Search   
MSDS  : ICS/ARRAY APO DILUENT, 449380
CAS  : 139-33-3
26628-22-8
1310-73-2
NAME  : acetic acid, (ethylenedinitrilo) tetra-, disodium salt;
sodium azide (sara iii)
sodium hydroxide (sara iii)
===================== Product Identification =====================

MSDS NAME:ICS/ARRAY APO DILUENT, 449380
NIIN:00N043912
MSDS Number: BRZTC
=== Responsible Party ===
Company:BECKMAN INSTRUMENTS INC
Address:200 S KRAEMER BLVD
City:BREA
State:CA
ZIP:92621-6209
Country:US
Info Phone Num:800-854-3633
Emergency Phone Num:800-854-3633
CAGE:64595
=== Contractor Identification ===
Company:BECKMAN INSTRUMENTS INC
Address:200 S KRAEMER BLVD
Box:City:BREA
State:CA
ZIP:92621-6209
Country:US
Phone:800-854-3633
CAGE:64595

============= Composition/Information on Ingredients =============

Name:ACETIC ACID, (ETHYLENEDINITRILO) TETRA-, DISODIUM SALT;
(EDTA DISODIUM SALT)
CAS:139-33-3
RTECS #:AH4375000
OSHA PEL:N/K
ACGIH TLV:N/K

Name:SODIUM AZIDE (SARA III)
CAS:26628-22-8
RTECS #:VY8050000
OSHA PEL:0.3 MG/M3,C
ACGIH TLV:0.3 MG/M3,C
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:SODIUM HYDROXIDE (SARA III)
CAS:1310-73-2
RTECS #:WB4900000
OSHA PEL:2 MG/M3
ACGIH TLV:C 2 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE IRRITATION TO THE EYES AND
SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
OXYGEN/ARTIFICIAL RESPIRATION) . EYES: WASH WITH WATER FOR AT LEAST
15 MINUTES. IF SYMPTOMS PERSIST CONSULT MD IMMEDIATELY. SKIN: WASH
AFFECTE D AREAS WITH WATER. IF SYMPTOMS PERSISTCONSULT MD
IMMEDIATELY. INGEST: CONSULT MD IMMEDIATELY.

===================== Fire Fighting Measures =====================

Flash Point:NOT FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:AZIDE FORMS SHOCK SENSITIVE DERIVATIVES
WITH LEAD & COPPER PLUMBING. CARE MUST BE EXERCISED TO WASH WASTE
DOWN DRAIN WITH COPIOUS WATER.

================== Accidental Release Measures ==================

Spill Release Procedures:ABSORB ON INERT MATERIAL AND DISPOSE AS NORMAL
TRASH OR RINSE DOWN DRAIN WITH COPIOUS WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE ACCORDING TO PACKAGE DIRECTION
TO MAINTAIN EFFICIENCY.
Other Precautions:NONE

============= Exposure Controls/Personal Protection =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE.
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

================== Physical/Chemical Properties ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:18 @ 20C
Vapor Density:1
Spec Gravity:1 (H*2O=1)
pH:7
Evaporation Rate & Reference:1 (H*2O=1)
Solubility in Water:AQUEOUS SOLUTION
Appearance and Odor:CLEAR, COLORLESS, ODORLESS SOLUTION
Percent Volatiles by Volume:92

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE

==================== Disposal Considerations ====================

Waste Disposal Methods:DISPOSE ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
ENAMELITE 574-91 GRAY, 16187 13463-67-7
7727-43-7
8052-41-3
64742-95-6
MOLYKOTE D PASTE 8042-47-5
1305-62-0
7758-87-4
7620-77-1
68649-47-8
66161-52-2
CUPROUS CHLORIDE (ALKALINE) ORSAT FOR CO 7758-89-6
12125-02-9
1336-21-6
7732-18-5
OB STENSIL INK ALL COLORS 64742-52-5
8032-32-4
NUTMEG, 6140 FLOCCULANT
ECO-STUCK CONTACT CEMENT, 22-07 67-64-1
108-88-3
110-54-3
FINISH 2001 LIQUID T-27 8052-41-3
8008-20-6
7732-18-5
63148-62-9
66402-68-4
PLASTI PUTTI, PP
STERAMINE 1-G TABLETS 8001-54-5
TWA WHITE GROUND SUPPORT, 74F1-12 1569-01-3
111-76-2
78-92-2
71-43-2
64742-88-7
7440-48-4
7439-92-1
TRA-BOND 2116 RESIN 25068-38-6
TRA-BOND 2116 HARDENER 111-40-0
CANON 8X LASER TONER LT70R 1309-37-1
112945-52-5
CANON 8X LASER TONER LT71R 1309-37-1
112945-52-5
DIAMOND PASTE WATERBASE, DPW2-6 9038-95-3
25322-68-3
61791-00-2
112945-52-5
7782-40-3
AROCLOR 1232 SOLUTION AT 1UG/UL IN ISOOCTAN 540-81-1
11141-16-5
DYCLEAN 25155-30-0
STEEL BLUE LOW VOC LAYOUT FLUID 71-23-8
7664-41-7
SAFETAP STICK, 71907
SAFETAP STICK, 71908
AVALON W/SINTRO WHITE, 2400TS 64742-88-7
13701-59-2
8052-41-3
ACID EXTRACTABLES STANDARD 87-86-5
108-95-2
67-64-1
105-67-9
120-83-2
51-28-5
88-06-2
59-50-7
95-57-8
88-75-5
100-02-7
534-52-1
PREMIUM WATER REPELLANT SEALER VOC, 50822 107-21-1
1,1,1-TRICHLOROETHANE, 0-652 71-55-6
FIBERGLASS BUILDING INSULATION 65997-17-3
25104-55-6
50-00-0
108-95-2
7664-41-7
FIBERGLASS BLOWING WOOL INSULATION 108-95-2
7664-41-7
65997-17-3
25104-55-6
50-00-0
ICS/ARRAY APO DILUENT, 449330 139-33-3
26628-22-8
1310-73-2
ICS/ARRAY APO DILUENT, 449380 139-33-3
26628-22-8
1310-73-2
MITSUBISHI (PORTLAND CEMENT) 65997-15-1
E-Z SEAL WATERPROOF SEALER
CHLOROFORM, 0-623 67-66-3
AQUATATE, 0207 85-00-7
GREEN HI-GLOSS LATEX CURB MARK, 108-264 111-76-2
78-92-2
1344-37-2
112-34-5
7439-96-5
7664-41-7
7440-48-4
CB-260, 1724 7757-83-7
WHITE GALVANIZED & METAL PRIMER, W2105 57-55-6
25265-77-4
1314-13-2
7732-18-5
1317-65-3
13463-67-7
DECRARUST VISTA GREEN, 060-0503 1308-38-9
64742-88-7
AQUAFLOC 408, 35-408
B-2 BUFFER, 655901 57-44-3
144-02-5
TACO 100
GENERAL PURPOSE EPOXY PART A 25085-99-8
6809-97-2
GENERAL PURPOSE EPOXY PART B 6811-71-9
CONTACT KLEEN 71-55-6
67-63-0
8012-95-1
124-38-9
61791-10-4
76-13-1
METHYL ALCOHOL 67-56-1
TPC-1 DEVELOPER 1309-37-1
1314-13-2
SF-970NTI/TI 1333-86-4
AREMCO-BOND 631 BASE 25068-38-6
AREMCO-BOND 631 ACTIVATOR 25068-38-6
INTERSLEEK TIE COAT ACCELERATOR, XMH115 1330-20-7
ELASTOMER TOPCOAT GRAY, AAA027 1330-20-7
1317-95-9
ELASTOMER TOP COAT REACTOR, AAA030 1330-20-7
110-12-3
5124-30-1
78-10-4

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net