===================== Product Identification =====================
MSDS NAME:PRC RUBBER CALK 3096 SEALANT, PART A
NIIN:00N040847
Kit Part:Y
MSDS Number: BSFYB
=== Responsible Party ===
Company:PRODUCTS RESEARCH & CHEMICAL CORP
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Info Phone Num:818-240-2060
Emergency Phone Num:818-240-2060
CAGE:DO563
=== Contractor Identification ===
Company:PRC-DESOTO INTERNATIONAL, INC. A PPG INDUSTRIES COMPANY
Address:5430 SAN FERNANDO RD
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Country:US
Phone:818-240-2060
CAGE:83574
Company:PRODUCTS RESEARCH & CHEMICAL
Address:NOW DBA COURTAULDS AEROSPACE
Box:1800
City:GLENDALE
State:CA
ZIP:91209
Phone:818-240-2060
CAGE:DO563
============= Composition/Information on Ingredients =============
Name:POLYETHER POLYOL POLYMER W/TOLUENE DIISOCYANATE (MFR CAS
NO: 39279-01-1). PEL/TLV AS TOLUENE DIISOCYANATE.
CAS:9057-91-4
OSHA PEL:0.005 PPM;0.02 STEL
ACGIH TLV:0.005 PPM;0.02 STEL
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES:IRRITATION, WATERING & POSSIBLE
REVERSIBLE CORNEAL DAMAGE. SKIN:LOCAL IRRITATION & DISCOLORATION.
MAY CAUSE ALLERGIC RASH IN SENSITIZED INDIVIDUALS. INHAL:IRRITATION
OF NOSE, THROAT, LUNGS & EYES , W/WATERING EYES, SORENESS IN THROAT
&TIGHTNESS IN CHEST W/POSSIBLE DIFFICULTY IN BREATHING. MAY (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:TOLUENE DIISOCYANATE:ANTIC TO BE A
CARCIN (NTP 6TH ANN RPT, '91), GRP 2B (IARC SUPP7, P72, '87).
Effects of Overexposure:HLTH HAZ:PRODUCE ASTHMA-LIKE SYMPTOMS IN
SENSITIZED INDIVIDUALS. INGEST:IRRITATION & POSSIBLE CORROSIVE
ACTION IN MOUTH, STOMACH TISSUE & DIGESTIVE TRACT.
Medical Cond Aggravated by Exposure:INDIVIDUALS SUFFERING FROM ASTHMA
OR OTHER CHRONIC RESPIRATORY CONDITIONS MAY EXHIBIT A HEIGHTENED
SENSITIVITY TO ISOCYANATES & SHOULD AVOID INHALATION EXPOSURE.
======================= First Aid Measures =======================
Eyes:FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MINUTES, CONSULT
MD. SKIN:WASH W/SOAP & WATER, CONSULT MD. INHAL:REMOVE TO FRESH
AIR. CONSULT MD. INGEST:GIVE MILK OR WATER TO DRINK. CONSULT MD.
===================== Fire Fighting Measures =====================
Flash Point:NOT FLAMMABLE
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . USE WATER TO COOL HEAT EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES MAY CAUSE PRESSURE
BUILDUP IN CLOSED CONTAINERS.
================== Accidental Release Measures ==================
Spill Release Procedures:COVER W/ABSORBANT MATERIAL, ADD DECONTAM
SOLUTION (5% CONCENTRATED AMMONIA, 2% DETERGENT, 93% WATER) & ALLOW
TO REACT FOR 10 MINS. COLLECT IN CNTNRS, ADD ADDNL DECONTAM
SOLUTION & KEEP LOOSELY COVERED FOR 48 HOURS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID MOISTURE CONTAMINATION WHICH
WILL CAUSE CO*2 PRESSURE. DO NOT RESEAL CONTAINERS IF MOISTURE
CONTAMINATION IS SUSPECTED. AVOID INGESTION.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN USING IN CONFINED AREAS, OR IN OTHER
CIRCUMSTANCES LIKELY TO PRODUCE AIRBORNE LEVELS OF ISOCYANATE IN
EXCESS OF TLV USE A NIOSH/MSHA APPROVED AIR-SUPPLIED RESPIRATOR.
Ventilation:GENERAL VENTILATION TO MAINTAIN VAPORS BELOW TLV.
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS (SUPDAT)
Other Protective Equipment:EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER. EYE PROT: GOGGLES AND FULL LENGTH
FACESHIELD .
================== Physical/Chemical Properties ==================
Spec Gravity:1.06
Solubility in Water:NEGLIGIBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOL, AMINES, STRONG BASES.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN; POSSIBLE
TRACES OF HCN.
==================== Disposal Considerations ====================
Waste Disposal Methods:NOT A HAZARDOUS WASTE ACCORDING TO EPA
REGULATIONS. CONSULT FEDERAL, STATE & LOCAL REGULATIONS PRIOR TO
DISPOSAL OF SPILLAGE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|