| MSDS | : | UNAMIX 7 CARBON DIOXIDE-ARGON MIXTURE | | CAS | : | 124-38-9
7440-37-1 | | NAME | : | ing 12:ansi z-49-1 "safety in welding and cutting"
other prec:full cyls being stored for excessive periods of
ing 14: assoc pamphlets p-1, p-9, p-14, & safety bulletin
ing 15: remain in place unless cyl is secured w/valve
ing 16: suitable hand truck for cyl movement. use press
ing 17: (<3,000 psig) piping/sys.do not heat cyl by any
ing 18:valve/trap in discharge line to pvnt haz back flow
ing 19:assoc pamphlets p-1,p-9,p-14,& safety bulletin
ing 20:qualified prdcers of compressed gas.shipment of
ing 21:w/his (written) consent is violation of fed
ing 22:lbls thereon) containing brazing/welding filler
ing 23:under 29cfr 1910.252 "welding, cutting &
ing 24:work environ," appendix b,sec b2 "welding fumes"
carbon dioxide. bp: -109.3f(-78.5). vp: 856 psia @ 70f
argon. bp: -302.6f(-185.9c). vp: above critical temperature
supp data:shade which is too dark to see weld zone.then go
ing 3:provide prot screens & flash goggles, if nec, to
vent:use enough vent,loc exhst at arc/both,to keep welding
ing 5: general area. train the welder to keep his head out
other prot equip: inj from radia, sparks & elec shock. see
ing 7: shoulder prot, as well as dark substantial clthg.
ing 8: himself from work and ground.
hlth haz: fumes may rslt in discomfort such as: dizz,
ing 10:overexp may lead to siderosis (iron deposits in
ing 11: func.arc rays can inj eyes & burn skin.elec shock
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:UNAMIX 7 CARBON DIOXIDE-ARGON MIXTURE
NIIN:00N037000
MSDS Number: BQRMD
=== Responsible Party ===
Company:NATIONAL WELDERS
Address:810 GESCO
Box:31007
City:CHARLOTTE
State:NC
ZIP:28231
Country:US
Info Phone Num:704-333-5475
Emergency Phone Num:800-866-4422;800-424-9300(CHEMTREC)
CAGE:18264
=== Contractor Identification ===
Company:NATIONAL WELDERS SUPPLY CO INC
Address:810 GESCO ST
Box:31007
City:CHARLOTTE
State:NC
ZIP:28231
Country:US
Phone:704-333-5475
CAGE:18264
============= Composition/Information on Ingredients =============
Name:ING 12:ANSI Z-49-1 "SAFETY IN WELDING AND CUTTING"
PUBLISHED BY THE AMERICAN WELDING SOCIETY.
RTECS #:9999999ZZ
Name:OTHER PREC:FULL CYLS BEING STORED FOR EXCESSIVE PERIODS OF
TIME. FOR ADDNL STOR RECOM, CONSULT COMPRESSED GAS (ING 15)
RTECS #:9999999ZZ
Name:ING 14: ASSOC PAMPHLETS P-1, P-9, P-14, & SAFETY BULLETIN
SB-2.USE ONLY IN WELL-VENT AREAS.VALVE PROT CAPS MUST (ING 16)
RTECS #:9999999ZZ
Name:ING 15: REMAIN IN PLACE UNLESS CYL IS SECURED W/VALVE
OUTLET PIPED TO USE POINT.DO NOT DRAG/SLIDE/ROLL CYLS.USE (ING 17)
RTECS #:9999999ZZ
Name:ING 16: SUITABLE HAND TRUCK FOR CYL MOVEMENT. USE PRESS
REDUCING REGULATOR WHEN CONNECTING CYL TO LOWER PRESS (ING 18)
RTECS #:9999999ZZ
Name:ING 17: (<3,000 PSIG) PIPING/SYS.DO NOT HEAT CYL BY ANY
MEANS TO INCR DISCHARGE RATE OF PROD FROM CYL.USE CHECK (ING 19)
RTECS #:9999999ZZ
Name:ING 18:VALVE/TRAP IN DISCHARGE LINE TO PVNT HAZ BACK FLOW
INTO CYL.FOR ADDNL HNDLG RECOM,CONSULT COMPRESSED GAS (ING 20)
RTECS #:9999999ZZ
Name:ING 19:ASSOC PAMPHLETS P-1,P-9,P-14,& SAFETY BULLETIN
SB-2.COMPRESSED GAS CYLS SHOULD NOT BE REFILLED EXCEPT BY (ING 21)
RTECS #:9999999ZZ
Name:ING 20:QUALIFIED PRDCERS OF COMPRESSED GAS.SHIPMENT OF
COMPRESSED GAS CYL WHICH HAS NOT BEEN FILLED BY OWNER OR (ING 22)
RTECS #:9999999ZZ
Name:ING 21:W/HIS (WRITTEN) CONSENT IS VIOLATION OF FED
LAW(49CFR).CONSULT HAZ WARNINGS ON BOXES/CNTNRS (OR ON TAGS/ (ING
23)
RTECS #:9999999ZZ
Name:ING 22:LBLS THEREON) CONTAINING BRAZING/WELDING FILLER
METALS,FLUXES & FUSIBLE GRANULAR MATLS.SEE OSHA SFTY REGS(ING 24)
RTECS #:9999999ZZ
Name:ING 23:UNDER 29CFR 1910.252 "WELDING, CUTTING &
BRAZING".ALSO SEE ACGIH "TLVS (1991-1992) FOR CHEM SUBSTANCES
IN(ING 25)
RTECS #:9999999ZZ
Name:ING 24:WORK ENVIRON," APPENDIX B,SEC B2 "WELDING FUMES"
(TOTAL PARTICULATE TLV-TWA, 5 MG/M3) FOR FURTHER INFORMATION.
RTECS #:9999999ZZ
Name:CARBON DIOXIDE. BP: -109.3F(-78.5). VP: 856 PSIA @ 70F
(21.1C) (5900 KPA). SOLUBILITY: SOLUBLE.
CAS:124-38-9
RTECS #:FF6400000
OSHA PEL:5000 PPM
ACGIH TLV:5000PPM/30000STEL;93
Name:ARGON. BP: -302.6F(-185.9C). VP: ABOVE CRITICAL TEMPERATURE
OF -188.1F(-122.3C) @ 70F(21.1C). SOLUBILITY: NEGLIGIBLE.
CAS:7440-37-1
RTECS #:CF2300000
ACGIH TLV:SIMPLE ASPHYXIANT
Name:SUPP DATA:SHADE WHICH IS TOO DARK TO SEE WELD ZONE.THEN GO
TO NEXT LTR SHADE WHICH GIVES SUFF VIEW OF WELD ZONE. (ING 4)
RTECS #:9999999ZZ
Name:ING 3:PROVIDE PROT SCREENS & FLASH GOGGLES, IF NEC, TO
SHIELD OTHERS FROM ARC RAYS RADIA WHICH CAN INJ EYES & BURN SKIN.
RTECS #:9999999ZZ
Name:VENT:USE ENOUGH VENT,LOC EXHST AT ARC/BOTH,TO KEEP WELDING
FUMES & GASES < APPLIC TLV'S IN WORKER'S BRTHG ZONE & (ING 6)
RTECS #:9999999ZZ
Name:ING 5: GENERAL AREA. TRAIN THE WELDER TO KEEP HIS HEAD OUT
OF THE FUMES.
RTECS #:9999999ZZ
Name:OTHER PROT EQUIP: INJ FROM RADIA, SPARKS & ELEC SHOCK. SEE
ANSI Z-49-1.AT MIN, THIS INCL ARM PROT, APRONS, HATS, (ING 8)
RTECS #:9999999ZZ
Name:ING 7: SHOULDER PROT, AS WELL AS DARK SUBSTANTIAL CLTHG.
TRAIN WELDER NOT TO TOUCH LIVE ELEC PARTS & TO INSULATE (ING 9)
RTECS #:9999999ZZ
Name:ING 8: HIMSELF FROM WORK AND GROUND.
RTECS #:9999999ZZ
Name:HLTH HAZ: FUMES MAY RSLT IN DISCOMFORT SUCH AS: DIZZ,
NAUS/DRY/IRRIT OF NOSE/THROAT/EYES. LONG-TERM (CHRONIC) (ING 11)
RTECS #:9999999ZZ
Name:ING 10:OVEREXP MAY LEAD TO SIDEROSIS (IRON DEPOSITS IN
LUNGS)& IS BELIEVED BY SOME INVESTIGATORS TO AFFECT PULM (ING 12)
RTECS #:9999999ZZ
Name:ING 11: FUNC.ARC RAYS CAN INJ EYES & BURN SKIN.ELEC SHOCK
CAN KILL.AVOID BRTHG FUMES & GASES.USE ADEQ VENT. SEE (ING 13)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CARBON DIOXIDE IS MOST POWERFUL
CEREBRAL VASODILATOR KNOWN. INHAL LRG CONCS CAUSES RAPID
CIRCULATORY INSUFF LEADING TO COMA & DEATH. CHRONIC HARMFUL EFTS
ARE NOT KNOWN FROM RPTD INHAL OF LOW (20-30%) CONCS OF
MIX.CAUTION: WELDING/BRAZING MAY PRDCE FUMES & GASES HAZ TO HLTH.
SHORT-TERM (ACUTE OVEREXP TO WELDING (ING 10)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:CONCENTRATIONS OF 20-30 PERCENT OF THIS MIXTURE
WHEN INHALED WITH ADEQUATE OXYGEN IN THE AIR WILL CAUSE AN INCREASE
IN THE RESPIRATORY RATE. HIGHER CONCENTRATIONS WILL CAUSE HEADACHE,
NAUSEA AND EVENT UAL UNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:PERSONS IN ILL HEALTH WHERE SUCH
ILLNESS WOULD BE AGGRAVATED BY EXPOSURE TO THIS MIXTURE SHOULD NOT
BE ALLOWED TO WORK WITH OR HANDLE THIS PRODUCT.
======================= First Aid Measures =======================
First Aid:PROMPT MED ATTN IS MANDATORY IN ALL CASES OF OVEREXP TO
MIX.RESCUE PERS SHOULD BE EQUIPPED W/NIOSH/MSHA APPRVD SCBA.INHAL:
CONSCIOUS PERSONS SHOULD BE ASSISTED TO AN UNCONTAMD AREA & INHALE
FRESH AIR. QUICK REMOVAL FROM CONTAMD AREA IS MOSTIMPORTANT.UNCON
PERSONS SHOULD BE MOVED TO AN UNCONTAMD AREA, GIVEN ASSISTED RESP &
SUPP OXYGEN.FURTHER TREATMENT SHOULD BE SYMP & SUPPORTIVE.INGEST:
(SUPDAT)
===================== Fire Fighting Measures =====================
Extinguishing Media:NONFLAMMABLE GAS MIXTURE. USE MEDIA SUITABLE FOR
SURROUNDING FIRE CONDITIONS .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . IF CYLINDERS ARE INVOLVED IN FIRE, SAFELY
RELOCATE OR KEEP COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE ALL PERSONNEL FROM AFFECTED AREA. USE
APPROPRIATE PROTECTIVE EQUIPMENT. IF LEAK IS IN CONTAINER OR
CONTAINER VALVE, CONTACT YOUR CLOSEST SUPPLIER LOCATION OR CALL
EMERGENCY TELEPHONE NUMBER L ISTED HEREIN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:PROTECT CYLINDERS FROM PHYSICAL
DAMAGE. STORE IN COOL, DRY, WELL-VENTILATED AREA AWAY FROM HEAVILY
TRAFFICKED AREAS AND EMERGENCY EXISTS.
Other Precautions:DO NOT ALLOW TEMP WHERE CYLS ARE STORED TO EXCEED
125F (52C). CYLS SHOULD BE STORED UPRIGHT & FIRMLY SECURED TO PVNT
FALLING/BEING KNOCKED OVER.FULL & EMPTY CYLS SHOULD BE SEGREGATED.
USE "FIRST IN-FI RST OUT" INVENTORY SYS TO PVNT (ING 14)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED POS PRESS AIR LINE MASK/SCBA
SHOULD BE AVAIL FOR EMER USE. WHEN WELDING IN CONFINED SPACE/WHERE
LOCAL EXHST/VENT DOES NOT KEEP EXPOS BELOW WELDING FUME TLV, USE
NIOSH/MSHA APPROVED POS PRESS AIR LINE WITH MASK OR SCBA.
Ventilation:TO PVNT ACCUMULATION OF HIGH CONCS OF GAS SO AS TO REDUCE
OXYGEN LEV IN AIR TO <18 MOLAR PERCENT. WHEN WELDING, (ING 5)
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEM WORK GOG/FULL LGTH FACESHLD(SUPDAT)
Other Protective Equipment:SAFETY SHOES & APPROP HEAD & EYE PROT WHEN
WELDING.WHEN WELDING, WEAR HEAD, HAND & BODY PROT WHICH HELP TO
PVNT (ING 7)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAV:1.44 @ 70F (21.1C) (AIR=1). FIRST AID PROC:CALL MD
IMMED.SKIN:FLUSH W/COPIOUS AMTS OF WATER .EYE:FLUSH W/WATER FOR AT
LST 15 MINS.WASH DISP METH:LISTED HEREIN.DISP I/A/W FE D,ST,& LOC
REGS.EYE PROT:.WHEN WELDING,WEAR HELMET/USE FACESHLD W/FILTER
LENS.AS GEN RULE,START W/ (ING 3)
================== Physical/Chemical Properties ==================
HCC:G3
Boiling Pt:B.P. Text:SEE INGS
Vapor Pres:SEE INGS
Spec Gravity:SUPP DATA
Solubility in Water:SEE INGREDIENTS
Appearance and Odor:COLORLESS, ODORLESS GAS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:NONE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DO NOT ATTEMPT TO DISP OF WASTE/UNUSED
QTYS.RETURN IN SHIPPING CNTNR PROPERLY LBLD, W/ANY VALVE OUTLET
PLUGS/CAPS SECURED & VALVE PROT CAP IN PLACE TO YOUR SUPP.FOR EMER
DISP ASSIST, CONT YOUR CLOSEST SUPP LOCATION/CALL EMER TELEPHONE
NUMBER (SUPDAT)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
FERROTITANIUM (HIGH TI GRADE), PC8750
| 7429-90-5
7440-44-0
7439-89-6
7440-21-3
7440-32-6 |
|
FERROTITANIUM (HIGH TI GRADE), PC8760
| 7429-90-5
7440-44-0
7439-89-6
7440-21-3
7440-32-6 |
|
NICKEL ALLOY, NICKEL 2XX
| 7440-02-0
1309-37-1
7440-50-8
7440-47-3
7439-98-7
7440-33-7
7440-48-4
13463-67-7
7439-96-5
7440-21-3 |
|
NICKEL ALLOY, MONEL-INCONEL PLATE
| 7440-02-0
1309-37-1
7440-50-8
7440-47-3
7439-98-7
7440-33-7
7440-48-4
13463-67-7
7439-96-5
7440-21-3 |
|
NICKEL ALLOY, MONEL-INCONEL SHEET
| 7440-33-7
7440-48-4
13463-67-7
7439-96-5
7440-21-3
7440-02-0
1309-37-1
7440-50-8
7440-47-3
7439-98-7 |
|
NICKEL ALLOY, MONEL-INCONEL ROD
| 7440-02-0
1309-37-1
7440-50-8
7440-47-3
7439-98-7
7440-03-1
7440-33-7
7440-48-4
7440-32-6
7439-96-5
7440-21-3 |
|
NICKEL ALLOY, INCOLOY ALLOY 8XX
| 7440-02-0
1309-37-1
7440-50-8
7440-47-3
7439-98-7
7440-03-1
7440-33-7
7440-48-4
7440-32-6
7439-96-5
7440-21-3 |
|
TURCO METEOR
| 25155-30-0
26027-38-3
1336-21-6
111-76-2
7632-00-0 |
|
SERGENE
| 64-17-5
100-51-6 |
|
3-DIMETHYLAMINOPROPIONITRILE
| 1738-25-6 |
|
HYSOL EA4317 PART A
| 25068-38-6 |
|
MICRO FILM READER PRINTER TONER
| 1333-86-4
103885-38-7
9003-07-4
84179-66-8
109125-50-0
109125-51-1 |
|
FRANCO A BRICK
| 1332-72-7
1344-28-1
1318-16-7
1302-93-8
22708-90-3 |
|
ZINC REAGENT P1, 500
| 7681-49-4 |
|
1075 PLASTISOL, PURPLE 17100
| 117-81-7
26027-38-3
13701-59-2 |
|
1075 PLASTISOL, WHITE 17886
| 13701-59-2
117-81-7
13701-59-2 |
|
1075 PLASTISOL, 1075 BLACK
| 117-81-7
13701-59-2
13701-59-2 |
|
BUFFER SOLUTION REFERENCE STANDARD PH 10.00
| 10043-35-3
7447-40-7
1310-73-2
7732-18-5 |
|
BUFFER SOLUTION REFERENCE STANDARD PH COLOR
| 10043-35-3
7447-40-7
1310-73-2
7732-18-5 |
|
NIKLAD FERROPREP 100, 47100
| 1310-73-2
6834-92-0 |
|
ISOBRITE 627W, 36060
| |
|
IN 625
| 7440-02-0
7440-47-3
7439-98-7
1309-37-1
7440-03-1
1314-34-7 |
|
HOW 21 (F 75)
| 7440-48-4
7440-47-3
7440-02-0
7439-98-7
7439-89-6 |
|
214 REGULAR LIQUID MOLD RELEASE
| 67-63-0
1330-20-7
8052-41-3
111-84-2
91-20-3
25551-13-7 |
|
AMTICO AD-29 EPOXY CEMENT - PART A
| 25068-38-6
67-63-0
2807-30-9 |
|
AMTICO AD-29 EPOXY CEMENT - PART B
| 68410-23-1
67-63-0 |
|
LATEX REDWOOD STAIN, 33
| 61790-53-2
1309-37-1
25852-37-3
7732-18-5 |
|
SUPERKOOL 7857
| |
|
BRANSON JEWELRY CLEANER
| 6834-92-0
9016-45-9
68439-57-6
111-76-2
7732-18-5 |
|
PYRIDINE
| 110-86-1 |
|
METEX ACID SALT 3005, 13005
| 7681-38-1 |
|
UNAMIX 7 CARBON DIOXIDE-ARGON MIXTURE
| 124-38-9
7440-37-1 |
|
TRI-COOL
| 102-71-6 |
|
COVERAL 11
| 15096-52-3
16893-85-9 |
|
1075 PLASTISOL, ORANGE 12246
| 117-81-7
9016-45-9
13701-59-2
775-89-7 |
|
DEVFLEX MARINE RED PRIMER, MD4979
| 1302-93-8
7779-90-0
12001-26-2
1309-37-1
7732-18-5 |
|
FOAMSEAL SEALANT, 30-45
| |
|
DEXIL 11
| 1332-58-7
9004-53-9 |
|
ATLAC 797 CT
| 100-42-5
7631-86-9 |
|
BOSCODUR 25C, 045001
| 141-78-6 |
|
SP-350 (AEROSOL), 3262
| 64742-47-8
71-55-6
124-38-9 |
|
30/30 RUST PREVENTIVE
| 71-55-6
75-09-2
68476-86-8 |
|
PANASONIC DRY TONER FQ-T76Q
| 25767-47-9
9003-55-8
5281-04-9
11098-84-3
7631-86-9 |
|
PANASONIC DRY TONER FQ-T75Q
| 25767-47-9
9003-55-8
147-14-8
11098-84-3
7631-86-9 |
|
PANASONIC DRY TONER FQ-T70Q
| 25767-47-9
9003-55-8
1309-38-2
1333-86-4
8005-02-5
112945-52-5 |
|
PANASONIC DRY TONER FQ-T77Q
| 25767-47-9
9003-55-8
5102-83-0
11098-84-3
112945-52-5 |
|
NEO CV25
| 117-81-7 |
|
DRIWEL
| 7732-18-5
107-21-1
67-56-1 |
|
HI-RENFIX I
| 7783-18-8
7772-98-7
7757-83-7
10043-35-3
64-19-7
10043-01-3
7732-18-5 |
|
ACETIC ACID
| 64-19-7
7732-18-5 |
|
|