| MSDS | : | CATEGORY 1-B STAINLESS & SPECIALTY STEELS | | CAS | : | 7439-89-6
7439-96-5
7440-21-3
7440-47-3
7440-02-0
7439-98-7
13463-67-7
7440-03-1
7440-50-8
7429-90-5
7440-33-7 | | NAME | : | iron
manganese, mn compounds
silicon
chromium metal, chromium, chrome (suspected a1 human
nickel (soluble) (suspected human carcinogen by ntp, iarc,
molybdenum (soluble compound), lead molybdate
titanium dioxide, tio2
columbium, niobium *93-3*
copper (dust & mist), bronze powder
aluminum (powder)
tungsten (insoluble), wolfram
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:CATEGORY 1-B STAINLESS & SPECIALTY STEELS
NIIN:00F030654
MSDS Number: BSLMP
=== Responsible Party ===
Company:ALLEGHENY LUDLUM STEEL CORP
Address:RIVER RD
City:BRACKENRIDGE
State:PA
ZIP:15014
Country:US
Info Phone Num:412-224-1000
Emergency Phone Num:412-339-5059
Preparer's Name:W. D. EDSALL
CAGE:80710
=== Contractor Identification ===
Company:ALLEGHENY LUDLUM STEEL CORP
Address:BRACKENRIDGE WORKS, RIVER AVE
Box:City:BRACKENRIDGE
State:PA
ZIP:15014
Country:US
CAGE:80710
Company:FELKER BROTHERS CORPORATION
CAGE:93516
============= Composition/Information on Ingredients =============
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 52.3-78%
OSHA PEL:10 MG/CUM
ACGIH TLV:5 MG/CUM
Name:MANGANESE, MN COMPOUNDS
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 2%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM (DUST)
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: 4.5%
OSHA PEL:10 MG/CUM TOTAL DUST
ACGIH TLV:10 MG/CUM
Name:CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN
CARCINOGEN BY IARC, NTP & ACGIH)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 12-21%
OSHA PEL:1 MG/CUM
ACGIH TLV:0.5 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
ACGIH) INTENDED CHANGE (IC)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 6-17.5%
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/CUM
ACGIH TLV:0.05 MG/CUM IC
Name:MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 5%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 0.7%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)
Name:COLUMBIUM, NIOBIUM *93-3*
CAS:7440-03-1
Fraction by Wt: 1%
Other REC Limits:5 MG/CUM
OSHA PEL:15 MG/CUM TOTAL DUST
ACGIH TLV:10 MG/CUM TOTAL DUST
Name:COPPER (DUST & MIST), BRONZE POWDER
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.5%
Other REC Limits:1 MG(CU)/M3 (DUST)
OSHA PEL:0.1 MG(CU)/M3 (FUME)
ACGIH TLV:0.2 MG/M3 (FUME)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ALUMINUM (POWDER)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 1.5%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)
Name:TUNGSTEN (INSOLUBLE), WOLFRAM
CAS:7440-33-7
RTECS #:YO7175000
Fraction by Wt: 1.8%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY/MUCOUS
MEMBRANE IRRITATION, METAL FUME FEVER. IRON OXIDE: BENIGN
PNEUMOCONIOSIS & CNS EFFECTS & LUNG DAMAGE. TUNGSTEN: RESPIRATORY
DISORDERS. TITANIUM DIOXIDE: PRIMARY IRRITANT . COLUMBIUM:
INTERFERES W/CALCIUM AS ANACTIVATOR. COPPER: WILSON'S DISEASE.
NICKEL: NICKEL ITCH & DERMATITIS.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:METAL FUME FEVER: CHILLS, FEVER, METALLIC TASTE
IN MOUTH, DRYNESS/IRRITATION OF THROAT.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/PLENTY OF
WATER. SKIN: WASH W/SOAP & WATER. INGESTION: GIVE 1-2 GLASSES OF
WATER OR MILK. INDUCE VOMITING IF FULLY CONSCIOUS & NOT CONVULSING.
OBTAIN MED ICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Fire Fighting Procedures:STEEL PRODUCTS DON'T CONSTITUTE FIRE &
EXPLOSION HAZARD. HOWEVER, DUST GENERATED DURING GRINDING & CUTTING
OPERATIONS MAY PRESENT A FIRE & EXPLOSION HAZARD.
Unusual Fire/Explosion Hazard:COATINGS, WHICH ARE APPLIED AT THE
CUSTOMER'S REQUIRES, MAY BE COMBUSTIBLE.
================== Accidental Release Measures ==================
Spill Release Procedures:MATERIAL IS SOLID FORM. FOR DUST, USE METHODS
WHICH AVOID GENERATION SUCH AS DRY OR WET VACUUMING. COMPRESSED AIR
SHOULD NOT BE USED TO CLEAN UP SPILLS OF DUST. PROVIDE VENTILATION.
USE PROTECTIVE EQU IPMENT. COLLECT IN APPROPRIATE LABELED
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:POSSIBLE PRESENCE OF COATINGS SHOULD
BE RECOGNIZED & CONSIDERED WHEN EVALUATING POTENTIAL HAZARDS &
EXPOSURES DURING DUST/FUME GENERATING ACTIVITIES.
Other Precautions:STEEL PRODUCTS IN THEIR USUAL PHYSICAL FORM DON'T
POSE ANY HEALTH HAZARD. HOWEVER, WHEN SUBJECTED TO
WELDING/BURNING/SAWING/BRAZING/GRINDING, POTENTIALLY HAZARDOUS
FUMES/DUST MAY BE GENERATED. THESE F UMES/DUSTS MUST BE CONTROLLED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS WHEN
EXPOSURE LEVELS ARE ABOVE TLV'S.
Ventilation:LOCAL EXHAUST TO KEEP BELOW EXPOSURE LIMITS DURING WELDING
& GRINDING OPERATIONS. DILUTION IS ACCEPTABLE.
Protective Gloves:REQUIRED
Eye Protection:REQUIRED
Supplemental Safety and Health
ITEMS: 316LN, 317, 317L, 317LX, 317XN, 321, 321H, 347, 348, 370, 808,
850, 13-8 PH. THE PERCENT COMPOSITION REFLECTS THE RANGE THAT IS
POSSIBLE W/IN THIS GROUP OR PRODUCTS. THESE ARE NOT THE TECHNICAL
SPECIFICATIONS FOR A PARTICULAR PRODUCT. SPECIFIC GRADES MAY NOT
INCLUDE ALL THE HAZARDOUS INGREDIENTS.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:2800F
Spec Gravity:7.6-7.8
Appearance and Odor:GRAY SOLID, ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Hazardous Decomposition Products:HYDROGEN GAS, METAL FUMES: IRON OXIDE,
MANGANESE, CHROMIUM, NICKEL, MOLYBDENUM (INSOLUBLE FORM) & TITANIUM
DIOXIDE
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|