===================== Product Identification =====================
MSDS NAME:RD8-1478 BROWN SILICONE ALKYD
NIIN:01-263-9798
MSDS Number: BRNSX
=== Responsible Party ===
Company:NILES CHEMICAL PAINT CO
Address:225 FORT ST
Box:307
City:NILES
State:MI
ZIP:49120
Country:US
Info Phone Num:616-683-3377 OR 219-236-5856
Emergency Phone Num:616-683-3377 OR 219-236-5856
Preparer's Name:MIKE LICHATOWICH
CAGE:02388
=== Contractor Identification ===
Company:NILES CHEMICAL PAINT
Address:225 FORT STREET
Box:307
City:NILES
State:MI
ZIP:49120
Country:US
Phone:616-683-3377/219-236-5856
CAGE:02388
============= Composition/Information on Ingredients =============
Name:MINERAL SPIRITS (VAPOR PRESSURE .0 MM HG @ 20C)
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 34%
Other REC Limits:NONE SPECIFIED
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293
Name:SILICONE ALKYD
Fraction by Wt: 30%
Other REC Limits:NONE SPECIFIED
Name:COBALT COMPOUNDS (AS CO) (SARA III)
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: <1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.1 MG/M3;AS CO
ACGIH TLV:0.05 MG/M3;DUST 9293
Name:MANGANESE COMPOUNDS (AS MN) (SARA III)
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: <1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:(C) 5 MG/M3 DUST
ACGIH TLV:5 MG/M3 DUST 9293
Name:VOC: 3.41 LBS/GAL
RTECS #:9999999VO
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE: SEVERE IRRIT, TEARING,
REDNESS, BLURRED VISION. SKIN: REDNESS, IRRIT, DEFATTING
(DERMATITIS). INHAL: NASAL & RESP IRRIT, CNS DEPRESSION (DIZZINESS,
DROWSINESS, WEAKNESS, FATIGUE, CONFUSION ) NAUSEA, HEADACHE,
VERTIGO, UNCONSCIOUSNESS, ASPHYXIATION. INGEST: GI IRRIT, ABDOMINL
PAIN, NAUSEA, VOMITING, DIARRHEA.
Effects of Overexposure:CHRONIC: DERMATITIS.
TARGET ORGANS: EYES, SKIN, RESPIRATORY SYSTEM, CNS.
Medical Cond Aggravated by Exposure:NONE KNOWN
======================= First Aid Measures =======================
First Aid:INHAL: MOVE TO FRESH AIR IMMED. IF BREATH STOPPED, GIVE ARTIF
RESP. GET MED AID ASAP. SKIN: IMMED FLUSH W/WATER. IF PENETRATES
CLOTHES, IMMED REMOVE CONTAM CLOTHES & FLUSH SKIN W/WATER. GET MED
AID. W ASH CLOTHES & DECONTAM SHOES BEFORE REUSE. EYE: IMMED FLUSH
W/WATER 15 MIN. LIFT EYELIDS. GET MED AID IMMED. INGEST: DRINK 1-2
GLASSES WATER. DONT INDUCE VOMIT. SEE DR/POISON CTR. TREAT
SYMPTOMS.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:86.0F,30.0C
Lower Limits:0.9
Extinguishing Media:DRY CHEMICAL, FOAM, CO2
Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE IN POSITIVE
PRESSURE MODE & FULL PROTECTIVE CLOTHING. WATER MAY BE USED TO COOL
CLSD CNTNRS(PREVENT PRESSR BLDUP,AUTOIGNIT,EXPLOSION)
Unusual Fire/Explosion Hazard:KEEP CNTNR CLSD.VAPOR HEAVY,TRAVEL ON
GRND TO IGNIT.KEEP FROM IGNIT.CLSD CNTNR MAY EXPLODE W/HEAT. APPLIC
TO HOT SRFCS REQ CAUTION.OVEREXPOS TO DECOMP HLTH HZD.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCE. MINIMIZE BREATHING
OF VAPOR. AVOID SKIN CONTACT. ABSORB W/INERT MATERIAL (CLAY, SOIL,
ABSORBENT). SMALL: SHOVEL RECLAIMED LIQUID/ABSORBENT INTO DRUMS.
LRG: DIKE. RECLAIM IN TO DRUMS OR TANK TRUCK FOR DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID STORAGE IN HIGH TEMPERATURE
AREAS OR NEAR FIRE OR OPEN FLAME. KEEP CONTAINERS CLOSED WHEN NOT
IN USE. AVOID ROUGH HANDLING.
Other Precautions:CONTAINERS OF THIS MATERIAL MAY BE HAZARDOUS WHEN
EMPTY. DO NOT WELD OR FLAME CUT ON EMPTY DRUMS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR RESPIRATOR (TC-23C-75) FITTED 1/2 MASK OR
FULL FACEPIECE RESPIRATOR DURING AFTER APPLICATION UNLESS AIR
MONITORING DEMOSTRATES VAPOR/MIST LEVELS ARE BELOW APPLICABLE
LIMITS. FOLLOW RESPIRATOR MAN UFACTURER'S DIRECTIONS FOR USE.
Ventilation:VENT TO KEEP CONC BELOW PEL/TLV. REMOVE DECOMPOSITN PRODUCT
FORMED DURING WELDING/FLAME CUTTING. VENT VAPOR FROM BAKING.
Protective Gloves:WEAR CHEMICAL RESITANT-NITRILE OR VITON
Eye Protection:POTENTL CONTACT-GOGGLES,GLASSES,FACESHLD
Other Protective Equipment:WEAR CHEMICAL RESISTANT (NITRILE OR VITON)
CLOTHING AS NEEDED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH PROMPTLY WHEN SKIN CONTAMINATED. REMOVE
CLOTHING THAT BECOMES WET (AVOID FLAMMABILITY). WASH BEFORE REUSE.
Supplemental Safety and Health
WASH HANDS BEFORE EATING, SMOKING, OR USING RESTROOM.
================== Physical/Chemical Properties ==================
HCC:F3
Boiling Pt:B.P. Text:278 TO 398F
Vapor Density:> AIR
Spec Gravity:1.175
Viscosity:67 - 77 KU
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:SLIGHT
Appearance and Odor:LIQUID, ODOR OF SOLVENTS
Percent Volatiles by Volume:53.08
Corrosion Rate:MINIMAL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HIGH TEMPERATURES, SHOCK FROM DROPPING.
Hazardous Decomposition Products:CAN PRODUCE CARBON MONOXIDE AND CARBON
DIOXIDE
Conditions to Avoid Polymerization:HIGH TEMPERATURES, SHOCK FROM
DROPPING
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH APPLICABLE LOCAL,
STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
DAPCO NO. 18-4 PART B
| |
|
MIL-C-22750E 17875 WHITE EPOXY, F-09P328
| 13463-67-7
14808-60-7
64742-94-5
78-93-3
25068-38-6 |
|
MIL-C-22750E COMP B, F-09P400
| 67-63-0
68082-29-1 |
|
MIL-C-22750D COMP A 36320 GRAY
| 14807-96-6
71-36-3
78-93-3
13463-67-7
67-63-0
61790-53-2
14808-60-7
88384-96-7 |
|
MIL-C-22750D COMP B 36320 GRAY
| 1330-20-7
78-93-3
71-36-3
108-88-3
1675-54-3 |
|
EN ALKYD LUST QD BLACK 37038, ID 744702
| 8030-30-6
78-83-1
108-88-3
110190-14-2
142825-11-0
110-54-3
110-82-7
14807-96-6 |
|
EN ALKYD LUST QD OLIVE 34088 ID 744410
| 8030-30-6
78-83-1
108-88-3
142-82-5
110-54-3
71-36-3
14807-96-6
64475-85-0
110-19-0 |
|
INCONEL FILLER METAL 62 & 62T
| 7440-47-3
6596-57-0
7440-02-0
7440-03-1 |
|
SOLTROL 220, PURGING FLUID
| 64741-73-7 |
|
TT-E-490E (26270 GREY)
| 8043-92-3
14807-96-6
13463-67-7
12001-26-2
71-36-3 |
|
847564
| 7727-37-9 |
|
FINISH, FLOOR, NONBUFFING
| 111-77-3 |
|
AI-1084-93-6
| 10213-79-3 |
|
LUMOR X
| 64742-47-8 |
|
EA 9317, PART A
| 5026-74-4
7429-90-5
112926-00-8 |
|
EA 9317, PART B
| 112-57-2
90-72-2
112-24-3
112945-52-5 |
|
PREMIUM UNLEADED GASOLINE-91 OCTANE
| 8030-30-6
71-43-2
75-65-0
100-41-4
1634-04-4
108-88-3
95-63-6
1330-20-7 |
|
B24596BL PASTEL BLUE 25526
| 57-55-6
25265-77-4
1309-64-4 |
|
DETERGENT/BLEACH, LAUNDRY
| 6834-92-0
25155-30-0
497-19-8
7758-29-4 |
|
FP-903 PENETRANT
| 64742-46-7 |
|
RD8-1478 BROWN SILICONE ALKYD
| 8052-41-3
7440-48-4
7439-96-5 |
|
MIL-C-83286, BLACK, 17038, 03BK28
| |
|
CAT MIL-C-83286, BLACK, 17038, 03BK28CAT
| |
|
CHEVRON UNLEADED GASOLINE, PRODUCT CODE:CPS201110
| 8006-61-9
100-41-4
106-42-3
108-38-3
95-47-6
108-88-3
110-54-3
110-82-7
1634-04-4
71-43-2 |
|
EPON (R) RESIN 823
| 25068-38-6 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B 1/4, PART B
| 78-93-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B 1/4, PART B
| 78-93-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B 1/2, PART B
| 78-93-3
13463-67-7
1317-65-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B 1/2, PART B
| 78-93-3
13463-67-7
1317-65-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B-2, PART B
| 78-93-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
PR-1826 CLASS B, PART A
| 28064-14-4
15336-82-0
2530-83-8
1333-86-4
1317-65-3 |
|
PR-1826, B-2, PART B
| 78-93-3 |
|
PR-1826 ADHESION PROMOTER
| 78-93-3
25068-38-6
1760-24-3
780-69-8
67-63-0 |
|
MOLYKOTE 3402C BONDED LUBRICANT
| 1317-33-5
1309-64-4
1344-40-7
67-63-0
111-15-9
71-36-3 |
|
PR-1764 B-2, PART A
| 13423-61-5
1313-13-9
1330-20-7
102-06-7
61788-32-7 |
|
PR-1764 CLASS B-2, PART B
| 108-88-3
7440-02-0
9003-35-4 |
|
PR-1764 ADHESION PROMOTER
| 1070-10-6
68477-31-6
141-78-6
78-93-3
67-63-0 |
|
HYDRAZINE CHEMETES, ULR CHEMETS, VACUETTES
| |
|
NICKEL CADMIUM BATTERY (SEALED)
| 1310-58-3 |
|
P 22 FIXER FX 22.15
| 7783-18-8
10192-30-0
10196-04-0
872-50-4
7732-18-5 |
|
|