===================== Product Identification =====================
MSDS NAME:UC65040 ARCHITECTURAL GLOSS WHITE TRIM
NIIN:00-515-1596
MSDS Number: BSFPD
=== Responsible Party ===
Company:PPG INDUSTRIES, INC
Address:4325 ROSANNA DRIVE
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Info Phone Num:412-492-5555/800-441-9695
Emergency Phone Num:304-843-1300
CAGE:DO894
=== Contractor Identification ===
Company:PPG INDUSTRIES, INC.
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Country:US
Phone:412-592-5555
CAGE:DO894
============= Composition/Information on Ingredients =============
Name:TITANIUM DIOXIDE 2101
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 30-35%
Other REC Limits:PPG-IPEL:10 MG/M3
OSHA PEL:10 MG/M3
ACGIH TLV:10 MG/M3
Name:HYDROTREATED LIGHT DISTILLATE
CAS:64742-47-8
Fraction by Wt: 10-15%
Other REC Limits:NONE SPECIFIED
Name:XYLENE (SARA III) (RQ 1000 LBS)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 1-2%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM/STEL 150 PPM
ACGIH TLV:100 PPM/STEL 150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:MINERAL SPIRITS
CAS:64741-92-0
Fraction by Wt: 10-15%
Other REC Limits:NONE SPECIFIED
Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 35-40%
Other REC Limits:NONE SPECIFIED
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION: HARMFUL OR FATAL. EYE: EYE
IRRITATION. SKIN: MODERATE SKIN IRRITATION. INHALATION: VAPOR/SPRAY
MIST HARMFUL. IRRITATES EYE, NOSE & THROAT. IRRITATION OF RESP
SYSTEM & PERMANENT BRAIN & NERV OUS SYSTEM DAMAGE. CONCENTRATING &
INHALING CONTENTS CAN BE HARMFUL OR FATAL.
Explanation of Carcinogenicity:HYDROTREATED LIGHT DISTILLATE IS
CARCINOGENIC ACCORDING TO CRITERIA ESTABLISHED BY UNKNOWN SOURCE.
Effects of Overexposure:EYE WATERING, HEADACHE, NAUSEA, DIZZINESS,
UNCOORDINATION ARE INDICATIONS THAT SOLVENT LEVELS ARE TOO HIGH.
REDNESS, ITCHING, BURNING SENSATION AND VISUAL DISTURBANCES MAY
INDICATE EXCESSIVE EYE CONTA CT. DRYNESS, ITCHING, CRACKING,
BURNING, REDNESS, AND SWELLING ARE CONDITIONS ASSOCIATED WITH
EXCESSIVE SKIN CONTACT.
======================= First Aid Measures =======================
First Aid:INGESTION: DONT INDUCE VOMITING. EYE: FLUSH EYES IMMEDIATELY
WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN: FLUSH
IMMEDIATELY WITH PLENTY OF WATER FOLLOWED BY WASHING WITH SOAP &
WATER. INHALATIO N: REMOVE TO FRESH AIR. APPLY ARTIFICIAL
RESPIRATION & OTHER SUPPORTIVE MEASURES AS REQUIRED. OTHER: IF ANY
TYPE OF OVEREXPOSURE, CONTACT POISON CONTROL CTR, EMERGENCY ROOM OR
DR. HAVE MSDS AVAILABLE.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1.0
Extinguishing Media:NFPA CLASS B EXTINGUISHERS (CO2, DRY CHEMICAL,
UNIVERSAL AQUEOUS FILM FORMING FOAM) FOR CLASS II COMBUSTIBLE
LIQUID FIRE
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE, USE (FOG
NOZZLES PREFERRED) TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE
BLDUP, AUTOIGNITION, EXPLOSION W/HEAT. WEAR SCBA.
Unusual Fire/Explosion Hazard:KEEP CONTAINER CLSD. KEEP FROM
HEAT/IGNITION SOURCES. CLOSED CONTAINER MAY EXPLODE W/HEAT. DONT
APPLY ON HOT SURFACES. TOXIC GASES MAY FORM W/FLAME/HOT SURFACES
================== Accidental Release Measures ==================
Spill Release Procedures:PROVIDE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED WITH PROPER RESPIRATORY, SKIN, & EYE PROTECTION SHOULD BE
PERMITTED IN AREA. REMOVE ALL IGNITION SOURCES. TAKE UP SPILLED
MAT'L WITH SAWDUST, VERMI CULITE, OTHER ABOSRBENT MAT'L & PLACE IN
CNTNRS.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDING DESIGNED & PROTECTED FOR STORAGE OF NFPA
CLASS II COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATERIAL PART OF MULTIPLE COMPONENT SYSTEM, READ
MATERIAL DATA SHEETS FOR OTHER COMPONENT(S) BEFORE BLENDING AS
RESULTING MIX MAY HAVE HAZARDS OF PARTS. GROUND CONTAINERS WHEN
POURING. AVOID FREE F AL OF LIQUIDS IN EXCESS OF FEW INCHES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:OVEREXPOSURE TO VAPOR MAY BE PREVENTED BY
ENSURING VENT CONTROLS, VAPOR EXHAUST OR FRESH AIR ENTRY.
NIOSH/MSHA (TC-23C) AIR PURIFYING OR AIR SUPPLIED (TC-19C)
RESPIRATOR MAY ALSO REDUCE EXPOSURE. READ RESPIRATOR MFR'S
INSTRUCTIONS.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST TO KEEP CONCENTRATION
BELOW TLV, PEL, LEL & REMOVE DECOMPOSITION PRODUCTS.
Protective Gloves:NEOPRENE, NITRILE, LATEX RUBBER GLOVES
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:CLEAN/DISCARD CONTAM CLOTHING & SHOES. WEAR
PROTECTIVE CLOTHING: IMPERMEABLE APRON (NEOPRENE, NITRILE, LATEX
RUBBER).
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:138 TO 242C
Vapor Pres:1.2
Vapor Density:> AIR
Spec Gravity:1.24
Evaporation Rate & Reference:11 (BU AC=1)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID WITH AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGREDIENT
Percent Volatiles by Volume:44.30
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:MAY PRODUCE HAZARDOUS DECOMPOSITION
PRODUCTS WHEN HEATED. WELDING, BRAZING, FLAME CUTTING MAY PRODUCE:
CARBON MONOXIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
AMDRO FIRE ANT INSECTICIDE
| 67585-29-4 |
|
SKASOL 447
| 2809-21-4 |
|
PURPLE K DRY CHEMICAL
| 1317-65-3
1332-58-7
12001-26-2
298-14-6
7727-37-9 |
|
(TM) 2216B/A PART A GREY EPOXY ADHESIVE
| 1332-58-7
1333-86-4 |
|
RECHARGEABLE BATTERIES,PS-6100
| 7439-92-1
7664-93-9
1317-36-8 |
|
POLY V PLASTIC BLAST MEDIA
| 25852-37-3
80-62-6 |
|
407671-000 NICKEL-CADMIUM SEALED CELL BATTERY
| 7440-43-9
1306-19-0
7440-02-0
12054-48-7
1313-99-1 |
|
PERMA-LOK (R) LH 150
| 109-17-1 |
|
AUTOMOTIVE, COMMERCIAL, INDUSTRIAL LEAD ACID BATTERIES
| 7664-93-9
7439-92-1
7440-36-0
7440-38-2
7440-31-5 |
|
LASER PRINTER TONER
| 25153-46-2
1317-61-9
1333-86-4 |
|
PS12260, POWER-SONIC RECHARGEABLE SEALED LEAD-ACID BATTERY
| 7664-93-9
7439-92-1 |
|
SEAM SEALANT 2,K-KOTE SEAM SEALER,83-234 C
| 108-88-3
67-63-0
78-93-3 |
|
F034ND BLACK TONER
| 1333-86-4
31714-55-3 |
|
EUTECTRODE XHD 6868;ARC WELDING ELECTRODE
| 7439-89-6
7440-47-3
7440-02-0
1312-76-1
13463-67-7
6834-92-0
1317-65-3
1344-28-1
1633-05-2
112945-52-5
1333-88-6 |
|
PERCLENE DRYCLEANING GRADE
| 127-18-4
630-20-6
79-01-6 |
|
DURALENE GROVE HYDRAULIC OIL
| |
|
TEFLON NON STICK FINISH BLACK
| 1333-86-4
71-36-3
108-10-1
112-34-5
64742-89-8
872-50-4 |
|
TERSAN LSR TURF FUNGICIDE
| 30525-89-4 |
|
THINNER
| 98-55-5 |
|
TC-W TWO CYCLE OIL (ALT. FORMULA)
| 8008-20-6
64742-65-0
72623-83-7 |
|
NADIC METHYL ANHYDRIDE
| 25134-21-8 |
|
VARNISH, INTERIOR, FLOOR AND TRIM
| 8052-41-3
64742-95-6 |
|
THINNER, CELLULOSE ACETATE BUTYRATE DOPE
| 141-78-6
78-93-3
123-86-4
123-42-2
64-17-5 |
|
SODIUM HYDROXIDE
| 1310-73-2 |
|
A/S TT-E-T08C TYPE I & II, FS22-300
| 8052-41-3 |
|
GLASS CLEANER (LIQUID)
| 67-63-0
1336-21-6
111-76-2 |
|
NATRASORB M (CLAY)
| 14808-60-7 |
|
ROYCO 431R
| 64742-54-7 |
|
THINNER, PAINT
| 64742-47-8 |
|
GLYCOL ETHER EE ACETATE
| 111-15-9
110-80-5
64-19-7 |
|
WAX, PASTE
| 8052-41-3 |
|
LYSOL BRAND PINE CLEANER
| 64-17-5
90-43-7
120-32-1 |
|
ENAMEL, ALKYD, GLOSS, LO VOC CT BROWN 10080
| 1330-20-7
123-86-4
78-93-3
110-12-3
64475-85-0
8032-32-4 |
|
ENAMEL ALKYD, GLOSS, LO VOC CT GREEN 14110, ID 774422
| 1330-20-7
123-86-4
78-93-3
110-12-3
64475-85-0
8032-32-4 |
|
A/S TT-E-508C, TYPE I & II, FS22-300
| 8052-41-3 |
|
A/S TT-E-508C TYPE I & II, FS22-300
| 8052-41-3 |
|
PUMIE SCOURING STICK
| |
|
BLACK, STENCIL PAINT 37038
| 64742-89-8
108-88-3 |
|
ENAMEL, ALKYD, GLOSS, LO VOC CT GREEN 14062, ID
| 1330-20-7
64742-95-6
123-86-4
110-12-3
14808-60-7
1317-95-9
78-93-3
64475-85-0
8032-32-4 |
|
GREASE,KS-7471
| |
|
SOLDER ALLOYS OF PB,SN,AG,BI,SB,& IN
| 7439-92-1
7440-31-5
7440-22-4
7440-69-9
7440-36-0
7440-74-6 |
|
UC65040 ARCHITECTURAL GLOSS WHITE TRIM
| 13463-67-7
64742-47-8
1330-20-7
64741-92-0 |
|
L-XXX-7399 LATEX FLAT WALL
| 107-21-1 |
|
MARSOL 48
| 108-88-3
64742-89-8
142-82-5
78-93-3
141-78-6
67-63-0 |
|
BRAYCO 363
| |
|
ACTIVATED CARBON
| 7440-44-0 |
|
L-XXX-7342 LATEX FLAT WALL
| 107-21-1 |
|
NON-PENETRATING, FLAT, PAINT OIL
| 1317-80-2
14808-60-7
1317-65-3
14807-96-6
8052-41-3 |
|
STYLE 3030 I VALVE PACKING
| 12001-29-5 |
|
NICKEL-CADMIUM BATTERY
| 25135-51-7
1313-99-1
7782-42-5
1310-58-3
1306-19-0 |
|
|