Search   
MSDS  : DEGREASER
CAS  : 9016-45-9
1330-20-7
8052-41-3
68476-86-8
NAME  : tergitol np-14, np-9
xylene, dimethylbenzene, xylol
stoddard solvent (petroleum distillate), mineral spirits
petronate l
hydrocarbon propellant, petroleum gases liquefied
===================== Product Identification =====================

MSDS NAME:DEGREASER
NIIN:00F029159
MSDS Number: BRVQP
=== Responsible Party ===
Company:TRADCO CORP
Address:1081 ROSEMARY BLVD
City:AKRON
State:OH
ZIP:44306
Country:US
Info Phone Num:216-773-7669
Emergency Phone Num:216-773-7669
CAGE:TRADC
=== Contractor Identification ===
Company:TRADCO CORP
Address:1081 ROSEMARY BLVD
City:AKRON
State:OH
ZIP:44306
Country:US
Phone:216-773-7669
CAGE:TRADC

============= Composition/Information on Ingredients =============

Name:TERGITOL NP-14, NP-9
CAS:9016-45-9
RTECS #:WZ4200000

Name:XYLENE, DIMETHYLBENZENE, XYLOL
CAS:1330-20-7
RTECS #:ZE2100000
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WJ8925000
Other REC Limits:525 MG/CUM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM; 9293

Name:PETRONATE L

Name:HYDROCARBON PROPELLANT, PETROLEUM GASES LIQUEFIED
SWEETENED, C3-7, A-46 *93-1*
CAS:68476-86-8

===================== Hazards Identification =====================

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE IRRITANT. PROLONGED
INHALATION OR REPEATED CONTACT CAN CAUSE NASAL & RESPIRATORY
IRRITATION; & MAY EVEN BE FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: REDNESS, TEARING, BLURRED VISION.
INHALATION: DIZZINESS, WEAKNESS, FATIGUE, NAUSEA, HEADACHES, & EVEN
DEATH.

======================= First Aid Measures =======================

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/PLENTY OF WATER.
INGESTION: INDUCE VOMITING & KEEP WARM. OBTAIN MEDICAL ATTENTION IN
ALL CASES.

===================== Fire Fighting Measures =====================

Flash Point:100F
Lower Limits:1.0%
Upper Limits:5%
Extinguishing Media:REGULAR FOAM, CO2, OR DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL
ALONG THE GROUND & IGNITE BY PILOT LIGHTS.

================== Accidental Release Measures ==================

Spill Release Procedures:ABSORB LIQUID ON PAPER VERMICULITE, FLOOR
ABSORBENT MATERIAL, ELIMINATE ALL IGNITION SOURCES.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE IN A COOL DRY PLACE. TREAT EMPTY
CONTAINERS AS THEY ARE FULL, RESIDUE & VAPORS WILL STILL BE
PRESENT.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:APPROVED AIR SUPPLIED RESPIRATOR IS ADVISED IN
ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
Ventilation:LOCAL EXHAUST
Protective Gloves:NITRILE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS
Supplemental Safety and Health

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:300F
Vapor Pres:2.0
Vapor Density:3.7
Spec Gravity:.780
Evaporation Rate & Reference:(BU AC = 1): 70.00
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:FLAME & HEAT

==================== Disposal Considerations ====================

Waste Disposal Methods:ALLOW VOLATILE PORTION TO EVAPORATE IN HOOD.
ALLOW SUFFICIENT TIME FOR VAPORS TO COMPLETELY CLEAR HOOD & DUCT
WORK. DISPOSE IN ACCORDANCE W/LOCAL, FEDERAL, STATE, & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
BACKGROUND DYE 7350 COPPER 6408-31-7
7440-47-3
BACKGROUND DYE 7320 GOLD 10127-27-2
7440-47-3
BACKGROUND DYE 7415 BRONZE 7440-50-8
9005-25-8
GE012 70131-67-8
4253-34-3
KS-20 LIQUID SPRAY REMOVER 5/GL 75-09-2
67-63-0
64-17-5
67-56-1
ARIDRY J-82 1317-60-8
14464-46-1
14808-60-7
27136-73-8
64741-88-4
ALKYD FLAT, S-G & EG-SHEL FINISHES-CLASSIC 99 SEMI-GLOSS 471-34-1
13463-67-7
14807-96-6
64742-88-7
107-21-1
64742-47-8
ALKYD FLAT, S-G & EG-SHEL FINISHES-CLASSIC 99 VELVET 107-21-1
64742-47-8
64742-88-7
14807-96-6
471-34-1
13463-67-7
Y14 A 31 ALKYD EG-SHEL ENAMEL,BASE R NEUTRAL 64742-88-7
14807-96-6
ALKYD FLAT, S-G & EG-SHEL FINISHES-PROMAR 200 SEMI-GLOSS 107-21-1
64742-47-8
64742-88-7
14807-96-6
471-34-1
13463-67-7
B34 W 400 BRILLIANT WHITE PROMAR 400 SEMI-GLOSS 107-21-1
64742-47-8
64742-88-7
471-34-1
13463-67-7
ALKYD FLAT, S-G & EG-SHEL FINISHES-PROMAR SEMI-GLOSS 107-21-1
64742-47-8
64742-88-7
471-34-1
13463-67-7
ALKYD FLAT, S-G & EG-SHEL FINISHES-PROMAR 200 EG-SHEL 107-21-1
64742-47-8
64742-88-7
14807-96-6
471-34-1
13463-67-7
ALKYD FLAT, S-G & EG-SHEL FINISHES-PROMAR EG-SHEL 471-34-1
13463-67-7
14807-96-6
107-21-1
64742-47-8
64742-88-7
DEGREASER 9016-45-9
1330-20-7
8052-41-3
68476-86-8
CWT-920 1310-58-3
64665-57-2
HEMATOLOGY RINSE 32 OZ./1 GAL/5 GAL
N-HEXANE 110-54-3
3M DRY SILVER PAPERS TYPES 7772 119-47-1
7789-47-1
9004-35-7
63148-65-2
2489-05-6
112-85-6
6R324 BLACK DRY INK 5775 9003-55-8
1333-86-4
1309-37-1
8050-09-7
3843-16-1
DS-811 DUFFY'S PAINT & VARNISH REMOVER 75-09-2
108-88-3
67-56-1
67-64-1
64741-41-9
LPS 2 INDUSTRIAL-STRENGTH LUBRICANT 64742-96-7
64742-53-6
124-38-9
02629 CUTTING OIL 64742-65-0
5585PP DUPONOL QC SURFACTANT 151-21-3
7732-18-5
REFRAC-T-BACK 66402-68-4
12182-53-5
7429-90-5
9003-01-4
101/102/110 COPPER/COPPER ALLOYS 7440-50-8
103/122 COPPER/COPPER ALLOYS 7440-50-8
7723-14-0
104/105/107 COPPER/COPPER ALLOYS 7440-22-4
7440-50-8
1450/1455/1457 COPPER/COPPER ALLOYS 7723-14-0
13494-80-9
7440-50-8
147 COPPER/COPPER ALLOYS 7704-34-9
7440-50-8
150 COPPER/COPPER ALLOYS 7440-67-7
7440-50-8
1620/165 COPPER/COPPER ALLOYS 7440-43-9
7440-50-8
7440-31-5
1813 COPPER/COPPER ALLOYS 7440-47-3
7440-43-9
7440-50-8
1814 COPPER/COPPER ALLOYS 7440-47-3
7440-67-7
7440-50-8
1870 COPPER/COPPER ALLOYS 7439-92-1
7440-50-8
1880/189/1895 COPPER/COPPER ALLOYS 7440-31-5
7439-96-5
7440-21-3
7440-50-8
210/220/226 COPPER/COPPER ALLOYS 1314-13-2
7440-50-8
230/234/240 COPPER/COPPER ALLOYS 7440-50-8
1314-13-2
260/270/272 COPPER/COPPER ALLOYS 1314-13-2
7440-50-8
314/316 COPPER/COPPER ALLOYS 1314-13-2
7439-92-1
7440-02-0
7440-50-8
318 COPPER/COPPER ALLOYS 7440-50-8
7440-02-0
7723-14-0
13494-80-9
1314-13-2
340/344/345 COPPER/COPPER ALLOYS 7440-50-8
7439-92-1
1314-13-2
350/353/360 COPPER/COPPER ALLOYS 1314-13-2
7440-50-8
7439-92-1
3533 COPPER/COPPER ALLOYS 7440-50-8
7439-92-1
7440-38-2
1314-13-2
371/377 COPPER/COPPER ALLOYS 7440-50-8
7439-92-1
1314-13-2
385/3858/3859 COPPER/COPPER ALLOYS 7440-50-8
7439-92-1
1314-13-2
3990/3991 COPPER/COPPER ALLOYS 7440-50-8
13494-80-9
1314-13-2
443 COPPER/COPPER ALLOYS 7440-50-8
7440-31-5
7440-38-2
1314-13-2
462/464/485 COPPER/COPPER ALLOYS 7439-92-1
7440-31-5
7440-50-8
1314-13-2
507/510 COPPER/COPPER ALLOYS 7440-31-5
7723-14-0
7440-50-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net