMFUL PRODUCTS.

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .ENCLOSED-CONTROLLED
INCINERATION UNLESS DIRECTED OTHERWISE BY APPLICABLE
ORDINANCES.CONSIDERED HAZ WASTE BY RCRA.ETHYLENE
BENZENE,XYLENE:SARA TITLE III,SECTION 313 LISTED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
S/D TSP WHITE TT-P-115F T-1 L/F 12W-D114 8030-30-6
64742-89-8
AMOSOL NAPHTHA 395 HF 8052-41-3
1330-20-7
100-41-4
C-324 5329-14-6
7758-29-4
EPICARE ANTIMICROBIAL TOPICAL GEL 67-63-0
ABLEBOND 463-1 80-05-7
7440-22-4
111-40-0
101-90-6
HOUGHTO-SAFE 1120
ACID RED 87,CAT NO EX0046,CI 45380 17372-87-1
GLID-GUARD EPOXY CHEMICAL RES FINISH,5242 71-36-3
64742-95-6
108-88-3
110-19-0
107-98-2
25036-25-3
GLID-GUARD ALKYD TANK & STRUCTURAL ENAMEL,5 14807-96-6
13463-67-7
100-41-4
67700-92-9
64742-47-8
64742-88-7
EA 933 PART B 101-77-9
108-45-2
EA 933 PART A 1332-21-4
7631-86-9
X500 LT STBL TEFLON RED 8R36 108-88-3
78-93-3
763-69-9
111-15-9
1344-28-1
ACETONE,1640,AC-18 67-64-1
HI SOLIDS PITT GLAZE GLOSS, 16-610, COMPONE 14807-96-6
13463-67-7
64742-88-7
108-65-6
LATEX SEMI-GLOSS ENAMEL,MIDTONE BASE 6-515 13463-67-7
1332-58-7
7732-18-5
25265-77-4
ALL PURPOSE ETP CUTTING FLUID,93215 64742-63-8
LAUNDRI DESTAINER 7681-52-9
DIEMAKERS LUBRICATING GREASE, 60290 68411-15-4
64742-52-5
56-81-5
8006-32-4
40 36204 800 SYN/GARD ENAM DE 8032-32-4
1330-20-7
13463-67-7
8032-32-4
EMC-13 CLEANER, 2168 8032-32-4
75-09-2
71-55-6
NUCLEAR GRADE DURALLOY HARDENER 68911-35-3
68911-35-3
ICE-BAN 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5
METALLIZING PAINTS - SPEC BRUSH, 547 7439-98-7
7439-96-5
11140-68-4
108-88-3
108-10-1
METALLIZING PAINTS - BRUSH PAINT, 568 7439-98-7
7439-96-5
1344-28-1
14808-60-7
108-88-3
108-10-1
METALLIZING PAINTS - SCREEN PAINT, 568 7439-98-7
7439-96-5
1344-28-1
14808-60-7
8002-09-3
WHITE LITHIUM GREASE (AEROSOL) 3080 64742-18-3
71-55-6
74-98-6
75-28-5
HIGH SPEED ETCH 35 107-21-1
HEA 3/8 INCH 100-42-5
94-36-0
5032 BEE, WASP, HORNET 75-09-2
8003-34-7
114-26-1
67-63-0
1035 ODOR-SOLV SEWAGE CHEM 107-41-5
64742-96-7
67-63-0
BERYLLIUM COPPER CASTING ALLOYS, CU-4BE (MA 7440-41-7
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 275C (C828 7440-41-7
7440-48-4
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 245C (C826 7440-41-7
7440-48-4
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 165C (C824 7440-41-7
7440-48-4
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 72C (C9670 7440-41-7
7440-50-8
1309-37-1
7439-96-5
7440-02-0
BERYLLIUM COPPER CASTING ALLOYS, 70C (C8140 7440-50-8
7440-41-7
7440-47-3
BERYLLIUM COPPER CASTING ALLOYS, 21C (C8251 7440-41-7
7440-48-4
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 20C (C8250 7440-41-7
7440-48-4
7440-50-8
BERYLLIUM COPPER CASTING ALLOYS, 14C (C8220 7440-41-7
7440-50-8
7440-02-0
BERYLLIUM COPPER CASTING ALLOYS, 10C (C8200 7440-41-7
7440-48-4
7440-50-8
REDI-SEAL W/TROWEL, 0170 8030-30-6
8052-42-4
REGULAR STOPYT PASTE STP-57 1344-28-1
1314-36-9
67-63-0
117-81-7
107-98-2
VBP-300 VISIBLE PENETRANT 68131-40-8
LABTONE, S2250
ACRYLIC LATEX ENAMEL UNDERCOAT, 066 57-55-6
25265-77-4
G33GD031 LOW GLOSS ALPINE GREEN ENAMEL 64742-89-8
61789-51-3
1338-23-4
108-88-3
71-36-3
8032-32-4
1330-20-7
13463-67-7
8032-32-4
1333-86-4
SOLUTION 11 7647-01-0
7772-99-8
SOLUTION 6 7647-01-0
7732-18-5
SOLUTION 5 64-17-5
140-89-6
SOLUTION 1 7664-93-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com