===================== Product Identification =====================
MSDS NAME:19-360 LUSTRE-GLO S-G WHITE BASE
NIIN:00F027506
MSDS Number: BQZQR
=== Responsible Party ===
Company:GILMAN CO
Address:801 RIVERFRONT PKY
Box:1257
City:CHATTANOOGA
State:TN
ZIP:37401
Country:US
Info Phone Num:615-756-5185
Emergency Phone Num:615-756-5185
CAGE:11348
=== Contractor Identification ===
Company:GILMAN CO
Box:City:CHATTANOOGA
State:TN
ZIP:37401
Country:US
Phone:615-756-5185
CAGE:11348
============= Composition/Information on Ingredients =============
Name:MINERAL SPIRITS
Fraction by Wt: 38.78%
Name:SILICA, AMORPHOUS FUMED (SUSPECTED HUMAN CARCINOGEN BY
IARC)
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 2.72%
OSHA PEL:0.1 MG/CUM
ACGIH TLV:0.1 MG/CUM
Name:TALC (POWDER), (ASBESTOS FREE), TALCUM; HYDROUS MAGNESIUM
SILICATE
CAS:14807-96-6
RTECS #:WW2710000
Fraction by Wt: 1.01%
OSHA PEL:20 MPPCF
ACGIH TLV:2 MG/CUM (RESP DUST)
Name:WEIGHT PER GALLON IN POUNDS: 9.91
RTECS #:9999999WG
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: HEADACHES, NAUSEA, LUNG
IRRITATION, NARCOSIS. EYES: IRRITATION. SKIN: ABSORPTION.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: PERMANENT BRAIN & NERVOUS SYSTEM
DAMAGE. WHEN DRY & REDUCED TO DUST CAN CAUSE LUNG DAMAGE
(SILICOSIS).
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 5-10 MINS. SKIN: WIPE MATERIAL OFF &
WASH AREA. INGESTION: DON'T INDUCE VOMITING. INHALATION: REMOVE TO
FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:95F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL OR SAND
Fire Fighting Procedures:AVOID USE OF WATER.
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE DUE TO VERY HIGH
TEMPERATURE INDUCED PRESSURE.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP SPILL OR LEAK
AT ONCE BY CREATING DIKE, ETC. COVER W/INERT ABSORBANT MATERIAL.
SHOVEL OR SWEEP INTO DISPOSABLE CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM SPARKS, HEAT, & OPEN
FLAMES. DON'T TAKE INTERNALLY. AVOID INHALATION OF PRODUCT.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR WHEN
VAPOR/MIST LEVELS EXCEED APPLICABLE LIMITS. USE DUST RESPIRATOR
WHEN SANDING, MILLING, OR SAWING ANY ITEMS PAINTED W/THIS PRODUCT.
Ventilation:LOCAL EXHAUST PREFERABLE TO NATURAL DILUTION.
Protective Gloves:RECOMMENDED, SOLVENT RESISTANT
Eye Protection:FACE SHIELD OR GOGGLES
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS THOROUGHLY W/SOAP & WATER AFTER USE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:148-400F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:61
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS, HEAT, & OPEN FLAMES
==================== Disposal Considerations ====================
Waste Disposal Methods:SHOVEL INTO DRUMS. INCINERATE IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|