Search   
MSDS  : EPOXY SYN EN PT A, 26521 LIGHT TAN
CAS  : 13463-67-7
108-88-3
71-36-3
107-98-2
NAME  : titanium oxide; (titanium dioxide)
toluene (sara iii). vp:54.00. lel:1
butyl alcohol; (n-butanol) vp:4.39. lel:1.5
2-propanol, 1-methoxy-; (propylene glycol monomethyl
efts of overexp:toluene 108-88-3 appears on navy listing of
ing 5:hlth professionals concerning latest hazard list
===================== Product Identification =====================

MSDS NAME:EPOXY SYN EN PT A, 26521 LIGHT TAN
NIIN:01-033-7794
MSDS Number: BQSKF
=== Responsible Party ===
Company:MORTON COATINGS INC
Address:40 HAYNES CIRCLE
City:CHICOPEE
State:MA
ZIP:01020
Country:US
Info Phone Num:413-592-4191
Emergency Phone Num:413-592-4191;800-424-9300(CHEMTREC)
Preparer's Name:L. DUSSAULT
CAGE:MRTNC
=== Contractor Identification ===
Company:MORTON COATINGS INC
Address:CHICOPEE FACILITY 40 HAYNES CIRCLE
Box:City:CHICOPEE
State:MA
ZIP:01020
Country:US
Phone:413-592-4191;800-424-9300(CHEMTREC)
CAGE:MRTNC

============= Composition/Information on Ingredients =============

Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 41.07%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293

Name:TOLUENE (SARA III). VP:54.00. LEL:1
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 14.76%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:BUTYL ALCOHOL; (N-BUTANOL) VP:4.39. LEL:1.5
CAS:71-36-3
RTECS #:EO1400000
Fraction by Wt: 8.57%
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Name:2-PROPANOL, 1-METHOXY-; (PROPYLENE GLYCOL MONOMETHYL
ETHER). VP:10.9. LEL:6
CAS:107-98-2
RTECS #:UB7700000
Fraction by Wt: 4.93%
OSHA PEL:100 PPM;150 STEL
ACGIH TLV:100 PPM;150 STEL

Name:EFTS OF OVEREXP:TOLUENE 108-88-3 APPEARS ON NAVY LISTING OF
OCCUP REPROD HAZS. SEEK CONSULTATION FROM APPROP (ING 6)
RTECS #:9999999ZZ

Name:ING 5:HLTH PROFESSIONALS CONCERNING LATEST HAZARD LIST
INFORMATION AND SAFE HANDLING AND EXPOSURE RECOMMENDATION .
RTECS #:9999999ZZ

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO EYES, SKIN, NOSE AND
THROAT. HEADACHE, DIZZINESS, AND NAUSEA CAN RESULT FROM INHALATION.
REPEATED & PROLONGED SKIN CONTACT MAY RESULT IN DRYNESS POSSIBLY
LEADING TO DERM. TOXIC IF INGEST ED. TOLUENE MAY AFFECT LIVER,
KIDNEYS/BLOOD. CHRONIC:REPORTS HAVE ASSOCIATED REPEATED AND
PROLONGED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OCCUPATIONAL OVEREXPOSURE TO SOLVENT
WITH PERM BRAIN AND NERVOUS SYS DAMAGE. INTENTIONAL MISUSE BY
DELIBERATELY CONCENTRATING AND INHALING CONTENTS OF PRODUCT MAY BE
HARMFUL/FATAL. TOLUENE MA Y HARM DEVELOPING FETUS IF PREGNANT WOMAN
IS EXPOSED. (ING 5)
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN DISORDERS,
CHRONIC RESPIRATORY DISEASE.

======================= First Aid Measures =======================

First Aid:INHAL:REMOVE TO FRESH AIR. RESTORE BREATHING. CONSULT
PHYSICIAN. EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. CONSULT
PHYSICIAN. SKIN:WASH WITH SOAP AND WATER. REMOVE CONTAMINATED
CLOTHING. CONSULT P HYSICIAN IF IRRITATION PERSISTS. INGEST:DRINK 1
OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CONSULT
PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.

===================== Fire Fighting Measures =====================

Flash Point Method:TCC
Flash Point:40.0F,4.4C
Lower Limits:1.0
Extinguishing Media:ALCOHOL FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. ISOLATE FROM HEAT, SPARKS, ELEC EQUIP & OPEN FLAME. WATER IS NOT
USUALLY EFFECTIVE IN FIGHTING LIQ FIRES.
Unusual Fire/Explosion Hazard:WATER SPRAY MAY BE USED TO COOL CLOSED
CONTAINERS TO HELP PREVENT EXPLOSION WHEN EXPOSED TO EXTREME HEAT.

================== Accidental Release Measures ==================

Spill Release Procedures:REMOVE ALL SPARK SOURCES, FLAMES AND HOT
SURFACES. MAINTAIN ADEQUATE VENTILATION. AVOID BREATHING VAPORS.
ADD ABSORBENT TO SPILL AREA. RECOVER FREE LIQUID. KEEP CHEMICAL
PRODUCTS OUT OF STREAMS AND WA TERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:AVOID STORAGE IN HIGH TEMPERATURE
AREAS OR NEAR FIRE OR OPEN FLAME. KEEP CONTAINER CLOSED. USE ONLY
WITH ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED OR REPEATED
CONTACT WITH SKIN. DO NOT INGEST. FOR INDUSTRIAL USE ONLY.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:UNLESS AIR MONITORING DEMONSTRATES
VAPOR/DUST/MIST LEVELS BELOW THE CURRENT PEL OR TLV VALUES ALWAYS
WEAR AN APPROP PROPERLY FITTED (NIOSH/MSHA APPROVED) RESPIRATOR
DURING USE.
Ventilation:SHOULD BE EXPLOS PROOF & KEEP AIR CONTAM CONC BELOW CURRENT
OSHA PERMISSIBLE EXPOS LIMIT (PEL)/ACGIH'S (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOG W/FULL LNGTH FSHLD .
Other Protective Equipment:REMOVE AND WASH CONTAMINATED CLOTHING BEFORE
RE-USE.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
TOILET FACILITIES.
Supplemental Safety and Health
VENT:THRESHHOLD LIMIT VALUE (TLV).

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:>231F,111C
Vapor Pres:54.00
Vapor Density:HVR/AIR
Spec Gravity:1.46
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:50.16

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE REASONABLY FORESEEABLE.
Hazardous Decomposition Products:MOSTLY CO*2 WITH SOME CO.

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
EPOXY SYN EN PT A, 26521 LIGHT TAN 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 26521 LIGHT TAN 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
"1 SHOT" (R) LETTERING ENAMEL 104-L 64742-95-6
8032-32-4
95-63-6
8030-30-6
68037-38-7
7439-92-1
12688-94-7
GREEN EPOXY PRIMER 463-6-27 108-88-3
13463-67-7
14807-96-6
1330-20-7
108-94-1
13765-19-0
1344-37-2
78-93-3
108-10-1
108-65-6
CATALYST FOR 463-6-27 67-63-0
1330-20-7
MERCURIC NITRATE 10045-94-0
7732-18-5
"1 SHOT" (R) LETTERING ENAMEL 100-L 64742-95-6
8032-32-4
95-63-6
8030-30-6
68037-38-7
7429-90-5
7439-92-1
DTIC-DOME 4342-03-4
COLD VULCANIZING CEMENT 71-55-6
79-01-6
71-55-6
EPOXY SYN EN PT A, 36521 LIGHT TAN 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 36521 LIGHT TAN 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
CARBON DIOXIDE (CARBONIC ACID GAS) 124-38-9
ALUMINUM OXIDE, ALUMINA 1344-28-1
NICKEL CADMIUM BATTERY 12054-48-7
21041-95-2
21041-93-0
SEALING COMPOUND (LIQUID PROTECTANT & BEAUT
BATTERY COOLANT UNIT
SLYDE AEROSOL 64742-47-8
74-98-6
75-28-5
NITROGEN PRESSURIZED CYLINDERS 7727-37-9
ADALAT CAPSULES 21829-25-4
25322-68-3
7732-18-5
56-81-5
8006-90-4
81-07-2
BATTERY,STORAGE 7440-43-9
21041-95-2
7440-02-0
12054-48-7
1310-58-3
KRYTON-85 GAS MIXTURE 58933-55-4
ADALAT CAPSULES 21829-25-4
25322-68-3
7732-18-5
56-81-5
8006-90-4
81-07-2
DURABLE BLACK 1332-21-4
EPOXY SYN EN PT A, 17875 GLOSS WHITE 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 17875 GLOSS WHITE 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
EPOXY SYN EN PT A, 20450 MEDIUM TAN 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 20450 MEDIUM TAN 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
EPOXY SYN EN PT A, 26521 LIGHT TAN 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 26521 LIGHT TAN 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
CONSOLMO MOTOR OIL 10W-30 26566-95-0
HALON 1301 75-63-8
RANGE GUARD WET CHEM FIRE EXTINGUISH SYSTEM 584-08-7
7732-18-5
PRIMER, EPOXY CTG, CORRINHIB, LEAD & CHR FR 108-88-3
25068-38-6
13463-67-7
14807-96-6
14808-60-7
107-98-2
78-93-3
71-36-3
PRIMER, EPOXY CTG, CORRINHIB, LEAD & CHR FR 31326-29-1
71-36-3
107-98-2
108-88-3
111-40-0
1589-47-5
111-40-0
80-05-7
71-36-3
25068-38-6
RDS-1477 BROWN 10059 SILICONE ALKYD 8052-41-3
1317-65-3
7440-48-4
7439-96-5
BTTE1593DB DEEP TONE BASE COLOR 13695 64741-41-9
12001-26-2
EA 9309.3NA, PART A 112945-52-5
EA 9309.3 NA, PART B 111-40-0
4246-51-9
PANASONIC DEVELOPER FQ-Z105 1333-86-4
1309-38-2
1309-37-1
25767-47-9
112945-52-5
GAMMAZYME 700 FN 57-13-6
497-19-8
PANASONIC DRY TONER FQ-T16D 1333-86-4
1309-38-2
25767-47-9
72869-85-3
112945-52-5
EPOXY SYN EN PT A, 20313 LIGHT BROWN 13463-67-7
108-88-3
71-36-3
107-98-2
EPOXY HARDENER PT B, 20313 LIGHT BROWN 1330-20-7
107-98-2
1589-47-5
108-10-1
111-40-0
RVG ACTIVATED CARBON 7440-44-0
406584-100 NICKEL-CADMIUM SEALED CELL BATTE 7440-43-9
7440-02-0
KOVA STAIN KIT 26628-22-8
GASKET FUEL PUMP 12001-29-5
PAINT,FACE,CAMOUFLAGE,STICK FORM 14807-96-6
N-5396 YELLOW SILICONE ENAMEL 8052-41-3
7440-48-4
7439-96-5
RDS-1478 BROWN SILICONE ALKYD NO. 20059 8052-41-3
7440-48-4
7439-96-5

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net