| MSDS | : | TURBALOY X | | CAS | : | 7440-48-4
7439-98-7
7440-33-7
7439-89-6
7440-47-3
7440-02-0 | | NAME | : | cobalt
molybdenum (soluble compound), lead molybdate
tungsten (insoluble), wolfram
iron
chromium metal, chromium, chrome (suspected a1 human
nickel (soluble) (suspected human carcinogen by ntp, iarc,
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:TURBALOY X
NIIN:00F032932
MSDS Number: BTBJM
=== Responsible Party ===
Company:UNITED STATES WELDING CORP
Address:20700 DEARBORN STREET
City:CHATSWORTH
State:CA
ZIP:91311-5912
Country:US
Info Phone Num:818-341-2021
Emergency Phone Num:818-341-2021
Preparer's Name:JORGE JACOBS
CAGE:58401
=== Contractor Identification ===
Company:UNITED STATES WELDING CORP
Address:3579 HWY 50 E SUITE 104
Box:City:CARSON CITY
State:NV
ZIP:89701-2807
Country:US
Phone:775-883-7878
CAGE:58401
============= Composition/Information on Ingredients =============
Name:COBALT
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 1.5%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/CUM
ACGIH TLV:0.05 MG/CUM
Name:MOLYBDENUM (SOLUBLE COMPOUND), LEAD MOLYBDATE
CAS:7439-98-7
RTECS #:QA4680000
Fraction by Wt: 9%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM
Name:TUNGSTEN (INSOLUBLE), WOLFRAM
CAS:7440-33-7
RTECS #:YO7175000
Fraction by Wt: .6%
ACGIH TLV:5 MG/CUM
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 18.5%
Name:CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN
CARCINOGEN BY IARC, NTP & ACGIH)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 22%
ACGIH TLV:0.5 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
ACGIH) INTENDED CHANGE (IC)
CAS:7440-02-0
RTECS #:QR5950000
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/CUM
ACGIH TLV:0.05 MG/CUM IC
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF NOSE/THROAT.
CHRONIC: MAY RESULT IN NEUROLOGICAL DAMAGE, LUNG FIBROSIS,
PNEUMOCONIOSIS OTHER LUNG DISEASES. SOME TOXIC GASES MAY CAUSE
ASPHYXIATION & MAY BE FATAL.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, DRYNESS,
HEADACHE, BREATHING DIFFICULTY, FREQUENT COUGHING, CHEST PAIN,
PULMONARY EDEMA.
Medical Cond Aggravated by Exposure:IMPAIRED PULMONARY FUNCTION, AIRWAY
DISEASES & CONDITIONS SUCH AS ASTHMA, EMPHYSEMA, CHRONIC
BRONCHITIS.
======================= First Aid Measures =======================
Eyes: IMMEDIATELY WASH W/PLENTY OF WATER. SKIN: WASH AREA
W/SOAP/MILD DETERGENT FOR 5 MINS. IF IRRITATION PERSISITS SEEK
MEDICAL ATTENTION. INHALATION: REMOVE FROM EXPOSURE AREA & CALL FOR
MEDICAL ATT ENTION: ADMINISTER OXYGEN IF RESPIRATION IS DIFFICULT;
IF NOT BREATHING BEING ARTIFICAL RESPIRATION; IF PULSE NOT DETECTED
BEGIN EXTERNAL HEART MASSAGE. OBTAIN MEDICAL ATTENTION IN ALL
CASES.
===================== Fire Fighting Measures =====================
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:DRY CHEMICAL
Fire Fighting Procedures:SOLID FORM IS NOT COMBUSTIBLE UNDER NORMAL
CONDITIONS, USE FIRE FIGHTING METHODS THAT ARE APPROPRIATE FOR THE
SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:MOLTEN METAL ALLOYS MAY EXPLODE ON
CONTACT W/WATER; THEY MAY ALSO REACT VIOLENTLY W/WATER, RUST &
CERTAIN METAL OXIDES.
================== Accidental Release Measures ==================
Spill Release Procedures:NO SPECIAL CLEAN-UP PROBLEMS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH APPROVED RESPIRATORS
Ventilation:LOCAL EXHAUST
Protective Gloves:FLAMEPROOF WELDING
Eye Protection:SAFETY GLASSES UNDER WELDING HELMET.
Other Protective Equipment:APRON FOR WELDING
Work Hygienic Practices:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.
Supplemental Safety and Health
PRODUCT IN SOLID FORM UNDER NORMAL CONDITIONS. STATED HAZARDS APPLY
W/SUBSTANCE AS A GAS, VAPOR, DUST, OR MIST.
================== Physical/Chemical Properties ==================
HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:ODORLESS FILLER METAL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:METAL FUMES
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|