| MSDS | : | CGL 1310 RESIN EPOXY LAMINATING RESIN | | CAS | : | 1317-65-3
2425-79-8
21645-51-2
25068-38-6
28768-32-3 | | NAME | : | calcium carbonate, domolite, limestone, whiting
1,4-butane diglycidyl ether, diepoxide
hydrated alumina, aluminum hydroxide, aluminum oxide
bisphenol a diglycidyl ether resin, epoxy resin,
4,4'-methylenebis(n,n-diglycidylaniline) *93-1*
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:CGL 1310 RESIN EPOXY LAMINATING RESIN
NIIN:00F027477
MSDS Number: BQZPH
=== Responsible Party ===
Company:CIBA-GEIGY CORP REN PLASTICS DIV
Address:4917 DAWN AVE
City:EAST LANSING
State:MI
ZIP:48823-5605
Country:US
Info Phone Num:517-351-5900
Emergency Phone Num:800-888-8372
Preparer's Name:PETER HENIGE
CAGE:02684
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORPORATION
Address:4917 DAWN AVE
Box:City:EAST LANSING
State:MI
ZIP:48823-5691
Country:US
Phone:517-351-5900
CAGE:02684
============= Composition/Information on Ingredients =============
Name:CALCIUM CARBONATE, DOMOLITE, LIMESTONE, WHITING
CAS:1317-65-3
RTECS #:EV9580000
OSHA PEL:15 MG/CUM (DUST)
ACGIH TLV:10 MG/CUM (DUST)
Name:1,4-BUTANE DIGLYCIDYL ETHER, DIEPOXIDE
CAS:2425-79-8
RTECS #:EJ5100000
Name:HYDRATED ALUMINA, ALUMINUM HYDROXIDE, ALUMINUM OXIDE
HYDRATEALUMINA TRIHYDRATE, ALUMINUM TRIHYDROXIDE
CAS:21645-51-2
RTECS #:BD0940000
OSHA PEL:15 MG/CUM (DUST)
ACGIH TLV:2 MG/CUM (DUST)
Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN,
ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000
Name:4,4'-METHYLENEBIS(N,N-DIGLYCIDYLANILINE) *93-1*
CAS:28768-32-3
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT): 1000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: SEVERE IRRITATION &
SENSITIZATION. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: SEVERE IRRITATION, BURNS, & ALLERGIC
REACTIONS. EYES: IRRITATION.
Medical Cond Aggravated by Exposure:SENSITIVITY, SKIN & EYE CONDITIONS
======================= First Aid Measures =======================
Eyes: FLUSH IMMEDIATELY W/WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER
TO DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR.
GIVE OX YGEN &/OR ARTIFICIAL RESPIRATION, IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES. REFERRAL TO A PHYSICIAN IS RECOMMENDED IF
THERE IS ANY QUESTION ABOUT THE SERIOUSNESS OF ANY INJURY.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:242F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:DECOMPOSITION & COMBUSTION PRODUCTS MAY
BE TOXIC.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL. AVOID CONTACT.
====================== Handling and Storage ======================
Handling and Storage Precautions:NUISANCE DUST MAY BE GENERATED WHEN
SANDING OR SAWING CURED MATERIAL.
Other Precautions:AVOID CONTACT W/EYES, SKIN, OR CLOTHING. AVOID
PROLONGED OR REPEATED CONTACT W/SKIN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH-APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR-MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST: REQUIRED
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
KEY1:C4. SEE NSN 8030-00-F01-5580 FOR PART 2 OF KIT, P/N RP 1510,
HARDENER.
================== Physical/Chemical Properties ==================
HCC:C2
Spec Gravity:1.25-1.30
Solubility in Water:SLIGHT
Appearance and Odor:BLACK LIQUID.
Percent Volatiles by Volume:NEGLI
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, & BASES
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:TOXIC MATERIALS, SUCH AS CO2, CO
==================== Disposal Considerations ====================
Waste Disposal Methods:CONSULT QUALIFIED LOCAL OR CORPORATE PERSONNEL
FOR METHOD THAT WILL COMPLY W/LOCAL, STATE, & FEDERAL HEALTH &
ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|